Dynta PLA Filament 6-Color 250g Set (1.75mm) Review
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Dynta's PLA set packs six 250g spools of 1.75mm PLA, 1.5kg in total, in black, white, red, green, blue and purple. It is a starter or sampler box: you get the six basic colors without buying six full 1kg rolls, which suits beginners, classrooms, calibration prints and multi-part models that need a few accent colors. Dynta gives the settings plainly, 190-230°C at the nozzle and 45-60°C on the bed, with ±0.02mm diameter tolerance, and each spool is vacuum sealed with desiccant. The spools have a 53mm inner bore; Dynta names Bambu Lab A1, A1 mini, P1P, P1S and X1C, Creality Ender-3 and K1 series, Prusa MK3S+, MK4 and MINI+, and FLASHFORGE Adventurer 5M models, and warns that spool axles thicker than 53mm may not fit. Dynta also advises using an opened spool within three months. Per kilo, six small spools cost more than one full roll, so this is about color range rather than price. Everything here is drawn from Dynta's listing and spec fields; we did not print the set.
What stands out
- PLA, 6 x 250g (1.5kg)
- Black, white, red, green, blue, purple
- 1.75mm ±0.02mm
- 190-230°C nozzle / 45-60°C bed
- 53mm spool bore
Who it fits
Good fit for
Beginners, teachers and hobbyists who want six basic colors for small prints, accents and calibration without full-size rolls.
Who should skip it
Anyone printing large single-color parts, or with a spool axle wider than 53mm.
Verdict: A practical six-color PLA starter set with stated settings; it costs more per kilo than full rolls.
Dynta 6-color PLA specs
6 x 250g
1.5kg total across six colors.
53mm inner bore
Fits most standard holders; wider axles may not.
±0.02mm
Tight diameter tolerance for steady feeding.
190-230°C / 45-60°C
Nozzle and bed range from Dynta.
Use within 3 months of opening
Dynta's own advice for opened spools.
Who a six-color 250g set suits
A 250g spool covers several small models, a classroom batch of keychains, or the accent parts of a multi-color build, but not a large helmet or storage box in one color. The six colors are the basic set most beginners reach for: black and white for structural and neutral parts, red, green, blue and purple for details and kids' projects. For one color you use constantly, a full roll will be cheaper per kilo.
Printing and storing the Dynta spools
Start around the middle of the 190-230°C range and tune from there; Dynta does not give a speed. Since Dynta recommends using an opened spool within three months, keep spare colors sealed until needed, and put opened ones in a bag or box with desiccant. Small spools also run out sooner than expected, so check the slicer's weight estimate before a longer print.
Before buying the Dynta six-color set
Checks.
Check before you buy
- Your spool holder takes Dynta's 53mm bore
- You want six Dynta colors for small prints and accents
- You can use opened Dynta spools within three months
- You accept a higher cost per kilo for the color range
The product at a glance
Dynta 1.75mm PLA 250g 6-Pack
Best for: Beginners and classrooms
- Material Type
- PLA
- Filament Diameter
- 1.75mm
- Net Weight
- 1.5KG
- Dimensional Accuracy
- ±0.02mm
- Target Audience
- Beginners
- Weight
- 3.31 pounds
View on Amazon: Dynta 1.75mm PLA 250g 6-Pack Affiliate link
Dynta PLA six-color 250g set: 1.5kg total, ±0.02mm, 190-230°C nozzle, 45-60°C bed, 53mm bore, sealed with desiccant.
Pros
- Six basic colors in one box
- Full nozzle and bed settings
- Bore size and printer fit listed
Cons
- Higher cost per kilo than full rolls
- 250g runs out on big prints
- No speed range given
Good fit if
- You want six PLA colors for small projects
Skip if
- You print big single-color parts
Verdict: A six-color PLA starter set for small prints.
Specifications side by side
| Spec | Dynta 1.75mm PLA 250g 6-Pack |
|---|---|
| Material Type | PLA |
| Filament Diameter | 1.75mm |
| Net Weight | 1.5KG |
| Dimensional Accuracy | ±0.02mm |
| Compatible Material | PLA |
| Target Audience | Beginners |
| Size | 1.75Mm |
| Weight | 3.31 pounds |
| Color | 250gx6-black+white+red+green+blue+purple |
Frequently asked questions
How much PLA is in the Dynta six-color set?
Six 250g spools, 1.5kg in total.
Which colors come in the Dynta 250g set?
Black, white, red, green, blue and purple.
What temperatures does Dynta list for this PLA?
190-230°C at the nozzle and 45-60°C on the bed.
Will Dynta's 250g spools fit my spool holder?
They have a 53mm bore; Dynta says axles thicker than 53mm may not fit.
How long do opened Dynta spools stay usable?
Dynta advises using them within three months of opening.
Featured in
See also
- eono3d 95a tpu filament blue 1kg review
- funtoo transparent blue petg filament review
- elegoo mars 4 max build plate review
- best 3d printers under 200
- best 3d printers under 300
- Best 3D Printers Under $500 in 2026: 7 Picks Ranked by Specs
- Best 3D Printers Under $1000: 6 Spec-Based Picks
- 6 Best 3D Printers Under $1500, Compared
- acellegic 2 pack 1 gallon review
- wwzj 6 pack ceramic paring review
