colorFabb WoodFill Filament Review (2026): 600g Wood PLA
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
colorFabb WoodFill is a wood filament for decorative prints where the look and smell of wood matter more than strength: a PLA/PHA blend loaded with fine wood fibers, made in the Netherlands and sold on a 600g spool in 1.75mm. It stands out because colorFabb publishes a full datasheet on the listing: 195-220°C nozzle, 50-60°C bed (or an unheated bed with tape), 40-65mm/s, ±0.05mm diameter tolerance, about 1.2 g/cm³ density and a 55-60°C glass transition. colorFabb advises a 0.4mm or larger nozzle, light retraction and 0.2mm layers, and says slower speeds with taller layers bring out a deeper grain. Expect to sand or varnish for a polished finish. The 600g spool makes this pricier per kilo than most wood PLA, so it suits small decor pieces more than large props. We wrote this review from colorFabb's listing and datasheet.
What stands out
- PLA/PHA blend with wood fibers
- 600g spool, 1.75mm ±0.05mm
- 195-220°C, bed 50-60°C, 40-65mm/s
- Made in the Netherlands
Who it fits
Good fit for
Makers of vases, figurines, boxes and home decor who want a real wood look and smell and are happy to sand or varnish the result.
Who should skip it
Anyone printing functional or load-bearing parts, using a 0.2-0.3mm nozzle, or buying filament by the kilo for big props.
Verdict: A well-documented wood filament for decorative work, priced for small batches.
colorFabb WoodFill specs explained
PLA/PHA + wood fiber
Prints like PLA, looks and smells like wood.
600g spool
Less filament than a 1kg roll; plan bigger jobs.
±0.05mm tolerance
Looser than the ±0.02mm many PLA spools claim.
Tg 55-60°C
Softens in a hot car, like ordinary PLA.
40-65mm/s
Slower than high-speed PLA profiles.
What WoodFill is made of
colorFabb blends PLA with PHA and fine wood fibers, which gives a matte brown surface and a woody scent while printing. The fibers make the strand more abrasive and clog-prone in small nozzles, which is why colorFabb recommends 0.4mm or larger and minimal retraction. Density is around 1.2 g/cm³.
Getting a good grain with colorFabb WoodFill
Start near the middle of 195-220°C and change the temperature to shift the tone: colorFabb notes that temperature changes the color richness. Print at 0.2mm layers and 40-65mm/s, then sand lightly and seal with varnish. Keep the spool dry and clean the nozzle regularly, as colorFabb advises, to avoid partial clogs from fiber build-up.
Before buying colorFabb WoodFill 1.75mm
Checks.
Check before you buy
- Your printer runs a 0.4mm or larger nozzle for colorFabb WoodFill
- A 600g colorFabb spool covers your project
- You plan to sand or varnish the WoodFill print
The product at a glance
ColorFabb WOODFILL 1.75mm 600g
Best for: Wood-look decor
- Material Type
- PLA/PHA blend with wood fibers
- Filament Diameter
- 1.75 mm
- Net Weight
- 600 g
- Max Print Speed
- 65 mm/s
- Dimensional Accuracy
- ±0.05 mm
- Dimensions
- 8.98 × 8.27 × 2.91 inches
View on Amazon: ColorFabb WOODFILL 1.75mm 600g Affiliate link
colorFabb WoodFill 1.75mm, 600g: PLA/PHA with wood fibers, 195-220°C, bed 50-60°C, 40-65mm/s, ±0.05mm, Tg 55-60°C, made in the Netherlands.
Pros
- Full datasheet on the listing
- Real wood look and smell
- Grain tunable by speed and layer height
Cons
- Only 600g per spool
- ±0.05mm tolerance
- Needs 0.4mm+ nozzle; not for strong parts
Good fit if
- You print decor and want a sandable wood finish
Skip if
- You need strong functional parts
Verdict: A documented, decor-first wood filament.
Specifications side by side
| Spec | ColorFabb WOODFILL 1.75mm 600g |
|---|---|
| Material Type | PLA/PHA blend with wood fibers |
| Filament Diameter | 1.75 mm |
| Net Weight | 600 g |
| Max Print Speed | 65 mm/s |
| Dimensional Accuracy | ±0.05 mm |
| Dimensions | 8.98 × 8.27 × 2.91 inches |
| Weight | 1.32 pounds |
| Size | 1.75 mm Diameter/600 g |
| Color | Brown |
| Model | 90-175-376 |
Frequently asked questions
What is colorFabb WoodFill made of?
A PLA/PHA blend with fine wood fibers.
What temperatures does colorFabb list for WoodFill?
195-220°C nozzle and 50-60°C bed, or an unheated bed with tape.
How much filament is on a colorFabb WoodFill spool?
600g.
What nozzle size suits colorFabb WoodFill?
colorFabb recommends 0.4mm or larger.
Can colorFabb WoodFill be sanded?
Yes, colorFabb suggests light sanding or varnish for a polished wood finish.
See also
- sunlu easy pa nylon filament natural review
- sunlu silk pla 4kg gold silver blue green review
- sunlu pa6 gf25 glass fiber nylon filament review
- best 3d printers under 200
- best 3d printers under 300
- Best 3D Printers Under $500 in 2026: 7 Picks Ranked by Specs
- Best 3D Printers Under $1000: 6 Spec-Based Picks
- 6 Best 3D Printers Under $1500, Compared
- geeetech 3d printer kids review
- unxuey 50pcs 3d printer heatsink review
