Creality Hyper PETG-CF 1.75mm Filament Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Creality Hyper PETG-CF is a gray 1kg spool of 1.75mm PETG filled with 8% carbon fiber, aimed at stiff functional parts such as frames, drone arms, tool holders and car parts. Its standout is that Creality gives real settings: nozzle 240-270°C, bed 70-90°C, and high-speed printing up to 300mm/s per the title. The spool carries an RFID tag that the Creality CFS reads to load the profile and track what is left. Creality claims heat resistance up to 100°C and resistance to solvents, oils and acids, but gives no tensile or HDT test sheet. As with any carbon-filled filament, plan on a hardened nozzle. Every figure here is quoted from Creality's product page.
What stands out
- 8% carbon fiber in PETG
- Settings listed: 240-270°C / 70-90°C
- RFID tag read by Creality CFS
Who it fits
Good fit for
Owners of K1, K2 or other high-speed printers, especially with a CFS, who want stiffer, matte PETG parts for brackets, jigs and drone frames.
Who should skip it
Printers with only a brass nozzle, and buyers who need datasheet strength figures before choosing an engineering filament.
Verdict: A well-specified carbon PETG for fast Creality machines; budget for a hardened nozzle.
Hyper PETG-CF numbers
8% carbon fiber
Adds stiffness and a matte finish to PETG.
Nozzle 240-270°C
Within reach of most all-metal hotends.
Bed 70-90°C
Typical PETG bed range.
Up to 300mm/s
Speed figure from the title.
Heat resistance to 100°C
Creality claim; no test method given.
RFID for CFS
Auto profile and remaining-length tracking.
Material and spool
Hyper PETG-CF keeps PETG's impact resistance while the carbon fiber raises stiffness and dimensional stability, Creality says, with low shrinkage for less warping. The RFID chip lets a Creality CFS recognise the material and set the printer up without manual entry. The listing gives the weight as 1kg (2.2 lb) and the color as gray.
Printing Hyper PETG-CF
Fit a hardened steel or similar wear-resistant nozzle of 0.4mm or larger, since carbon fiber wears brass. Start mid-range near 255°C with the bed around 80°C and slow the first layer. Dry the spool if you see stringing. On a CFS, load it and let the tag fill in the settings; on other printers, use the listed ranges.
Before you buy
Checks for Creality Hyper PETG-CF.
Check before you buy
- You have a hardened nozzle
- Your hotend reaches 270°C
- You want stiffness over flexibility
- A CFS makes the RFID useful
The product at a glance
Creality Hyper PETG-CF 1.75mm Filament
Best for: Stiff functional PETG parts
- Material Type
- PETG-CF
- Filament Diameter
- 1.75mm
- Net Weight
- 1 KG
- Max Print Speed
- 300mm/s
- Features
- High Speed, Carbon Fiber
- Weight
- 2.2 pounds
View on Amazon: Creality Hyper PETG-CF 1.75mm Filament Affiliate link
Creality Hyper PETG-CF gray: 8% carbon fiber, 1kg 1.75mm, nozzle 240-270°C, bed 70-90°C, up to 300mm/s, RFID for the CFS, 100°C heat resistance claim.
Pros
- Print settings listed
- RFID works with CFS
- Stiffer than plain PETG
Cons
- Needs a hardened nozzle
- No strength datasheet
Good fit if
- You print stiff functional parts
- You own a Creality CFS
Skip if
- Your printer has a brass nozzle only
Verdict: Carbon PETG with clear settings for fast printers.
Specifications side by side
| Spec | Creality Hyper PETG-CF 1.75mm Filament |
|---|---|
| Material Type | PETG-CF |
| Filament Diameter | 1.75mm |
| Net Weight | 1 KG |
| Max Print Speed | 300mm/s |
| Compatible Material | PETG |
| Features | High Speed, Carbon Fiber |
| Weight | 2.2 pounds |
| Size | PETG-CF |
| Color | Gray |
Frequently asked questions
How much carbon fiber is in Hyper PETG-CF?
8%, per Creality.
What temperatures does Creality list?
Nozzle 240-270°C and bed 70-90°C.
Does it work without a CFS?
Yes; the RFID tag is only used by the CFS, the filament prints on any 1.75mm printer that reaches the temps.
Do I need a hardened nozzle?
It is strongly advised for any carbon-filled filament; the listing does not say.
Hyper PETG-CF or PPA-CF?
Choose PETG-CF for easier printing at lower cost; choose PPA-CF for higher heat and strength on an enclosed, hotter printer.
See also
- creality ender pla pro rainbow filament review
- creality cfs filament system k2 review
- creality gray abs filament 1kg review
- creality pla plus filament review
- creality silk pla filament review
- Creality Hyper RFID PLA Filament Review: Specs, Pros and Cons
- Creality CR-ABS 1.75mm 1kg Filament Review: Who It Fits and Who Should Skip It
- Creality 1.75mm 95A TPU Filament Review: Specs, Pros and Cons
- wonitago carbon fiber kayak review
- paiseec q3 carbon fiber 28lbs review
