As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

Creality Gray ABS Filament 1.75mm (1kg) Review: Specs, Pros and Cons

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

Creality's gray ABS is a 1kg spool of 1.75mm filament for heat-tolerant, impact-resistant parts such as printer mods, car interior clips and enclosures for electronics. It is one of the few Creality ABS listings that prints settings: nozzle 220-260°C and bed 90-110°C, with Creality advising a fully enclosed printer or an open printer inside an enclosure. The spool has a larger inner diameter for smoother feeding, and winding is checked by hand to limit tangles. Tolerance is stated as ±0.02mm in the title but ±0.03mm in the bullets. Creality calls it odorless and non-toxic; ABS still gives off fumes when printed, so ventilate. Our notes come straight from the listing.

What stands out

  • Settings listed: 220-260°C / 90-110°C
  • Enclosure advice given up front
  • Wide spool core for smoother feed

Who it fits

Good fit for

Owners of enclosed printers, or open printers with a tent, who need gray parts that handle heat and knocks better than PLA.

Who should skip it

Anyone with an open printer and no enclosure, a room without ventilation, or a bed that tops out below 90°C.

Verdict: A clearly specified gray ABS for enclosed printers; skip it if you cannot keep the chamber warm.

Creality gray ABS: what the specs mean

Nozzle 220-260°C

Most all-metal and many PTFE-lined hotends cover the low end.

Bed 90-110°C

Needs a bed that reaches at least 90°C.

Enclosure recommended

Cuts warping and layer splits.

Tolerance ±0.02 or ±0.03mm

Title and bullets disagree.

1kg, 1.75mm, gray

Neutral color for functional parts.

Larger spool hub

Eases feeding from a holder.

Spool and winding

Creality machine-winds the ABS and checks each spool by hand to keep the line tidy, which helps avoid snaps mid-print. The spool hub is wider than usual, which lowers drag on the feed. Diameter is controlled by a CCD gauge during extrusion. Support is offered with a 24-hour reply promise.

Printing gray ABS

Close the enclosure and let the chamber warm before starting. Begin around 240°C and a 100°C bed, turn the part cooling fan low, and use a brim on large flat parts. For grip, a textured PEI plate or a thin glue layer works on the gray ABS first layer. Ventilate the room or use a filtered enclosure, since ABS releases styrene fumes even when the page says odorless.

Before you buy

Checks for Creality gray ABS.

Check before you buy

  • You have an enclosure or enclosed printer
  • Your bed reaches 100°C
  • The room is ventilated
  • Gray suits your parts

The product at a glance

Creality 1.75mm ABS Filament (1kg)

Best for: Heat-tolerant gray parts

Material Type
ABS
Filament Diameter
1.75mm
Net Weight
1KG
Dimensional Accuracy
+/-0.02mm
Printing Technology
FDM
Resin Type
Tough

View on Amazon: Creality 1.75mm ABS Filament (1kg) Affiliate link

Creality gray ABS 1kg 1.75mm: nozzle 220-260°C, bed 90-110°C, enclosure recommended, wide spool hub, tolerance ±0.02mm (title) vs ±0.03mm (bullets).

Pros

  • Temperatures and bed range listed
  • Wide spool hub
  • Neutral gray

Cons

  • Needs an enclosure
  • Tolerance stated two ways

Good fit if

  • You own an enclosed printer
  • You need heat-tolerant parts

Skip if

  • Your printer is open-frame

Verdict: Good ABS for enclosed printers.

Specifications side by side

Spec Creality 1.75mm ABS Filament (1kg)
Material Type ABS
Filament Diameter 1.75mm
Net Weight 1KG
Dimensional Accuracy +/-0.02mm
Printing Technology FDM
Compatible Material ABS
Size 1.75Mm
Resin Type Tough
Weight 2 pounds
Color Gray*1kg

Frequently asked questions

What temperatures does Creality list for this ABS?

Nozzle 220-260°C, bed 90-110°C.

Do I need an enclosure?

Creality recommends a fully enclosed printer or an open printer with an enclosure.

What tolerance is stated?

±0.02mm in the title, ±0.03mm in the bullets.

Is it really odorless?

Creality says so, but ABS printing still releases fumes; ventilate.

Creality ABS or PETG?

Choose ABS for higher heat resistance in an enclosed printer; choose PETG for open printers and easier printing.

See also