ELEGOO Mars 5 Ultra 7-Inch 9K Mono LCD Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
When a Mars 5 Ultra screen cracks, shows dead lines or reaches the end of its life, this is ELEGOO's matching replacement: a 7-inch 9K mono LCD at 8520 × 4320 pixels, giving an 18μm XY resolution. It carries a 9H tempered glass protector and a rated lifespan of up to 2000 hours. Since the resolution matches the printer's original spec, print detail stays where it was rather than improving. The listing names the Mars 5 Ultra only. Model number EL-3D-329. This look at it is built from ELEGOO's published specs.
What stands out
- 8520 × 4320, 18μm XY
- 9H tempered glass protector
- Rated up to 2000 hours
Who it fits
Good fit for
Mars 5 Ultra owners with a cracked, flickering or worn-out screen.
Who should skip it
Owners of the Mars 4, Mars 4 Ultra or plain Mars 5, which use different screens; also anyone hoping for a resolution upgrade.
Verdict: The like-for-like screen for a Mars 5 Ultra repair.
Mars 5 Ultra screen specs
7-inch mono LCD
Mars 5 Ultra size.
8520 × 4320 (9K)
Same as the printer's spec.
18μm XY
Detail level stays the same.
9H tempered glass
Resists scratches.
Up to 2000 hours
Rated lifespan.
Model EL-3D-329
For matching the part.
A screen with its own glass guard
The tempered glass layer takes the scrapes from a dropped tool or a resin cure on the screen, which are the usual causes of early failure. Keep a screen protector film on top as well if your printer had one. Mono LCDs cure each layer faster than older color screens, but this part only restores the Mars 5 Ultra to its original speed and detail.
Fitting a new Mars 5 Ultra LCD
Unplug the printer, remove the vat, release the old screen's ribbon cable and seat the new one, then run the printer's exposure test to confirm every pixel lights. Relevel the build plate afterwards. Choose this screen if the display is the faulty part; check the cable and mainboard first if the image is missing completely.
Before you order
Checks for the Mars 5 Ultra 9K LCD.
Check before you buy
- Your printer is the Mars 5 Ultra
- Symptoms point to the screen, not the cable
- You are fine removing the Mars 5 Ultra screen frame
- You will relevel after the swap
The product at a glance
ELEGOO 7" 9K Mono LCD for Mars 5 Ultra
Best for: Mars 5 Ultra screen repair
- Screen Resolution
- 8520 × 4320
- Printing Technology
- Resin
- Dimensions
- 7.01 × 0.43 × 7.8 inches
- Weight
- 7.05 ounces
View on Amazon: ELEGOO 7" 9K Mono LCD for Mars 5 Ultra Affiliate link
ELEGOO 7-inch 9K mono screen for the Mars 5 Ultra: 8520 × 4320, 18μm XY, 9H glass, up to 2000 hours.
Pros
- Exact Mars 5 Ultra match
- Tempered glass cover
- Model number listed
Cons
- Mars 5 Ultra only
- No detail gain over stock
Good fit if
- Your Mars 5 Ultra screen failed
- You want an OEM part
Skip if
- You own a different Mars model
Verdict: The OEM screen fix for the Mars 5 Ultra.
Specifications side by side
| Spec | ELEGOO 7" 9K Mono LCD for Mars 5 Ultra |
|---|---|
| Screen Resolution | 8520 × 4320 |
| Printing Technology | Resin |
| Dimensions | 7.01 × 0.43 × 7.8 inches |
| Weight | 7.05 ounces |
| Size | Mars 5 Ultra LCD |
| Model | EL-3D-329 |
Frequently asked questions
Does the 9K LCD fit the Mars 4 Ultra?
No. ELEGOO lists it for the Mars 5 Ultra.
What resolution is the Mars 5 Ultra replacement screen?
8520 × 4320 with an 18μm XY resolution.
How long does the ELEGOO 9K screen last?
ELEGOO rates it at up to 2000 hours.
Is the Mars 5 Ultra LCD glass protected?
Yes, it has a 9H tempered glass protector.
Will a new 9K screen improve print detail?
No, it matches the printer's original resolution.
See also
- elegoo saturn 4 12k LCD screen review
- elegoo mars 4 dlp build plate review
- elegoo vented resin printer enclosure review
- elegoo 5pcs pfa film saturn review
- elegoo abs like 3 0 pro clear green resin review
- ELEGOO Metal Resin Tank for Saturn 2 and 3 Review: Specs, Pros and Cons
- ELEGOO Saturn PFA Release Film 2.0 3-Pack Review: Who It Fits and Who Should Skip It
- ELEGOO 3D Printer Adhesive Glue 2-Pack Review (2026): A Spec-Based Look
- goshyda 7 inch tft LCD review
- elegoo mars 4 ultra 9k review
