As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

Creality Aluminum Leveling Nuts and Springs Review (2026)

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

Plastic leveling wheels and soft stock springs are the usual reason a manually leveled Creality bed drifts out of true after a few prints. This official Creality set replaces both: four aluminum hand-twist nuts and four yellow die springs sized 8 × 20mm. Creality says the metal nuts grip tighter than plastic and turn with more torque, which makes small adjustments easier to hold. The bullets name the Ender 3, 3 Pro, 3 V2 and 3 Max, the Ender 5, 5 Plus and 5 Pro, most CR-10 models, the CR-X and CR-20; the title also adds Ender 3 Neo, V2 Neo, S1 and S1 Pro. The nuts are listed as 60mm without saying which dimension that is. Everything below is taken from Creality's product page.

What stands out

  • Four aluminum hand-twist nuts
  • Four 8 × 20mm yellow die springs
  • Fits Ender 3, Ender 5 and CR-10 families

Who it fits

Good fit for

Owners of manually leveled Ender 3, Ender 5 or CR-10 printers whose bed keeps losing its level or whose plastic wheels have cracked.

Who should skip it

Owners of printers with auto leveling and fixed bed mounts, or anyone who already runs silicone spacers and is happy with them.

Verdict: A cheap, low-risk fix for beds that will not stay level.

Creality leveling nut set specs

4 aluminum nuts

Hand-twist, listed as 60mm.

4 yellow die springs

8 × 20mm, stiffer than stock.

Ender 3 / 5 / CR-10 fit

Plus CR-X and CR-20.

Red and yellow

Nut and spring colors.

Tool-free install

Swap on the existing bolts.

Why stiffer springs hold a level

Bed springs carry the plate against the nuts. Soft springs compress a little each time the nozzle drags or the bed heats, and the corners creep out of adjustment. A yellow die spring needs more force to compress, so the plate sits more firmly. Metal nuts add to that: they do not flex or crack, and Creality says they turn with more torque, so a quarter turn stays where you left it.

Fitting the set

Remove the old wheels and springs one corner at a time, fit the new spring and nut on the same bolt, then level the bed from scratch, since the stiffer springs change the bed height. Choose this set if your bed loses its level between prints; skip it if an auto leveling probe already compensates and the bed rarely moves.

Before you order

Checks for the Creality aluminum leveling nut and spring set.

Check before you buy

  • Your Creality bed uses four leveling screws with springs
  • Your printer is an Ender 3, Ender 5 or CR-10 variant
  • You will relevel the bed after fitting the yellow springs
  • You want metal nuts rather than plastic wheels

The product at a glance

Creality 60mm Aluminum Leveling Nuts and Springs Set

Best for: Manual-level Ender 3 and CR-10 beds

Primary Material
Aluminum

View on Amazon: Creality 60mm Aluminum Leveling Nuts and Springs Set Affiliate link

Creality's official bed leveling set: four aluminum hand-twist nuts and four 8 × 20mm yellow die springs for Ender 3, Ender 5 and CR-10 beds.

Pros

  • Metal nuts will not crack
  • Stiffer springs hold the level
  • Fits many Creality beds

Cons

  • 60mm size not explained
  • Bed needs a full relevel after fitting

Good fit if

  • Your bed drifts out of level
  • A plastic leveling wheel broke

Skip if

  • Your printer has a fixed, auto-leveled bed

Verdict: A small part that cuts down on bed releveling.

Specifications side by side

Spec Creality 60mm Aluminum Leveling Nuts and Springs Set
Primary Material Aluminum
Color Red, Yellow

Frequently asked questions

What comes in the Creality leveling nut set?

Four aluminum hand-twist nuts and four yellow die springs (8 × 20mm).

Do the Creality aluminum nuts fit the Ender 3 V2?

Yes, the Ender 3 V2 is in Creality's compatibility list.

Why are the Creality yellow springs better than stock ones?

They are die springs that resist compression, so the bed holds its level longer.

Are tools needed to fit the Creality leveling nuts?

No, the old nuts and springs come off by hand and the new ones go on the same bolts.

What does 60mm mean on the Creality nut listing?

The page lists the nuts as 60mm but does not say which dimension that is.

See also