Creality Ender PLA Pro Rainbow Review: Who It Fits and Who Should Skip It
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Creality's Ender PLA Pro in Rainbow is a 1kg PLA+ spool for 1.75mm printers whose color shifts along the strand, so a single print picks up several bands of color without a multi-material setup. Creality's case for it is toughness: parts can be bent repeatedly without snapping, and the formula is said to flow evenly without clogs or bubbles. The listing names the Prusa MK3, Ender 3, Ender 3 V3 SE and KE, K1, K1 Max and K1C among compatible printers, plus 3D pens. Two gaps: the page does not say how long each color band runs or which colors are included, and it quotes tolerance as ±0.02mm in the title but ±0.03mm in the bullets. No temperatures are given. We based this on the listing text.
What stands out
- Color shifts along one spool
- PLA+ toughness: bends before it breaks
- Named fit: MK3, Ender 3 V3, K1 series
Who it fits
Good fit for
Hobby printers making vases, toys, figurines and gifts who want color variation from one spool on an Ender, K1 or MK3.
Who should skip it
Anyone who needs a predictable color at a set height, a stated color list, or one confirmed tolerance figure.
Verdict: A fun PLA+ for decorative prints; expect the color bands to fall wherever the spool puts them.
Ender PLA Pro Rainbow details
PLA+ (Ender PLA Pro)
Tougher than plain PLA, per Creality.
Rainbow color
Shifts along the strand; band length not stated.
1kg, 1.75mm
Standard spool.
Tolerance ±0.02 or ±0.03mm
Title and bullets disagree.
Plant-based PLA
Made from starch-derived raw material.
No temperatures listed
Start from a PLA+ profile.
Formula and packing
Creality describes a starch-based PLA+ with a non-clogging design and good flow. The spool is dried for a day, then vacuum packed in a PC bag with desiccant. The color field simply says Rainbow; there is no photo key or list of the hues in the strand, so the exact mix is a surprise until it prints.
Printing the rainbow spool
Large, tall prints show the color shift best; small parts may print in a single band. Use a PLA+ starting profile and a temperature tower, since Creality lists no range. Creality says a heated bed is expected. If you want repeatable colors on matching parts, print them in one job so they share the same section of strand.
Before you buy
Checks for the Rainbow Ender PLA Pro.
Check before you buy
- You like random color bands
- Your prints are tall enough to show the shift
- You can tune PLA+ temps
- Your printer has a heated bed
The product at a glance
Creality Ender PLA Pro Rainbow Filament 1kg
Best for: Decorative multi-color prints
- Material Type
- PLA+
- Filament Diameter
- 1.75 mm
- Net Weight
- 1 kg
- Dimensional Accuracy
- +/- 0.03 mm
- Color Effect
- Rainbow
- Surface Finish
- Smooth
View on Amazon: Creality Ender PLA Pro Rainbow Filament 1kg Affiliate link
Creality Ender PLA Pro Rainbow: PLA+ 1kg 1.75mm with color shifting along the strand, toughness claim, named MK3/Ender/K1 fit; tolerance listed as ±0.02 and ±0.03mm, no temps.
Pros
- Several colors from one spool
- Tougher PLA+ base
- Wide named printer fit
Cons
- Color bands not described
- Conflicting tolerance figure
Good fit if
- You print decor and toys
- You want color without AMS
Skip if
- You need a fixed color
Verdict: A playful color-shifting PLA+.
Specifications side by side
| Spec | Creality Ender PLA Pro Rainbow Filament 1kg |
|---|---|
| Material Type | PLA+ |
| Filament Diameter | 1.75 mm |
| Net Weight | 1 kg |
| Dimensional Accuracy | +/- 0.03 mm |
| Compatible Material | PLA |
| Color Effect | Rainbow |
| Surface Finish | Smooth |
| Weight | 2.2 pounds |
| Size | Ender PLA Pro-1KG |
| Color | Rainbow |
Frequently asked questions
How does the Rainbow spool change color?
The color varies along the filament length; Creality does not state the band length.
Which colors are in it?
The listing does not list them.
What tolerance does Creality state?
The title says ±0.02mm and the bullets say ±0.03mm.
Which printers are named?
MK3, Ender 3, Ender 3 V3 SE, Ender 3 V3 KE, Ender 3 V3, K1, K1 Max and K1C.
Rainbow or black Ender PLA Pro?
Choose Rainbow for decorative prints with shifting color; choose the black spool for functional parts in one steady color.
See also
- creality cfs filament system k2 review
- creality gray abs filament 1kg review
- creality ppa cf 1 75mm filament review
- creality pla plus filament review
- creality silk pla filament review
- Creality Hyper RFID PLA Filament Review: Specs, Pros and Cons
- Creality CR-ABS 1.75mm 1kg Filament Review: Who It Fits and Who Should Skip It
- Creality 1.75mm 95A TPU Filament Review: Specs, Pros and Cons
- best creality 3d printers
- easycargo 30pcs 3d printer heatsink review
