8 Best Spring Steel Build Plates for 3D Printers, Compared
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
A spring steel plate is a thin, flexible sheet that sits on a magnet; bend it after a print and the part pops off. Our top pick is Creality's original 235x235mm gold PEI sheet for the Ender-3 S1 Pro, K1, K1C and Ender 3 V3 SE, an official part at one of the two lowest prices here. For other machines: Shion.Kwoo sheets for the Prusa Core One, QIDI Plus 4, Ender 5 Max and Creator Pro 2, an IdeaFormer-3D sheet that brings its own magnet, and two MORKEYA plates that do the same job for resin printers. We compared 8 plates using published listings.
Our top pick: Creality 235x235mm Textured PEI Spring Steel Plate.
Quick picks
The best fit for you
- You own a K1C or Ender-3 S1 Pro Creality 235x235mm Textured PEI Spring Steel Plate Official 235mm PEI sheet.
- You print on a Prusa MK4 or Core One Shion.Kwoo 254x241mm Smooth PET and Textured PEI Plate PET and PEI, 254x241mm.
- Your Ender 3 V2 has a glass bed IdeaFormer-3D PEO PET Spring Steel Bed Plate with Magnetic Build Plate 235x235mm, Diamond PEO+Carbon Fiber PET Plate for Ender 3/Pro/Ender 3 V2/V2 Neo/Ender 5/for Elegoo Neptune 3/Neptune 4/Pro Sheet plus magnetic base.
- You own a QIDI Plus 4 Qidi Plus 4 Build Plate Spring Steel PEI Sheet 310x310mm with Magnetic Base | Smooth/Textured PET+ PEI for CR-10S/10 S3/CR-10S pro/CR-10V2 V3/CR-X/CR-X Pro/Artillery Sidewinder SW X1/X2/Anet A8 Plus 310x310mm with magnet.
- You own an Ender 5 Max Shion.Kwoo 415x430mm PET PEO Build Plate 415x430mm sheet.
- You print resin on a Photon M3 Max MORKEYA 310x174mm Photon M3 Max Spring Steel Plate Bend-off resin plate.
Our 8 picks
Creality 235x235mm Textured PEI Spring Steel Plate
Best for: Best overall
- Build Plate Material
- ✓ PEI, Spring Steel
- Dimensions
- 235x235mm
- Build Surface Type
- PEI
- Surface Finish
- Textured
View on Amazon: Creality 235x235mm Textured PEI Spring Steel Plate Affiliate link
Creality's original 235x235mm gold PEI plate on flexible spring steel, made for the Ender-3 S1 Pro and listed for K1, K1C, Ender 3 V3 SE and KE; two handles make it easy to lift off and bend.
Pros
- Official Creality part
- Fits several 235mm Creality printers
- Dual handles
Cons
- Single textured face
- No heat rating given
Good fit if
- Your Ender-3 S1 Pro or K1C sheet is scratched
- You bend plates to pop prints off
Skip if
- You want a smooth face for glossy bottoms
Verdict: The Creality factory spring steel sheet, for less.
Shion.Kwoo 254x241mm Smooth PET and Textured PEI Plate
Best for: Best for Prusa
- Build Plate Material
- ✓ PEI, Spring Steel
- Primary Material
- stainless spring steel
- Dimensions
- 254x241mm
- Build Surface Type
- Smooth PET, textured PEI
View on Amazon: Shion.Kwoo 254x241mm Smooth PET and Textured PEI Plate Affiliate link
Shion.Kwoo 254x241mm plate for Prusa Core One, MK4, MK3S+ and MK2.5: 0.4mm stainless spring steel with smooth carbon-fiber-pattern PET on one side and textured PEI on the other.
Pros
- 0.4mm stainless steel resists rust
- PET and PEI sides
- Also lists CR-6 SE and Aquila Pro
Cons
- PET side meant for PLA and PETG
Good fit if
- You print on a Prusa MK4 or Core One
- You want a patterned PET surface
Skip if
- You print nylon on the PET side
Verdict: Two surfaces for Prusa's 254mm steel bed.
IdeaFormer-3D PEO PET Spring Steel Bed Plate with Magnetic Build Plate 235x235mm, Diamond PEO+Carbon Fiber PET Plate for Ender 3/Pro/Ender 3 V2/V2 Neo/Ender 5/for Elegoo Neptune 3/Neptune 4/Pro
Best for: Best with magnetic base
- Build Plate Material
- ✓ Spring Steel, PEO
- Features
- Carbon Fiber
- Build Plate Size
- 235x235mm
IdeaFormer-3D 235x235mm spring steel plate plus a magnetic base: diamond-pattern PEO on one side, carbon fiber PET on the other, rated to 150℃, for Ender 3, Ender 3 V2, Ender 5 and Neptune 2 and 3.
Pros
- Magnet included
- Two patterned surfaces
- Heat limit stated
Cons
- 150℃ cap rules out some high-temp plastics
Good fit if
- Your Ender 3 V2 still uses a glass bed
- You want patterned bottoms
Skip if
- Your Ender already sits on a magnetic sticker
Verdict: A full spring steel conversion for older 235mm beds.
Qidi Plus 4 Build Plate Spring Steel PEI Sheet 310x310mm with Magnetic Base | Smooth/Textured PET+ PEI for CR-10S/10 S3/CR-10S pro/CR-10V2 V3/CR-X/CR-X Pro/Artillery Sidewinder SW X1/X2/Anet A8 Plus
Best for: Best 310mm
- Build Plate Material
- ✓ PEI, Spring Steel
- Surface Finish
- Smooth, Textured
Shion.Kwoo 310x310mm spring steel sheet with magnetic base for QIDI Plus 4, CR-10, CR-10S Pro, CR-10 V2 and V3, CR-X and Artillery Sidewinder X1 and X2: PET carbon pattern plus PEI on 0.4mm stainless.
Pros
- Magnetic base included
- Fits many 310mm printers
Cons
- Low stock
- No heat rating
Good fit if
- You own a QIDI Plus 4 or Sidewinder X2
- You want PET and PEI on one sheet
Skip if
- Your bed is 300x300mm
Verdict: A 310mm plate for big bed printers.
Shion.Kwoo 415x430mm PET PEO Build Plate
Best for: Best extra large
- Build Plate Material
- ✓ Spring Steel, PEO
- Primary Material
- Stainless spring steel
- Dimensions
- 415x430mm
- Build Surface Type
- PET carbon-fiber, PEO diamond
- Compatible Material
- PLA, PETG, TPU
- Surface Finish
- Smooth
View on Amazon: Shion.Kwoo 415x430mm PET PEO Build Plate Affiliate link
Shion.Kwoo 415x430mm plate for the Creality Ender 5 Max: 0.4mm spring steel with carbon-pattern PET on one side and diamond-pattern PEO on the other, both aimed at PLA and PETG.
Pros
- Sized for the Ender 5 Max
- Two patterned faces
Cons
- Low stock
- Highest price here
Good fit if
- You print big PLA parts on an Ender 5 Max
- You want a second sheet for the Max
Skip if
- You print ABS or nylon
Verdict: A spare sheet for one of the biggest beds.
Shion.Kwoo 230x150mm PET and PEI Build Plate
Best for: Best for small beds
- Primary Material
- stainless spring steel
- Dimensions
- 230x150mm
- Build Surface Type
- Smooth PET, textured PEI
- Compatible Material
- PLA, PETG, ABS, TPU
- Features
- Carbon Fiber
View on Amazon: Shion.Kwoo 230x150mm PET and PEI Build Plate Affiliate link
Shion.Kwoo 230x150mm plate for FLASHFORGE Creator Pro 2, QIDI X-Pro, QIDI Tech 1, Dreamer and Inventor: 0.4mm stainless spring steel, smooth carbon PET plus textured PEI, with a magnetic bed.
Pros
- Fits older dual-extruder printers
- Two surfaces
Cons
- Low stock
- Narrow printer list
Good fit if
- Your Creator Pro 2 still prints on tape
- You want flexible removal on a 230x150mm bed
Skip if
- Your printer is newer than the Creator Pro 2
Verdict: Spring steel for older FLASHFORGE and QIDI beds.
MORKEYA 310x174mm Photon M3 Max Spring Steel Plate
Best for: Best for resin
- Build Plate Material
- ✓ Spring Steel
- Primary Material
- spring steel
- Dimensions
- 310x174mm
- Build Surface Type
- brushed
- Surface Finish
- Textured
View on Amazon: MORKEYA 310x174mm Photon M3 Max Spring Steel Plate Affiliate link
MORKEYA 310x174mm magnetic plate for the ANYCUBIC Photon M3 Max: a brushed spring steel sheet and matching magnetic base, so cured resin parts come off by bending instead of scraping.
Pros
- Ends scraping resin prints
- Brushed surface for first-layer grip
- Steel plate and magnet matched
Cons
- Photon M3 Max only
Good fit if
- You break supports scraping parts off a Photon M3 Max
- You print large resin batches
Skip if
- You print FDM
Verdict: Flex removal for a big resin printer.
237x127mm Magnetic Build Plate for Phrozen Sonic Mighty 8K,Easy Removal | Strong Magnetic 3D Printer Plate,Textured Surface Easy Print Removal,Flexible Spring Steel for Daily Printing
Best for: Best for Mighty 8K
- Build Plate Material
- ✓ Spring Steel
- Surface Finish
- Textured
- Resolution
- 8K
- Dimensions
- 0.79 × 0.79 × 0.79 inches
MORKEYA 237x127mm magnetic plate for the Phrozen Sonic Mighty 8K: brushed flexible spring steel with a matched magnetic base for resin prints that bend off the plate.
Pros
- Made for the Mighty 8K
- Brushed texture for adhesion
Cons
- One printer only
- Offer not rechecked recently
Good fit if
- Your Sonic Mighty 8K prints stick too hard to the stock plate
- You want fewer broken resin parts
Skip if
- You own a different Phrozen printer
Verdict: The resin flex plate for Phrozen's Mighty 8K.
Specifications side by side
| Spec | Creality 235x235mm Textured PEI Spring Steel Plate | Shion.Kwoo 254x241mm Smooth PET and Textured PEI Plate | IdeaFormer-3D PEO PET Spring Steel Bed Plate with Magnetic Build Plate 235x235mm, Diamond PEO+Carbon Fiber PET Plate for Ender 3/Pro/Ender 3 V2/V2 Neo/Ender 5/for Elegoo Neptune 3/Neptune 4/Pro | Qidi Plus 4 Build Plate Spring Steel PEI Sheet 310x310mm with Magnetic Base | Smooth/Textured PET+ PEI for CR-10S/10 S3/CR-10S pro/CR-10V2 V3/CR-X/CR-X Pro/Artillery Sidewinder SW X1/X2/Anet A8 Plus | Shion.Kwoo 415x430mm PET PEO Build Plate | Shion.Kwoo 230x150mm PET and PEI Build Plate | MORKEYA 310x174mm Photon M3 Max Spring Steel Plate | 237x127mm Magnetic Build Plate for Phrozen Sonic Mighty 8K,Easy Removal | Strong Magnetic 3D Printer Plate,Textured Surface Easy Print Removal,Flexible Spring Steel for Daily Printing; |
|---|---|---|---|---|---|---|---|---|
| Primary Material | not stated | stainless spring steel | not stated | not stated | Stainless spring steel | stainless spring steel | spring steel | not stated |
| Dimensions | 235x235mm | 254x241mm | not stated | not stated | 415x430mm | 230x150mm | 310x174mm | not stated |
| Build Surface Type | PEI | Smooth PET, textured PEI | not stated | not stated | PET carbon-fiber, PEO diamond | Smooth PET, textured PEI | brushed | not stated |
| Compatible Material | not stated | not stated | not stated | not stated | PLA, PETG, TPU | PLA, PETG, ABS, TPU | not stated | not stated |
| Features | not stated | not stated | Carbon Fiber | not stated | Carbon Fiber | Carbon Fiber | not stated | not stated |
| Build Plate Material | PEI, Spring Steel | PEI, Spring Steel | Spring Steel, PEO | PEI, Spring Steel | Spring Steel, PEO | PEI | Spring Steel | Spring Steel |
| Build Plate Size | 235x235mm | not stated | 235x235mm | not stated | not stated | not stated | not stated | not stated |
| Surface Finish | Textured | Smooth, Textured | not stated | Smooth, Textured | Smooth | Smooth, Textured | Textured | Textured |
| Resolution | not stated | not stated | not stated | not stated | not stated | not stated | not stated | 8K |
| Size | K1/Ender 3 V3 SE KE/3S1 Pro | 254x241 | 235x235mm | 310x310mm | 415x430mm | 230x150 | 310x174mm(12.2x6.85in) | 237x127mm(9.3x5in) |
| Color | PEI Frosted Gold | PET+PEI | PEO PET+Magnetic Plate | Gold | not stated | PET+PEI | not stated | not stated |
How to choose a spring steel plate
-
Measure your bed, not your print volume
Plates here range from 230x150mm (Creator Pro 2) to 415x430mm (Ender 5 Max); a sheet that overhangs or falls short will lift.
-
Mind the heat limit
IdeaFormer-3D caps its PEO/PET surface at 150℃; the Shion.Kwoo PET sides are pitched at PLA and PETG.
-
Let it cool, then flex
Shion.Kwoo asks you to cool the plate to room temperature before bending it to release the model.
-
Clean with alcohol
Shion.Kwoo recommends 70-75% isopropyl alcohol or mild soap and water, then drying before printing.
Frequently asked questions
Does the Creality 235mm S1 Pro PEI plate fit the K1C?
Creality lists the K1, K1C, Ender 3 V3 SE and KE as compatible with this 235x235mm plate.
How thick is the Shion.Kwoo Prusa Core One plate?
It is 0.4mm stainless spring steel.
Can resin printers use spring steel plates?
Yes. The MORKEYA plates for the Photon M3 Max and Sonic Mighty 8K bend to release cured parts.
What is the IdeaFormer-3D PEO/PET plate's maximum temperature?
IdeaFormer-3D lists 150℃.
Does the Ender 5 Max plate include a magnet?
The listing describes the 415x430mm spring steel sheet only.
See also
- best smooth build plates for 3d printers
- best textured build plates for 3d printers
- best 0 4mm nozzles and hotends
- best 3d printers under 200
- best 3d printers under 300
- Best 3D Printers Under $500 in 2026: 7 Picks Ranked by Specs
- Best 3D Printers Under $1000: 6 Spec-Based Picks
- 6 Best 3D Printers Under $1500, Compared
- best stainless steel blenders
- best stainless steel mandolines






