ELEGOO PLA+ Filament (Black, 1kg) Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
ELEGOO PLA+ in black is the spool to reach for when a print has to do a job: hooks, cable clips, phone stands, drawer handles and replacement knobs, where plain PLA tends to snap. That is our reason to pick it over ELEGOO's standard PLA. ELEGOO says this Plus formula has better mechanical properties than standard PLA, with more impact strength and toughness, while keeping a low print temperature, low warp and a glossy surface. The 1kg spool is 1.75mm with ±0.02mm accuracy, mechanically wound and hand inspected to cut tangles and breaks, then dried and vacuum sealed. Named compatible printers include Neptune, Bambu Lab P1P and P1S, Ender and Kobra models. No temperature range or toughness figure is listed, so the gain over PLA is a claim, not a number. We judged it from ELEGOO's listing; no hands-on printing was done.
What stands out
- Tougher than ELEGOO's plain PLA
- Low print temperature, low warp
- 1.75mm ±0.02mm
- Hand-inspected winding
Who it fits
Good fit for
Home makers printing clips, hooks, mounts and fixes that need to flex a little before breaking, on any common 1.75mm printer.
Who should skip it
Anyone needing heat resistance for a car or outdoor sun; PETG or ASA suits that better than any PLA+.
Verdict: A good black PLA+ for practical household parts, easy to print on almost any machine.
ELEGOO PLA+ black, what matters
PLA+ formula
More impact strength and toughness than standard PLA.
1.75mm ±0.02mm
Steady feeding.
Mechanical winding + manual check
Fewer tangles and snapped strands.
Model CA-EL-3DF-PPB0417
ELEGOO's code for this black 1kg spool.
No temperature range
Start from a PLA+ preset.
Where black PLA+ earns its place
For brackets and clips, PLA+ gives some bend before failure, which is what keeps a snap-fit from cracking on first use. Black also hides layer lines and scuffs on parts that get handled. ELEGOO still pitches a glossy surface, so the parts look tidy on display too.
Printing ELEGOO PLA+ black
ELEGOO stresses the low printing temperature, so a standard PLA+ preset on your printer is the place to start. For functional parts, more walls usually add more strength than more infill. Keep the spool sealed between jobs; ELEGOO ships it dry for a reason.
Before buying ELEGOO black PLA+
Checks for this spool.
Check before you buy
- Your ELEGOO PLA+ parts stay indoors, away from car-level heat
- Your printer is a Neptune, Bambu P1, Ender, Kobra or similar 1.75mm machine
- You are fine without a temperature range on the ELEGOO PLA+ page
The product at a glance
ELEGOO PLA+ 1.75mm Black Filament 1KG
Best for: Household fixes and clips
- Material Type
- PLA+
- Filament Diameter
- 1.75mm
- Net Weight
- 1KG
- Dimensional Accuracy
- +/- 0.02mm
- Surface Finish
- Glossy
- Printing Technology
- FDM
View on Amazon: ELEGOO PLA+ 1.75mm Black Filament 1KG Affiliate link
ELEGOO PLA+, black 1kg: a tougher take on PLA for clips, mounts and household fixes, 1.75mm ±0.02mm with a glossy, low-warp finish.
Pros
- Tougher than plain PLA
- Easy low-temperature printing
- Hides wear on handled parts
Cons
- No strength figures
- No temperature range listed
- Not for hot environments
Good fit if
- You print practical household parts
Skip if
- Your parts face sun or car heat
Verdict: A practical black spool for things that get used.
Specifications side by side
| Spec | ELEGOO PLA+ 1.75mm Black Filament 1KG |
|---|---|
| Material Type | PLA+ |
| Filament Diameter | 1.75mm |
| Net Weight | 1KG |
| Dimensional Accuracy | +/- 0.02mm |
| Surface Finish | Glossy |
| Printing Technology | FDM |
| Compatible Material | PLA |
| Color | Black |
| Size | 1KG |
| Weight | 2.2 pounds |
| Model | CA-EL-3DF-PPB0417 |
Frequently asked questions
Is ELEGOO PLA+ stronger than ELEGOO PLA?
ELEGOO says PLA+ has higher impact strength and toughness than its standard PLA.
What can I print with ELEGOO black PLA+?
Functional parts like clips, hooks, mounts and knobs, plus display models.
Does the ELEGOO PLA+ black spool tangle?
ELEGOO says each spool is machine wound and hand inspected to reduce tangles and breaks.
Is ELEGOO PLA+ good outdoors?
The listing makes no heat or UV claims; PETG or ASA is safer for sun and heat.
Featured in
See also
- elegoo abs like 3 0 resin 2000g review
- creality ender 3 v3 plus hotend adapter board review
- anycubic kobra 3 camera klipper DIY frame review
- elegoo pla filament review
- elegoo pla plus filament review
- ELEGOO Matte PLA Filament 1.75mm Review: Who It Fits and Who Should Skip It
- ELEGOO Rapid PETG Filament 1.75mm Review (2026): A Spec-Based Look
- ELEGOO 1.75mm Black PETG Filament Review: Who It Fits and Who Should Skip It
- fousae 5 in 1 soft black treadmill review
- black decker 12 1 cu ft top review
