As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

Creality 1M PTFE Bowden Tubing Review (2026): A Spec-Based Look

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

Creality's official PTFE tube is a one-metre length of white Bowden tubing with a 2.5mm inner and 4mm outer diameter, sized for 1.75mm filament. It is the cheap spare you keep for when a feed tube kinks, wears or gets cut short, and Creality names the K1, K1C, K1 SE, K1 Max, Ender-3 V3 and V3 Plus, K2, K2 Plus, K2 Pro and the CFS filament system as fits. The tube is rated to 260°C and is sold as plain PTFE, with no capricorn-style low-friction grade claimed. The page lists no fittings, cutter or couplers, so this is tube only. The facts here come from the product listing.

What stands out

  • 2.5mm ID, 4mm OD for 1.75mm
  • Rated to 260°C
  • Named for K1, K2, CFS, Ender 3 V3

Who it fits

Good fit for

Creality K1, K2, CFS and Ender 3 V3 owners who need to replace a worn or kinked feed tube, or reroute a spool holder.

Who should skip it

Anyone who needs more than a metre, fittings or a tube cutter in the box, or a tube for 2.85mm filament.

Verdict: A low-cost, correctly sized spare tube for recent Creality machines; buy fittings separately if yours are worn.

Creality 1m tube sizes

Length 1m

Enough for one feed run or a CFS link.

Inner diameter 2.5mm

Slightly looser than 2mm tubes; fine for 1.75mm.

Outer diameter 4mm

Fits standard 4mm push-fit couplers.

Heat resistance 260°C

Not meant to sit inside a hot hotend throat.

Filaments

PLA, PLA+, ABS, PETG, TPU per Creality.

Tube only

No couplers or cutter listed.

Material and sizing

The tube is extruded and sintered PTFE, white, with Creality claiming even wall shape so filament slides without catching. The 2.5mm bore leaves a little play around 1.75mm filament; that helps stiff filaments pass bends but gives soft TPU more room to buckle. The 4mm outside matches the push-fit couplers on Creality's K-series and Ender 3 V3 machines.

Fitting a new length

Cut the tube square with a sharp blade so the end seats flat in the coupler, then push it fully home before locking the clip. On a CFS or K2 path, match the old length so bends stay gentle. One metre covers a single run; buy the 2m version if you plan several cuts.

Before you buy

Checks for the Creality 1m PTFE tube.

Check before you buy

  • Your printer uses 4mm OD tubing
  • You print 1.75mm filament
  • One metre covers your run
  • Your couplers are still sound

The product at a glance

Creality 1M PTFE Bowden Tubing

Best for: Replacing a Creality feed tube

Extruder Type
Bowden Extruder
Color
White

View on Amazon: Creality 1M PTFE Bowden Tubing Affiliate link

Creality official PTFE tube: 1m, 2.5mm ID, 4mm OD, rated 260°C, for 1.75mm filament on K1, K2, CFS and Ender 3 V3 series; tube only.

Pros

  • Correct size for K-series feed paths
  • 260°C rating
  • Inexpensive spare

Cons

  • Only one metre
  • No couplers or cutter

Good fit if

  • You need a spare feed tube
  • You run K1, K2 or CFS

Skip if

  • You need fittings too

Verdict: A cheap, correctly sized spare tube.

Specifications side by side

Spec Creality 1M PTFE Bowden Tubing
Extruder Type Bowden Extruder
Color White
Size 1M

Frequently asked questions

What size is the Creality PTFE tube?

2.5mm inner diameter and 4mm outer diameter, one metre long.

Which printers does Creality list?

K1, K1C, K1 SE, K1 Max, Ender-3 V3, Ender 3 V3 Plus, K2, K2 Plus, K2 Pro and the CFS.

How hot can it get?

Creality rates it to 260°C.

Are couplers included?

The page lists only the tube.

1m or 2m tube?

Choose 1m for a single replacement; choose 2m if you need spare length for several cuts or a long CFS run.

See also