Best PEO Build Plates for 3D Printers: 7 Spec-Based Picks
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
PEO is a smooth build surface that holds PLA well and leaves a glossy or diamond-pattern underside; most plates pair it with PEI or PET on the back. Our top pick is UniTak3D's 257mm plate for Bambu Lab printers: holographic diamond PEO on one face, textured PEI for PLA, ABS, ASA and PETG on the other. Comgrow's 235mm PEO and PEI sheet is the cheapest pick. The rest: a Comgrow PEO and PET plate for Bambu, Creality's PEO and PEI for the K1 Max, a Shion.Kwoo sheet for the Creator 5, and IdeaFormer-3D kits with magnets for 310mm and 220mm beds. These 7 come from published listings.
Our top pick: UniTak3D 257x257mm Double-Sided PEO and PEI Plate.
Quick picks
The best fit for you
- You own a Bambu P1S, A1 or X1C UniTak3D 257x257mm Double-Sided PEO and PEI Plate Diamond PEO plus textured PEI.
- You want two patterns on a Bambu Comgrow 257x257mm Double-Sided PEO PET Plate PEO and PET.
- You own an Ender 3 V3 SE or K1C Comgrow 235x235mm PEO and PEI Build Plate 235mm PEO and PEI.
- You own a K1 Max Comgrow K1 Max Matte PEI and Smooth PEO Build Plate Official glossy PEO and matte PEI.
- You own a Creator 5 Pro Shion.Kwoo 256x256mm PET PEO Build Plate PEO and PET, 256mm.
- Your Sidewinder X2 has no magnet IdeaFormer-3D PEO+PEI Sheet 310x310mm, PEO+PEI Magnetic Build Plate Spring Steel Plate for CR10, CR10S, for Artillery Sidewinder X1, Sidewinder X2, Anet A8 Plus, Longer LK, LK5 Pro for Qidi Plus 4 310mm with magnetic plate.
Our 7 picks
UniTak3D 257x257mm Double-Sided PEO and PEI Plate
Best for: Best overall
- Build Plate Material
- ✓ PEI, PEO
- Primary Material
- Spring steel
- Dimensions
- 257x257mm
- Maximum Temperature
- 300℃
- Build Surface Type
- Smooth diamond PEO, textured PEI
- Compatible Material
- PLA, PETG, ABS, TPU, Nylon
View on Amazon: UniTak3D 257x257mm Double-Sided PEO and PEI Plate Affiliate link
UniTak3D 257x257mm plate for Bambu Lab A1, P1P, P1S, P2S, X1, X1C, X1E and X2D: smooth diamond PEO that prints a holographic star pattern, textured PEI on the back for PLA through ASA and PETG, and a QR code for the printer.
Pros
- Holographic PEO plus all-round PEI
- QR code for Bambu printers
- Warp-free spring steel
Cons
- Peel the PEO film before first use
Good fit if
- You print gifts with sparkly bottoms on a P1S
- You also need a PEI side for ASA
Skip if
- You only print plain functional parts
Verdict: PEO sparkle and PEI grip on one Bambu plate.
Comgrow 257x257mm Double-Sided PEO PET Plate
Best for: Best PEO and PET
- Build Plate Material
- ✓ Spring Steel, PEO
- Primary Material
- Spring steel
- Dimensions
- 257x257 mm
- Build Surface Type
- Diamond PEO, textured PET
- Features
- Carbon Fiber
- Build Plate Size
- 257x257mm
View on Amazon: Comgrow 257x257mm Double-Sided PEO PET Plate Affiliate link
Comgrow 257x257mm plate for Bambu Lab A1, P1P, P1S, X1, X1C and X1E: diamond-pattern PEO on one side, carbon fiber pattern PET on the other, with suggested bed temperatures of 60-65℃ for PLA and 70-80℃ for PETG.
Pros
- Two patterned faces
- Bed temperatures given
Cons
- No plain textured PEI side
Good fit if
- You want two decorative finishes on an A1
- You print PLA and PETG only
Skip if
- You print ABS or nylon
Verdict: Two patterns, no plain side.
Comgrow 235x235mm PEO and PEI Build Plate
Best for: Best budget
- Build Plate Material
- ✓ PEI, Spring Steel, PEO
- Primary Material
- spring steel
- Dimensions
- 235X235mm
- Maximum Temperature
- 120°C
- Build Surface Type
- Smooth PEO and Textured PEI
View on Amazon: Comgrow 235x235mm PEO and PEI Build Plate Affiliate link
Comgrow 235x235mm spring steel sheet: smooth PEO on one side, gold matte PEI on the other, magnetic, listed for Neptune 3 Pro, Neptune 4 and 4 Pro, K1C, K1, Ender 3 V3, V3 SE and V3 KE.
Pros
- Cheapest pick here
- Fits many 235mm printers
Cons
- No heat rating per side
Good fit if
- You own an Ender 3 V3 SE and want a glossy PLA side
- You print on a Neptune 4 Pro
Skip if
- Your bed is bigger than 235mm
Verdict: Low-cost PEO and PEI for 235mm beds.
Comgrow K1 Max Matte PEI and Smooth PEO Build Plate
Best for: Best for K1 Max
- Build Plate Material
- ✓ PEI, Spring Steel, PEO
- Primary Material
- spring steel
- Dimensions
- 315*310
- Build Surface Type
- Textured PEI and Smooth PEO
- Finish
- Matte
View on Amazon: Comgrow K1 Max Matte PEI and Smooth PEO Build Plate Affiliate link
Official Creality K1 Max plate (315x310mm) sold by Comgrow: glossy PEO on one side, matte frosted PEI on the other, dual handles and positioning holes, for PLA, ABS, ASA, PETG, TPU, PC and PA.
Pros
- Made for the K1 Max
- Glossy and matte faces
- Wide material list
Cons
- Low stock
Good fit if
- You print large ASA panels on a K1 Max
- You want a glossy side for PLA
Skip if
- You own a K1C
Verdict: Official PEO and PEI for the K1 Max.
Shion.Kwoo 256x256mm PET PEO Build Plate
Best for: Best for Creator 5
- Build Plate Material
- ✓ Spring Steel, PEO
- Primary Material
- Stainless spring steel
- Dimensions
- 256x256mm
- Build Surface Type
- PET carbon fiber, PEO diamond
- Compatible Material
- PLA, PETG, TPU
View on Amazon: Shion.Kwoo 256x256mm PET PEO Build Plate Affiliate link
Shion.Kwoo 256x256mm plate for FLASHFORGE Creator 5 and Creator 5 Pro: 0.4mm stainless spring steel with diamond-pattern PEO and carbon-pattern PET faces for PLA and PETG.
Pros
- Fits Creator 5 and 5 Pro
- Rust-resistant stainless
Cons
- PLA and PETG only
Good fit if
- You print decorative PLA on a Creator 5 Pro
- You want patterned bottoms
Skip if
- You print PC or nylon
Verdict: Patterned PEO for the Creator 5.
IdeaFormer-3D PEO+PEI Sheet 310x310mm, PEO+PEI Magnetic Build Plate Spring Steel Plate for CR10, CR10S, for Artillery Sidewinder X1, Sidewinder X2, Anet A8 Plus, Longer LK, LK5 Pro for Qidi Plus 4
Best for: Best 310mm
- Build Plate Material
- ✓ PEI, Spring Steel, PEO
IdeaFormer-3D 310x310mm kit with magnetic plate: smooth PEO rated to 120°C for PLA only, textured PEI rated to 260°C for PLA, ABS, PETG, TPU and nylon; for CR-10, CR-10S, Sidewinder X1 and X2 and Anet A8 Plus.
Pros
- Magnet included
- Heat ratings per side
- Big 310mm size
Cons
- PEO side is PLA-only
Good fit if
- Your Sidewinder X2 still uses glass
- You want both a glossy and a grippy side
Skip if
- You print PETG on smooth surfaces
Verdict: PEO and PEI with a magnet for 310mm beds.
IdeaFormer-3D 220x220mm PEO+PEI Plate
Best for: Best 220mm
- Build Plate Material
- ✓ PEI, Spring Steel, PEO
- Primary Material
- Spring steel
- Dimensions
- 220x220mm
- Maximum Temperature
- 120℃ (PEO), 260℃ (PEI)
- Build Surface Type
- Smooth PEO, Textured PEI
View on Amazon: IdeaFormer-3D 220x220mm PEO+PEI Plate Affiliate link
IdeaFormer-3D 220x220mm kit with magnetic sticker: smooth PEO (120℃, PLA only) and textured PEI (260℃) for Artillery Genius and Genius Pro, Prusa MK2 and MK2A, Anet A8 and A6.
Pros
- Magnet included
- Fits older 220mm printers
Cons
- PEO side is PLA-only
- Older printer list
Good fit if
- You still print on an Anet A8 or Artillery Genius
- You want hand-removable prints
Skip if
- Your printer has a 235mm bed
Verdict: PEO and PEI for 220mm printers.
Specifications side by side
| Spec | UniTak3D 257x257mm Double-Sided PEO and PEI Plate | Comgrow 257x257mm Double-Sided PEO PET Plate | Comgrow 235x235mm PEO and PEI Build Plate | Comgrow K1 Max Matte PEI and Smooth PEO Build Plate | Shion.Kwoo 256x256mm PET PEO Build Plate | IdeaFormer-3D PEO+PEI Sheet 310x310mm, PEO+PEI Magnetic Build Plate Spring Steel Plate for CR10, CR10S, for Artillery Sidewinder X1, Sidewinder X2, Anet A8 Plus, Longer LK, LK5 Pro for Qidi Plus 4 | IdeaFormer-3D 220x220mm PEO+PEI Plate |
|---|---|---|---|---|---|---|---|
| Primary Material | Spring steel | Spring steel | spring steel | spring steel | Stainless spring steel | not stated | Spring steel |
| Dimensions | 257x257mm | 257x257 mm | 235X235mm | 315*310 | 256x256mm | not stated | 220x220mm |
| Maximum Temperature | 300℃ | not stated | 120°C | not stated | not stated | not stated | 120℃ (PEO), 260℃ (PEI) |
| Build Surface Type | Smooth diamond PEO, textured PEI | Diamond PEO, textured PET | Smooth PEO and Textured PEI | Textured PEI and Smooth PEO | PET carbon fiber, PEO diamond | not stated | Smooth PEO, Textured PEI |
| Compatible Material | PLA, PETG, ABS, TPU, Nylon | not stated | not stated | not stated | PLA, PETG, TPU | not stated | not stated |
| Features | not stated | Carbon Fiber | not stated | not stated | Carbon Fiber | not stated | not stated |
| Finish | not stated | not stated | not stated | Matte | not stated | not stated | not stated |
| Build Plate Material | PEI, PEO | Spring Steel, PEO | PEI, Spring Steel, PEO | PEI, Spring Steel, PEO | Spring Steel, PEO | PEI, Spring Steel, PEO | PEI, Spring Steel, PEO |
| Build Plate Size | not stated | 257x257mm | 235x235mm | not stated | not stated | not stated | not stated |
| Surface Finish | Smooth, Textured | Smooth | Smooth, Textured | not stated | not stated | not stated | Smooth, Textured |
| Weight | 12.7 ounces | not stated | not stated | not stated | not stated | not stated | not stated |
| Size | for Bambu Lab A1/P2S/P1S/P1P/X1C/X1/X1E/X2D | 257*257mm | 235*235 for For Ender 3 V3 KE | 315*310 For K1 Max | 256×256mm | 310x310mm | 220x220mm |
| Color | Double Sided PEI+PEO | not stated | not stated | not stated | not stated | PEO PEI+Magnetic Plate | PEO PEI+Magnetic Plate |
| Model | Uni103A1D | not stated | not stated | not stated | not stated | PEI+PEO | PEI+PEO |
How to choose a PEO build plate
-
Keep PEO for PLA
IdeaFormer-3D limits its PEO to PLA at up to 120°C; switch to the PEI side for ABS, PETG and nylon.
-
Clean before every print
Comgrow recommends a good spray of isopropyl alcohol and a lint-free wipe between prints.
-
Remove the protective film
UniTak3D asks you to peel the film off the PEO side before the first print.
-
Let prints cool
IdeaFormer-3D says prints come off by hand once the surface has cooled.
Frequently asked questions
What can I print on IdeaFormer-3D's PEO side?
PLA only, at up to 120°C, according to IdeaFormer-3D.
What bed temperature does Comgrow suggest for PETG on its PEO and PET plate?
70-80℃, with 60-65℃ for PLA.
Does the UniTak3D PEO plate fit the Bambu A1?
Yes, it lists A1, P1P, P1S, P2S, X1, X1C, X1E and X2D.
Is the K1 Max PEO and PEI plate an official Creality part?
Yes, it is sold as an official Creality K1 Max plate.
Which PEO plates here include a magnet?
The IdeaFormer-3D 310mm and 220mm kits.
See also
- best 235x235mm build plates
- best ACF films for resin 3d printers
- best 257x257mm build plates for bambu lab
- best 3d printers under 200
- best 3d printers under 300
- Best 3D Printers Under $500 in 2026: 7 Picks Ranked by Specs
- Best 3D Printers Under $1000: 6 Spec-Based Picks
- 6 Best 3D Printers Under $1500, Compared
- best infrared sauna accessories
- best laser printers with scan






