Creality CFS Multicolor Filament System Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The Creality CFS is a sealed four-spool box that feeds a compatible Creality printer for multi-color and multi-material jobs. This listing targets the K2, K2 Pro, K2 Plus, K2 SE, Hi and V4, where it plugs in directly; K1-series owners need the separate K1 Series CFS Upgrade Kit, and the 2025 versions of the K1, K1C, K1 Max and K1 SE are excluded outright. Each unit takes four 1kg spools, and four units can be chained for 16 colors. It reads RFID tags on Creality spools, maps filaments to the G-code, and swaps in a matching spool when one runs out. It will not feed TPU, damp BVOH or PVA, or cardboard spools that have warped. Specs here are Creality's, as listed.
What stands out
- Direct fit for K2 family, Hi and V4
- 4 spools per unit, chain 4 for 16
- Auto-relay to a matching spool
Who it fits
Good fit for
K2-series, Hi or V4 owners who want multi-color prints, dry storage and automatic spool backup in one box.
Who should skip it
K1 2025-edition owners, anyone printing TPU, and buyers who use cardboard spools or want to avoid a large add-on spend.
Verdict: A strong add-on for the K2 family; check your exact printer version and spool type before ordering.
CFS at a glance
4 x 1kg spools per unit
One box gives four colors or materials.
Up to 4 units linked
Sixteen spools in total.
RFID reading
Creality tags set type and color automatically.
Auto mapping and relay
Slicer picks spools; backup spool takes over.
Airtight with desiccant
Keeps spools dry between jobs.
About 13 lb shipping weight
Plan shelf space on top of or beside the printer.
What fits and what does not
The listing is clear on limits. Direct fit: K2, K2 Pro, K2 Plus, K2 SE, Hi and V4, plus the K2 Combo. K1, K1C, K1 SE and K1 Max need the official upgrade kit, and their 2025 releases are not supported at all. TPU, wet BVOH or PVA and warped cardboard spools are ruled out, and Creality recommends its RFID filament. Spools on paper cores are not advised.
Running jobs with the CFS
Load RFID spools and the CFS fills in type and color; for other brands, enter the details by hand in Creality Print. Sensors pause the job and alert you if feeding goes wrong. Put a matching second spool in the box for long prints so the relay can take over when the first empties. Swap desiccant on a schedule to keep the seal useful.
Before you buy
Checks for this CFS listing.
Check before you buy
- Your printer is K2, K2 Pro, K2 Plus, K2 SE, Hi or V4
- Not a K1 2025 edition
- You use plastic or RFID spools
- You do not need TPU in the box
The product at a glance
Creality CFS Multicolor Filament System
Best for: Multi-color on K2 printers
- Color Printing
- Multi-Color
- Weight
- 13 pounds
View on Amazon: Creality CFS Multicolor Filament System Affiliate link
Creality CFS for K2/K2 Pro/K2 Plus/K2 SE/Hi/V4: four 1kg spools per unit, link four for 16 colors, RFID, auto mapping and relay, airtight storage; no TPU, no K1 2025.
Pros
- Plug-in fit for the K2 family
- Auto relay on run-out
- Sealed dry storage
Cons
- No TPU or warped cardboard spools
- K1 needs an extra kit
Good fit if
- You own a K2-series printer
- You want multi-color
Skip if
- You print TPU often
Verdict: The multi-color add-on to get for a K2.
Specifications side by side
| Spec | Creality CFS Multicolor Filament System |
|---|---|
| Color Printing | Multi-Color |
| Weight | 13 pounds |
| Color | Cfs System |
Frequently asked questions
Which printers does this CFS fit directly?
K2, K2 Pro, K2 Plus, K2 SE, Hi and V4.
Can I use it on a K1?
Only with the K1 Series CFS Upgrade Kit, and not on 2025 K1, K1C, K1 Max or K1 SE models.
How many colors can I print?
Four per unit, up to 16 with four linked units.
Does it work with non-Creality filament?
Yes, but you enter the type and color manually; cardboard spools are not recommended.
CFS or a single dry box?
Choose the CFS for multi-color jobs and auto spool backup on a K2; choose a plain dry box if you only print one color.
See also
- creality gray abs filament 1kg review
- creality ppa cf 1 75mm filament review
- creality hyper pla white 2kg twin pack review
- creality pla plus filament review
- creality silk pla filament review
- Creality Hyper RFID PLA Filament Review: Specs, Pros and Cons
- Creality CR-ABS 1.75mm 1kg Filament Review: Who It Fits and Who Should Skip It
- Creality 1.75mm 95A TPU Filament Review: Specs, Pros and Cons
- creality sparkx multicolor 3d printer review
- unxuey 50pcs 3d printer heatsink review
