As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

Creality Ender PLA Pro 1.75mm Review: Who It Fits and Who Should Skip It

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

Creality's Ender PLA Pro in black is a PLA+ spool, 1kg of 1.75mm filament held to ±0.02mm, pitched at Ender owners who want parts that crack less than plain PLA. Creality's headline claim is toughness five times that of regular PLA, along with good impact strength and rigidity; no test method is given for that figure. The spool is dried before packing and sealed with desiccant, and the bullets name Ender 3, Ender 3 V2, Ender 3 S1, Ender 5 S1, CR-6 and CR-10 as fits, plus 3D pens. The weak spot is settings: the page lists no nozzle or bed temperature and no speed. All details below are taken from Creality's listing.

What stands out

  • ±0.02mm diameter tolerance
  • 5x toughness claim over plain PLA
  • Black, 1kg, sealed with desiccant

Who it fits

Good fit for

Ender and CR-series owners printing brackets, clips, enclosures and everyday black parts that should flex a little before they snap.

Who should skip it

High-speed printer owners who need a rated max speed, and anyone who wants the toughness claim backed by numbers.

Verdict: A sensible black PLA+ for Ender-class printers, with tight tolerance but no settings on the page.

Ender PLA Pro black, spec by spec

PLA+ (Ender PLA Pro)

Toughened PLA for functional parts.

±0.02mm on 1.75mm

Measured by CCD during extrusion, per Creality.

1kg net (2.2 lb)

Standard spool size.

5x tougher than PLA

Creality's claim; no test standard named.

Pre-dried, vacuum packed

Desiccant in a clear bag.

No print temperatures

Start from a PLA+ profile in your slicer.

Formula and packing

Creality calls this its Ender R&D Lab formula, a PLA+ blend aimed at impact strength without losing stiffness. Winding is done to avoid tangles. Before packing, the spool spends a full day drying and then goes into a clear vacuum bag with desiccant. Creality offers support with a 24-hour response promise.

Printing black Ender PLA Pro

Most PLA+ runs a little hotter than plain PLA, so begin around the upper end of a PLA profile and run a temperature tower, since Creality gives no range. Black hides layer lines well, which suits enclosures and printer parts. On Ender 3 class machines the listed fit is direct, and the page also names 3D pens.

Before you buy

Checks for the black Ender PLA Pro spool.

Check before you buy

  • You want PLA+ toughness, not plain PLA
  • Your printer takes 1.75mm
  • You can dial in temps without a listed range
  • Black suits your parts

The product at a glance

Creality Ender PLA Pro 1.75mm Filament

Best for: Tough everyday black parts

Material Type
PLA+
Filament Diameter
1.75mm
Net Weight
1kg
Dimensional Accuracy
±0.02mm
Printing Technology
FDM
Dimensions
7.9 × 7.9 × 2.7 inches

View on Amazon: Creality Ender PLA Pro 1.75mm Filament Affiliate link

Creality Ender PLA Pro black: PLA+ 1kg 1.75mm at ±0.02mm, 5x toughness claim, dried and vacuum packed; fits Ender and CR printers; no temps listed.

Pros

  • Tight ±0.02mm tolerance
  • Tougher than plain PLA
  • Named Ender fit list

Cons

  • No print temperatures
  • Toughness claim untested

Good fit if

  • You run an Ender or CR printer
  • You print functional black parts

Skip if

  • You need a high-speed rating

Verdict: Solid black PLA+ for Ender owners.

Specifications side by side

Spec Creality Ender PLA Pro 1.75mm Filament
Material Type PLA+
Filament Diameter 1.75mm
Net Weight 1kg
Dimensional Accuracy ±0.02mm
Printing Technology FDM
Compatible Material PLA
Size 1.75Mm
Dimensions 7.9 × 7.9 × 2.7 inches
Weight 2.2 pounds
Color Pla+ Plus Pro - Black
Model Creality Ender PLA Pro (PLA+ PLA Plus)

Frequently asked questions

Is Ender PLA Pro the same as PLA+?

Yes. Creality labels it Ender PLA Pro (PLA+, PLA Plus).

What tolerance does it hold?

Creality states ±0.02mm for this black PLA+ spool.

Which printers does Creality name?

Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 S1, Ender 5 S1, Ender 3 Neo, CR-6 and CR-10, among most 1.75mm printers.

Does Creality give print settings?

No temperature or speed appears on the page.

Ender PLA Pro or Hyper PLA?

Choose Ender PLA Pro for tougher everyday parts on standard-speed printers; choose Hyper PLA if your printer runs high speed.

See also