FUNTOO PETG Filament (Transparent Blue, 1.75mm, 1kg) Review
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
FUNTOO's PETG in transparent blue is a 1kg spool of 1.75mm filament with ±0.02mm tolerance and stated settings: 230-250°C at the nozzle and 70-85°C on the bed. FUNTOO sells it as PETG that prints nearly as easily as PLA with more toughness, citing impact, wear and chemical resistance and weather resistance for outdoor use. The transparent blue color is what sets this spool apart: thin walls let light through with a blue tint, which suits lamp shades, LED covers, tinted enclosure windows, water-themed models and parts where you want to see inside, such as a cable box. Printed PETG is translucent rather than glass-clear, since layer lines and infill scatter light. The listing gives no speed range and no strength figures, and the spec field says 2.8 lb against the 1kg (2.2 lb) in the title, likely the boxed weight. One bullet is printed twice on the page. This review is drawn from FUNTOO's listing and spec fields, not from printing the spool.
What stands out
- PETG, transparent blue, 1kg
- 1.75mm ±0.02mm
- 230-250°C nozzle
- 70-85°C bed
- No speed range listed
Who it fits
Good fit for
Makers of tinted light covers, lamp shades, see-through boxes and outdoor parts who want a translucent blue PETG with stated settings.
Who should skip it
Anyone who needs glass-clear parts, published strength data or a speed rating for a fast printer.
Verdict: A translucent blue PETG with clear temperature settings, best where tinted light or a see-through look matters.
FUNTOO transparent blue PETG specs
Transparent blue PETG
Lets light through with a blue tint.
±0.02mm
Tight diameter tolerance.
230-250°C nozzle
Typical PETG window from FUNTOO.
70-85°C bed
Hotter bed than PLA.
2.8 lb spec weight
Title says 1kg; the spec likely includes packaging.
Where transparent blue PETG works
Translucent PETG is chosen for light: LED strip diffusers, night-light shells, lamp shades, aquarium and water-themed decorations, and enclosure windows tinted blue. The PETG base also handles outdoor and wet spots better than PLA, so garden markers, bird feeder parts and covers for outside electronics are reasonable jobs. For see-through parts, vase mode or few thick walls with little infill let more light pass than a solid print with a busy infill pattern.
Printing FUNTOO transparent blue PETG
Start near the middle of 230-250°C with the bed at 70-85°C. PETG can bond too strongly to smooth PEI, so a textured plate or a thin layer of glue as a release helps. FUNTOO gives no speed, so begin from your slicer's PETG profile. Keep the spool dry; moisture in PETG shows up as stringing and cloudy, bubbly walls, which spoils the transparent look most of all.
Before buying FUNTOO transparent blue PETG
Checks.
Check before you buy
- Your bed reaches 70-85°C for FUNTOO PETG
- You want a translucent blue tint, not glass-clear parts
- You will tune FUNTOO PETG speed yourself
- You have a release layer for PETG on smooth PEI
The product at a glance
FUNTOO 1.75mm PETG Filament 1kg
Best for: Tinted light covers
- Material Type
- PETG
- Filament Diameter
- 1.75 mm
- Net Weight
- 1KG
- Dimensional Accuracy
- ±0.02 mm
- Printing Technology
- FDM
- Features
- High Precision
View on Amazon: FUNTOO 1.75mm PETG Filament 1kg Affiliate link
FUNTOO transparent blue PETG 1kg: ±0.02mm, 230-250°C nozzle, 70-85°C bed; translucent tint for light covers and outdoor parts.
Pros
- Translucent blue for light diffusers
- Nozzle and bed settings listed
- Tight ±0.02mm tolerance
Cons
- No speed range given
- No strength figures
- Spec weight differs from title
Good fit if
- You print tinted blue covers or diffusers
Skip if
- You need glass-clear FUNTOO parts
Verdict: A translucent blue PETG for tinted light parts.
Specifications side by side
| Spec | FUNTOO 1.75mm PETG Filament 1kg |
|---|---|
| Material Type | PETG |
| Filament Diameter | 1.75 mm |
| Net Weight | 1KG |
| Dimensional Accuracy | ±0.02 mm |
| Printing Technology | FDM |
| Compatible Material | PETG |
| Features | High Precision |
| Size | 1KG |
| Finish | Transparent |
| Weight | 2.8 pounds |
| Color | Transparent Blue |
Frequently asked questions
What temperatures does FUNTOO list for its transparent blue PETG?
230-250°C at the nozzle and 70-85°C on the bed.
Will FUNTOO transparent blue PETG print clear?
Printed PETG is translucent; thin walls and vase mode let the most light through.
What tolerance does FUNTOO transparent blue PETG have?
±0.02mm on 1.75mm filament.
Is FUNTOO transparent blue PETG suitable outdoors?
FUNTOO cites weather resistance and suggests outdoor uses.
Why does the FUNTOO blue PETG spec say 2.8 lb?
The title says 1kg (2.2 lb); the spec weight likely includes packaging.
See also
- elegoo mars 4 max build plate review
- ideaformer ir3 v2 0 6mm hardened steel nozzle 5 pack review
- ideaformer bambu a1 0 6mm hardened steel nozzle 5 pack review
- best 3d printers under 200
- best 3d printers under 300
- Best 3D Printers Under $500 in 2026: 7 Picks Ranked by Specs
- Best 3D Printers Under $1000: 6 Spec-Based Picks
- 6 Best 3D Printers Under $1500, Compared
- voigtlander voigtlander nokton 75mm f 1 5 review
- viltrox 75mm f 1 2 f1 2 pro review
