Creality Ender 3 Dual Z-Axis Upgrade Kit Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
A stock Ender 3 drives the X gantry from one side only, so the far end can sag or lag and the gantry drifts out of square. Creality's official dual Z kit adds a second stepper motor and lead screw on the other side, so both ends rise and fall in sync. Creality says this cuts layer ripple from Z wobble and means less frequent bed and gantry leveling. A metal power supply holder is part of the kit. The listed fit is the Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 Neo and Ender 3 V2 Neo. The package measures 15.6 × 3.94 × 2.56in and weighs 2.01 lb. Specs and fit come from the Creality listing.
What stands out
- Second stepper and lead screw
- Both gantry ends move together
- Fits five Ender 3 models
Who it fits
Good fit for
Ender 3, Pro, V2, Neo or V2 Neo owners who keep re-squaring the X gantry or see Z banding from one-sided lift.
Who should skip it
Owners of Ender 3 V3 series printers, and anyone whose single-screw Ender already prints clean layers.
Verdict: The official way to put both sides of an Ender 3 gantry under motor control.
Ender 3 dual Z kit specs
Second Z stepper
Drives the right side.
Second lead screw
Matches the stock screw.
Metal PSU holder
Included in the box.
Ender 3 / Pro / V2 / Neo / V2 Neo
Listed fit.
2.01 lb
Shipping weight.
Motor-driven vs belt-linked dual Z
There are two common ways to add a second Z drive: a belt that links one motor to both screws, or a second motor on its own screw. Creality's kit is the second type, so each side has its own stepper. That keeps the stock motor layout and needs no belt tension, but the two motors can fall out of step if the gantry is bumped while the printer is off, so square the gantry against the frame before each long print run.
Living with the upgrade
Once fitted, both screws lift the gantry evenly, which helps on tall prints where a one-sided Ender tends to show banding. Choose this kit if your Ender 3 gantry keeps tilting; skip it if banding comes from a bent lead screw or loose eccentric nuts, which a second motor will not fix.
Before you order
Checks for the Creality Ender 3 dual Z kit.
Check before you buy
- Your printer is an Ender 3, 3 Pro, 3 V2, 3 Neo or 3 V2 Neo
- Your mainboard can drive a second Z motor
- You can square the X gantry against the frame
- Banding is not caused by worn wheels or a bent screw
The product at a glance
Creality Ender 3 Dual Z-Axis Upgrade Kit
Best for: Ender 3 gantry sag
- Color
- Black
- Dimensions
- 3.94 × 15.6 × 2.56 inches
- Weight
- 2.01 pounds
View on Amazon: Creality Ender 3 Dual Z-Axis Upgrade Kit Affiliate link
Official Creality dual Z upgrade for the Ender 3 family: second stepper, second lead screw and a metal PSU holder.
Pros
- Both gantry ends lifted
- Fits five Ender 3 models
- No belt to tension
Cons
- Motors can drift apart if bumped
- Will not fix worn wheels
Good fit if
- Your X gantry keeps tilting
- You print tall parts
Skip if
- You own an Ender 3 V3 model
Verdict: A sound mechanical upgrade for older Ender 3 frames.
Specifications side by side
| Spec | Creality Ender 3 Dual Z-Axis Upgrade Kit |
|---|---|
| Color | Black |
| Dimensions | 3.94 × 15.6 × 2.56 inches |
| Weight | 2.01 pounds |
| Size | Z-axis |
| Model | CREALITYENDER3DUALZ |
Frequently asked questions
Does the Creality dual Z kit fit the Ender 3 V2 Neo?
Yes, Creality lists the Ender 3 V2 Neo with the Ender 3, 3 Pro, 3 V2 and 3 Neo.
Does the Ender 3 dual Z kit include a motor?
Yes, a second stepper motor and lead screw come with it.
Why is a power supply holder in the Ender 3 dual Z kit?
Creality includes a metal holder in the kit; the page does not say why.
Will the Creality dual Z kit reduce bed leveling?
Creality says syncing both gantry ends makes leveling easier and less frequent.
Is the Ender 3 dual Z kit belt-driven?
No, each side gets its own stepper and lead screw.
Featured in
See also
- creality cfs k1 series upgrade kit review
- creality k1 AI camera 1080p review
- creality ender 3 silent motherboard review
- creality cr 10 se ceramic hotend kit review
- creality 310x320mm textured pei build plate review
- Creality K1 235x235mm Smooth PEI Build Plate Review: Who It Fits and Who Should Skip It
- Creality Ender 3 All-Metal Extruder Review (2026): A Spec-Based Look
- Creality 2M PTFE Bowden Tubing Review: Specs, Pros and Cons
- creality ender 5 max large 3d printer review
- easycargo 30pcs 3d printer heatsink review
