As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

Creality Hi Extruder Kit Review (2026)

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

Creality's Hi extruder kit is the original feeder for the Creality Hi and Hi Combo printers. It uses a dual-gear drive with a 6.25:1 reduction for 80N of extrusion force, hardened gears that Creality says stand up to repeated retraction and abrasive filaments, and a filament runout sensor built into the body, which pauses a print on an empty spool or a jam. The whole unit measures 48 × 38 × 35mm. Creality lists Hyper PLA, Hyper ABS, Hyper PLA-CF and Hyper RFID among compatible filaments, plus some standard ones. These details come from Creality's listing (model AMUS-CU-3D-AC-Hi-Extruder).

What stands out

  • 80N force, 6.25:1 reduction
  • Dual hardened gears
  • Built-in runout sensor

Who it fits

Good fit for

Creality Hi or Hi Combo owners with worn gears, slipping feed or a failed runout sensor.

Who should skip it

Owners of other Creality models, and anyone looking for a generic extruder for a different printer.

Verdict: The like-for-like feeder repair for the Creality Hi, sensor included.

Creality Hi extruder specs

80N extrusion force

Strong, steady feeding.

6.25:1 gear reduction

Fine control on retraction.

Dual hardened gears

For abrasive filament.

Runout sensor built in

Pauses on empty or jam.

48 × 38 × 35mm

Compact body.

Hi / Hi Combo fit

Per Creality.

Sensor and drive in one block

On the Hi, the runout sensor lives inside the extruder, so a single part fixes both feeding and detection faults. The 6.25:1 reduction gives the motor fine control over small retraction moves, which is what limits stringing. Hardened gears matter for PLA-CF and similar fills, which wear soft gears quickly and cause slipping.

Replacing the Hi extruder

Unload the filament, unplug the extruder and sensor connectors, swap the unit and reload. Run a short calibration print to confirm the feed rate. Pick this kit if the gears grind, filament slips or the sensor misreads; if the problem is a clog at the nozzle, the hot end is the part to look at.

Before you order

Checks for the Creality Hi extruder kit.

Check before you buy

  • Your printer is a Creality Hi or Hi Combo
  • Feed slips, gears grind or the sensor misfires
  • You print Hyper series or carbon fiber filament
  • You can unplug and refit two connectors

The product at a glance

Creality Hi Dual-Gear Extruder Kit

Best for: Creality Hi and Hi Combo

Dimensions
48×38×35mm
Surface Finish
Smooth

View on Amazon: Creality Hi Dual-Gear Extruder Kit Affiliate link

Original Creality Hi extruder: dual hardened gears, 6.25:1, 80N, built-in runout sensor, 48 × 38 × 35mm.

Pros

  • Fixes feed and sensor faults at once
  • Handles abrasive filament
  • Exact Hi fit

Cons

  • Hi and Hi Combo only
  • No stated torque or motor spec

Good fit if

  • Your Hi slips or grinds filament
  • The runout sensor fails

Skip if

  • Your Creality is a different model

Verdict: The factory feeder fix for the Creality Hi.

Specifications side by side

Spec Creality Hi Dual-Gear Extruder Kit
Dimensions 48×38×35mm
Surface Finish Smooth
Model AMUS-CU-3D-AC-Hi-Extruder

Frequently asked questions

Does the Hi extruder fit the Creality K1 or K2?

Creality lists the Hi and Hi Combo only.

Is a runout sensor included with the Hi extruder?

Yes, it is built into the extruder.

How strong is the Creality Hi extruder?

80N of extrusion force from a 6.25:1 reduction.

Can the Hi extruder feed carbon fiber filament?

Creality lists Hyper PLA-CF and says the gears handle abrasive filaments.

How big is the Creality Hi extruder?

48 × 38 × 35mm.

See also