As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

Creality SPARKX i7 Textured PEI Build Plate Review (2026)

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

A second build sheet lets you start the next print while the last one cools, and the SPARKX i7 takes a 265 × 300mm one. This is Creality's own spare: a spring steel sheet with frosted PEI powder coating on both sides, in a gold matte finish. Creality lists Hyper PLA, PLA, PETG, TPU and PLA-CF as suitable, and says adhesion holds against warping at both high and low bed temperatures. Prints come off by flexing the sheet. Note that this is the steel sheet only; the magnetic base stays on your printer. Our notes rely on Creality's listing.

What stands out

  • 265 × 300mm, made for the SPARKX i7
  • Textured PEI on both sides
  • Sheet only, no magnetic base

Who it fits

Good fit for

SPARKX i7 owners who want a spare or replacement sheet, or a second side to use when one wears.

Who should skip it

Owners of other printers, and anyone who needs a smooth PEI finish or a new magnetic base.

Verdict: The exact-fit spare sheet for the SPARKX i7.

SPARKX i7 PEI sheet specs

265 × 300mm

SPARKX i7 size.

Double-sided textured PEI

Frosted powder coat.

Spring steel

Flex to release.

PLA, PETG, TPU, PLA-CF

Listed materials.

Gold finish

No magnetic base.

Two textured sides

Both faces carry the same textured PEI, so you get two working surfaces from one sheet rather than a smooth and a textured option. Textured PEI hides layer lines on bottom faces and releases parts once cool. Creality says the coating resists scratches, though a spatula on carbon-fiber prints will still wear it over time; flip the sheet when one side starts losing grip.

Using it on the i7

Set the sheet on the existing magnetic base, print, then lift and bend it to free the part. Wash it with dish soap now and then to restore grip. Choose this sheet as a spare for your i7; choose a smooth or cool plate if you want glossy undersides or lower bed temperatures.

Before you order

Checks for the SPARKX i7 textured PEI sheet.

Check before you buy

  • Your printer is a SPARKX i7
  • Your magnetic base is still in place
  • Two textured i7 faces suit your prints
  • Your filaments are on Creality's list

The product at a glance

Creality SPARKX i7 265x300mm Textured PEI Plate

Best for: SPARKX i7 owners

Primary Material
Spring steel
Dimensions
265×300mm
Build Surface Type
Textured PEI
Build Plate Material
PEI, Spring Steel

View on Amazon: Creality SPARKX i7 265x300mm Textured PEI Plate Affiliate link

Creality's official 265 × 300mm double-sided textured PEI sheet for the SPARKX i7, gold, base not included.

Pros

  • Exact i7 fit
  • Two usable sides
  • Wide filament list

Cons

  • No magnetic base
  • Textured only, no smooth side

Good fit if

  • You want a spare i7 sheet
  • One side has worn

Skip if

  • You need a smooth PEI finish

Verdict: A straightforward spare for i7 owners.

Specifications side by side

Spec Creality SPARKX i7 265x300mm Textured PEI Plate
Primary Material Spring steel
Dimensions 265×300mm
Build Surface Type Textured PEI
Build Plate Material PEI, Spring Steel
Surface Finish Textured
Color gold

Frequently asked questions

Does the Creality i7 PEI sheet include a magnetic base?

No, it is the spring steel sheet only.

What size is the SPARKX i7 build plate?

265 × 300mm.

Is the SPARKX i7 PEI sheet textured on both sides?

Yes, both sides have textured PEI.

Can I print TPU on the i7 textured PEI sheet?

Creality lists TPU along with PLA, PETG and PLA-CF.

How do I get prints off the SPARKX i7 sheet?

Lift the sheet and flex it.

See also