AORITA3D 280×200mm ACF Release Film 2-Pack Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
ACF is a thicker, stiffer release film that many newer 10-inch resin printers use for quick, quiet peeling. AORITA3D's pack holds two 0.3mm ACF sheets for under $25, and the bullet list of compatible machines is long: Anycubic's Photon Mono M5s, M5s Pro, M7 Pro, Mono X family and M3 Plus; Elegoo's Saturn line through Saturn 4 Ultra plus Mars 4 Max; Creality Halot-Sky and Halot Lite; Proxima and Foto 8.9; and GK2. The seller says it outlasts NFEP, releases with less force and noise, and runs steadily at 260°C with a 305°C melting point. Sizes conflict between title and bullets, covered below. This review summarizes the listing; we have not fitted the film.
What stands out
- Two 0.3mm ACF sheets
- Lower release force than nFEP, per AORITA3D
- Long list of 10-inch class printers
- Rated 260°C continuous
Who it fits
Good fit for
Owners of Photon Mono M5s/M7 Pro, Saturn 3 or 4 and similar 10-inch printers that ship with ACF and need affordable replacements.
Who should skip it
Printers tuned for FEP or NFEP may need new lift settings after a switch to ACF. Anyone wanting a five-sheet stock pile should look at larger multi-packs.
Verdict: Affordable ACF spares for a wide range of 10-inch resin printers, once you confirm the size.
ACF film numbers
0.3mm ACF
Stiffer than FEP; the film type many fast resin printers expect.
280×200mm (bullets) / 278×190mm (title)
Measure your vat; the two figures disagree.
260°C working, 305°C melt
Heat ratings far above vat conditions; mostly a durability signal.
2 pieces
One fitted, one spare.
Size and naming conflicts
The title gives 278×190mm and "10.1 inch", while the first bullet and spec field say 280×200mm. The title names Anycubic Fast 12K and 14K printers, which do not appear in the bullet list. Confirm your frame's film size before ordering, since ACF is less forgiving to stretch than FEP.
Using ACF film
ACF does not tension like FEP, so it mounts flat in a frame designed for it. Clean it with soft paper and alcohol only, and avoid metal scrapers in the vat. If prints start sticking to the film, check the surface for scratches before raising exposure.
Before ordering ACF film
Run through these.
Check before you buy
- Your printer uses or supports ACF
- Your vat frame matches 280×200 or 278×190
- AORITA3D names your exact Photon, Saturn or Halot model
- Two sheets is enough for now
The product at a glance
Aorita3D 280x200mm 0.3mm ACF Release Film
Best for: 10-inch resin printer film swaps
- Dimensions
- 280*200*0.3mm
- Maximum Temperature
- 260 °C
- Release Film Type
- ACF
- Film Thickness
- 0.3mm
- Printing Technology
- Resin
- Features
- High Speed
View on Amazon: Aorita3D 280x200mm 0.3mm ACF Release Film Affiliate link
AORITA3D ACF film: two 0.3mm release sheets for 10-inch class resin printers including Photon Mono M5s/M7 Pro and Saturn 3/4, rated 260°C.
Pros
- Cheap replacement ACF
- Broad printer list
- Claims lower peel force
Cons
- Title and bullet sizes disagree
- Only two sheets
Good fit if
- Your M5s or M7 Pro film is worn
- You keep one ACF spare on hand
Skip if
- Your printer is set up for FEP
- You need a large-format film
Verdict: Budget ACF replacements; measure first.
Specifications side by side
| Spec | Aorita3D 280x200mm 0.3mm ACF Release Film |
|---|---|
| Dimensions | 280*200*0.3mm |
| Maximum Temperature | 260 °C |
| Release Film Type | ACF |
| Film Thickness | 0.3mm |
| Printing Technology | Resin |
| Features | High Speed |
| Resolution | 12K, 14K |
| Size | ACF 280*200 |
Frequently asked questions
How thick is AORITA3D's 2-pack ACF film?
0.3mm.
What size is the AORITA3D 2-pack ACF film?
The bullets say 280×200mm; the title says 278×190mm.
Does this AORITA3D ACF film fit the Saturn 4 Ultra?
Saturn 4 Ultra is on the listing's compatibility list.
How does ACF compare with NFEP per AORITA3D?
It claims longer life, lower peel force and quieter release.
Featured in
See also
- rodin trumodel dental model resin review
- rodin denture base 2 0 resin review
- rodin surgical guide 2 0 resin review
- aorita3d nfep release film 280x200 review
- aorita3d nfep film 290x210mm 5 pack review
- AORITA3D 450x300mm ACF Release Film V3.0 Review (2026)
- jbl quantum 200 review
- nzxt kraken 280 review
