ELEGOO Mars 4 DLP Build Plate Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The Mars 4 DLP uses a projector instead of an LCD, and its platform is its own size: 140 × 84mm. This ELEGOO spare matches it, with an oxidized sandblasted aluminum face for grip and a large non-slip hex socket screw that sets the level and holds it while printing. An Allen wrench is included. It suits Mars 4 DLP owners with a scratched or bent plate, or anyone who wants a second platform so prints can cure on one while the next job starts. It does not fit the LCD Mars 4 models. We based this on ELEGOO's listing and stated dimensions.
What stands out
- 140 × 84mm, Mars 4 DLP size
- Sandblasted, oxidized surface
- Large non-slip leveling screw
Who it fits
Good fit for
Mars 4 DLP owners replacing a worn platform or adding a spare.
Who should skip it
Owners of the Mars 4 LCD, Mars 4 Ultra or Mars 5, whose platforms are a different size.
Verdict: A simple, correctly sized spare for the projector-based Mars 4.
Mars 4 DLP platform specs
140 × 84mm
Platform size, per the title.
Aluminum alloy
Flat and rigid.
Sandblasted, oxidized
Grip for the first layers.
Hex socket leveling screw
Large, non-slip.
Allen wrench
In the box.
Mars 4 DLP only
Not the LCD Mars 4.
Sandblasted face, one leveling screw
Sandblasting gives a matte, fine-grained finish that resin grips well without the deeper pattern of a laser-carved plate. A single large hex socket screw clamps the plate's leveling joint, which is easier to tighten firmly than small thumb screws.
Setting up the Mars 4 DLP plate
Loosen the hex screw, lower the platform onto the projection window as the manual describes, and tighten it while pressing the plate flat. Scrape parts off with a plastic tool to keep the sandblasted finish even. Pick this plate for the DLP model; Mars 4 LCD owners need ELEGOO's LCD-model platform.
Before you order
Checks for the Mars 4 DLP build plate.
Check before you buy
- Your printer is the Mars 4 DLP
- You want a rigid, sandblasted plate
- You have the manual's leveling steps
- You use a plastic scraper
The product at a glance
ELEGOO Mars 4 Build Plate
Best for: Mars 4 DLP owners
- Primary Material
- aluminum alloy
- Dimensions
- 140 × 84mm
- Build Surface Type
- oxidized sandblasted
- Printing Technology
- DLP
View on Amazon: ELEGOO Mars 4 Build Plate Affiliate link
ELEGOO 140 × 84mm sandblasted aluminum platform for the Mars 4 DLP, single hex leveling screw, wrench included.
Pros
- Correct DLP size
- Grippy sandblasted face
- Firm hex screw clamp
Cons
- Mars 4 DLP only
- Small 140 × 84mm area
Good fit if
- You print on a Mars 4 DLP
- You want a spare platform
Skip if
- Your Mars 4 is the LCD version
Verdict: The right-size spare for the DLP Mars 4.
Specifications side by side
| Spec | ELEGOO Mars 4 Build Plate |
|---|---|
| Primary Material | aluminum alloy |
| Dimensions | 140 × 84mm |
| Build Surface Type | oxidized sandblasted |
| Printing Technology | DLP |
| Size | Mars 4 DLP Build Plate |
| Model | 3d-printer-accessories |
Frequently asked questions
Does the ELEGOO DLP plate fit the Mars 4 LCD?
No, it is sized for the Mars 4 DLP.
How large is the Mars 4 DLP platform?
140 × 84mm, per the title.
What surface does the Mars 4 DLP plate have?
Oxidized, sandblasted aluminum.
How is the Mars 4 DLP platform leveled?
With one large non-slip hex socket screw.
Does the Mars 4 DLP plate include tools?
Yes, an Allen wrench.
Featured in
See also
- elegoo vented resin printer enclosure review
- elegoo marsmate air purifier review
- elegoo mars mate air purifier review
- elegoo 5pcs pfa film saturn review
- elegoo abs like 3 0 pro clear green resin review
- ELEGOO Metal Resin Tank for Saturn 2 and 3 Review: Specs, Pros and Cons
- ELEGOO Saturn PFA Release Film 2.0 3-Pack Review: Who It Fits and Who Should Skip It
- ELEGOO 3D Printer Adhesive Glue 2-Pack Review (2026): A Spec-Based Look
- elegoo mars 5 ultra 3d printer review
- lifepro turbo 3d vibration plate review
