As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

ANYCUBIC Photon P1 Max (Black) Resin 3D Printer Review (2026)

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

The Photon P1 Max is ANYCUBIC's large resin printer, and this black listing is the one that spells out the hardware behind the print quality. The screen is a 14-inch 12K mono panel at 11520 × 8640 pixels with 24.8 × 24.8µm square pixels, lit by LighTurbo 3.0. Motion runs on C7-grade ball screws with linear rails, rated at ±0.01mm repeat positioning, which is the kind of mechanical spec more often seen on dental and engineering machines than hobby printers. Build volume is 285.5 × 214 × 300mm (18.3L), big enough for a full-size helmet section or a dense plate of miniatures. A 1.9L tank heats resin to 35°C, which helps thick engineering or tough resins flow in a cold room, and Auto-Leveling 3.0 checks the plate with force feedback before each print. AI inspection appears in the title, though this listing's bullets do not describe it. The same printer is also sold in white. The specs come from ANYCUBIC's black-model listing.

What stands out

  • 14-inch 12K mono screen, 24.8µm square pixels
  • 285.5 × 214 × 300mm (18.3L) build
  • 1.9L tank heated to 35°C
  • C7 ball screws, ±0.01mm repeatability

Who it fits

Good fit for

Print farms, cosplay and prop makers, and small shops printing large resin parts or packed batch plates where precision matters.

Who should skip it

Hobbyists printing a few miniatures at a time, or anyone short on bench space: the printer is about 20 × 21 × 30 inches.

Verdict: A large resin printer with unusually serious motion hardware; worth it if you fill the plate.

P1 Max black, spec by spec

14in 12K, 11520 × 8640 px, 24.8µm

Square pixels give even detail in both directions.

285.5 × 214 × 300mm

Tall parts and big batch plates in one run.

1.9L heated vat, up to 35°C

Thick resins flow consistently in cool rooms.

C7 ball screws, linear rails, ±0.01mm

Repeatable Z steps for smooth layer stacking.

Auto-Leveling 3.0

Self-check and force feedback before each print.

Why the mechanics matter at this size

On a tall resin print, small Z wobble shows up as banding across the whole part. Ball screws with rails keep each layer step consistent, and that is what this listing emphasizes. The heated vat solves the other large-format problem: a big tank of cold resin flows slowly and peels unevenly. Square 24.8µm pixels keep XY detail even across a 14-inch panel. The black and white listings describe the same printer, so choose by price and color.

Running a P1 Max

Let the tank warm before long prints, especially with tough or engineering resin. A full 1.9L vat is heavy, so fill it in place rather than carrying it. Large plates mean large wash and cure jobs: plan for a wash station big enough for the 285.5 × 214mm plate or batch parts by hand. Ventilate the room, as an 18L printer can hold a lot of open resin.

Before ordering the P1 Max

A quick check for ANYCUBIC's large resin printer.

Check before you buy

  • You will fill a 285.5 × 214mm P1 Max plate often
  • You have a wash and cure setup sized for P1 Max parts
  • Your bench can hold a P1 Max of about 20 × 21 × 30 inches

The product at a glance

Anycubic Photon P1 Max Large Resin Printer

Best for: Large resin parts and batch runs

Build Volume
285.5 × 214 × 300 mm
Printing Technology
Resin
Leveling Type
Auto-Leveling 3.0
Color
Black
Resolution
12K
Dimensions
20.1 × 20.9 × 29.5 inches

View on Amazon: Anycubic Photon P1 Max Large Resin Printer Affiliate link

ANYCUBIC Photon P1 Max, black: 14-inch 12K resin printer with a 285.5 × 214 × 300mm build, heated 1.9L tank and C7 ball screws.

Pros

  • Large 18.3L build volume
  • Ball screws with ±0.01mm repeatability
  • Heated tank for thick resins

Cons

  • Big footprint
  • AI inspection not detailed in the bullets
  • Needs a large wash and cure setup

Good fit if

  • You batch-print resin parts
  • You print large props or prototypes

Skip if

  • You print a few minis at a time

Verdict: A serious large-format resin printer for full plates.

Specifications side by side

Spec Anycubic Photon P1 Max Large Resin Printer
Build Volume 285.5 × 214 × 300 mm
Printing Technology Resin
Leveling Type Auto-Leveling 3.0
Leveling Auto Leveling
Color Black
Resolution 12K
Dimensions 20.1 × 20.9 × 29.5 inches
Weight 50.9 pounds

Frequently asked questions

What is the Photon P1 Max build volume?

285.5 × 214 × 300mm, or 18.3L.

What screen does the Photon P1 Max use?

A 14-inch 12K mono LCD, 11520 × 8640 pixels at 24.8µm.

Does the Photon P1 Max heat the resin?

Yes, its 1.9L tank heats resin up to 35°C.

Is the black P1 Max different from the white one?

The listings describe the same printer; only the color differs.

See also