ELEGOO Mars 4 Max Build Plate (204x129mm) Review
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This is ELEGOO's own replacement build platform for the Mars 4 Max resin printer, and it fits that printer only; ELEGOO sells separate plates for the Mars 4 Ultra, Mars 4 DLP and Saturn models. The plate face is 204×129mm, made of aluminum alloy with an oxidized black, sandblasted and laser-carved surface, which ELEGOO says is double-sided treated to improve model adhesion while still letting prints come off. Leveling uses a large non-slip hex socket screw that ELEGOO says holds its level over long runs, and an Allen wrench is included for the screws. Buy it if your current Mars 4 Max plate is scratched, bent or has lost its texture so prints keep dropping into the vat, or as a second plate so one can be washed while the other prints. The listing gives no weight rating, flatness tolerance or surface roughness figure. Everything below is based on ELEGOO's listing and spec fields; we have not used the plate.
What stands out
- Fits ELEGOO Mars 4 Max only
- 204×129mm plate face
- Aluminum alloy, laser-carved sandblasted surface
- Large hex socket leveling screw
- Allen wrench included
Who it fits
Good fit for
Mars 4 Max owners whose plate is worn or damaged, or who want a spare plate to swap in while cleaning the first.
Who should skip it
Owners of any other Mars or Saturn model, and anyone whose adhesion problems come from exposure settings rather than the plate.
Verdict: The straightforward OEM spare for the Mars 4 Max; worth it when the old plate's surface or flatness is the problem.
ELEGOO Mars 4 Max plate specs
204×129mm
Plate face size for the Mars 4 Max.
Laser-carved, sandblasted
Textured face to hold the first layers.
Aluminum alloy
Rigid and does not warp, per ELEGOO.
Hex socket screw
Large screw for leveling and locking.
Allen wrench
Included for the leveling screws.
What the ELEGOO Mars 4 Max plate changes
Resin prints hang upside down from the plate, so the first layers depend on its texture and flatness. A plate that has been scraped for months often loses the sandblasted grip in the middle, and prints start to detach and fall into the vat. A fresh laser-carved face restores that grip. A second plate is also practical: you can pull one with finished parts for washing and curing while the other is already leveled and printing.
Fitting and leveling the ELEGOO Mars 4 Max plate
Mount it on the Mars 4 Max arm, loosen the hex screw, home the plate onto a sheet of paper over the LCD, and tighten it with the included Allen wrench, the same routine as the stock plate. Recheck level after the first print. Scrape parts off with a plastic scraper where possible, since metal blades wear the textured surface fastest.
Before buying the ELEGOO Mars 4 Max plate
Checks.
Check before you buy
- Your printer is an ELEGOO Mars 4 Max
- Your Mars 4 Max plate has lost texture or flatness
- You want a spare Mars 4 Max plate for faster turnaround
- Your adhesion issue is not an exposure setting
The product at a glance
ELEGOO Mars 4 MAX Build Plate
Best for: Mars 4 Max owners
- Primary Material
- aluminum alloy
- Dimensions
- 204 × 129 mm
- Build Surface Type
- laser-carved
- Printing Technology
- LCD
- Color
- Black
View on Amazon: ELEGOO Mars 4 MAX Build Plate Affiliate link
ELEGOO Mars 4 Max build plate: 204×129mm aluminum, laser-carved sandblasted face, hex leveling screw, Allen wrench included.
Pros
- OEM fit for the Mars 4 Max
- Textured face for first-layer grip
- Wrench included
Cons
- Fits only one printer
- No flatness or load figures
- Does not fix exposure problems
Good fit if
- You run an ELEGOO Mars 4 Max
Skip if
- You own another Mars model
Verdict: The OEM spare plate for the Mars 4 Max.
Specifications side by side
| Spec | ELEGOO Mars 4 MAX Build Plate |
|---|---|
| Primary Material | aluminum alloy |
| Dimensions | 204 × 129 mm |
| Build Surface Type | laser-carved |
| Printing Technology | LCD |
| Color | Black |
| Size | 204*129mm |
Frequently asked questions
Which printer does this ELEGOO build plate fit?
The ELEGOO Mars 4 Max only; other Mars and Saturn models use different plates.
How big is the ELEGOO Mars 4 Max build plate?
The plate face is 204×129mm.
What surface does the ELEGOO Mars 4 Max plate have?
A sandblasted, laser-carved oxidized black aluminum face.
Does the ELEGOO Mars 4 Max plate come with tools?
Yes, an Allen wrench for the hex leveling screws.
Will a new ELEGOO plate fix failed resin prints?
Only if the old plate's texture or flatness is the cause; check exposure settings too.
See also
- ideaformer ir3 v2 0 6mm hardened steel nozzle 5 pack review
- ideaformer bambu a1 0 6mm hardened steel nozzle 5 pack review
- creality k1 series ceramic hotend kit review
- elegoo 5pcs pfa film saturn review
- elegoo abs like 3 0 pro clear green resin review
- ELEGOO Metal Resin Tank for Saturn 2 and 3 Review: Specs, Pros and Cons
- ELEGOO Saturn PFA Release Film 2.0 3-Pack Review: Who It Fits and Who Should Skip It
- ELEGOO 3D Printer Adhesive Glue 2-Pack Review (2026): A Spec-Based Look
- elegoo mars 5 ultra 3d printer review
- dewalt 20v max cordless 4 review
