ANYCUBIC Photon P1 14K with Dual-Color Kit (White) Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This white Photon P1 14K comes with ANYCUBIC's dual kit, which splits the build into two resin zones so one print can combine two colors or two materials, say a rigid body with a flexible part, or a test piece in costly engineering resin next to a cheap standard one. ANYCUBIC also notes that splitting the vat cuts how much resin you must pour for small models. The base printer is the P1: a 10.1-inch mono LCD, build size 8.79 × 4.96 × 9.05 in, ball screws with precision rails and a platform flat to under 80µm. This white listing is the one that explains the LighTurbo 4.0 optics: an aspherical Fresnel lens keeps light within 2°, rolling calibration gives over 92% uniformity across the screen, and an 8mm copper cooler keeps output stable. Wave Release is said to cut release force by over 60% against smooth nFEP film, and AI checks the plate, the first layers, the resin level and vat residue. The page lists 22 lb, while a black dual listing gives 39 lb, so check the shipping weight. Our summary follows ANYCUBIC's listing.
What stands out
- Dual kit for two colors or two materials in one print
- LighTurbo 4.0: 2° light angle, over 92% uniformity
- Ball screws, platform flatness under 80µm
- Wave Release, AI print checks
Who it fits
Good fit for
Resin users who want two-material prototypes, two-color figures, or less resin in the vat when testing expensive engineering resins.
Who should skip it
Anyone who only prints one resin at a time, or who needs a build plate larger than about 8.8 × 5 inches.
Verdict: A well-specified mid-size resin printer; the dual kit is the reason to pick this bundle over the plain P1.
Photon P1 14K dual bundle, spec by spec
Dual-color/-material kit
Two resins print side by side in one job.
10.1in mono LCD, 8.79 × 4.96 × 9.05in build
Mid-size: minis, parts and small props.
LighTurbo 4.0, 2° light angle, >92% uniformity
Even exposure across the whole screen.
Ball screws, rails, <80µm platform flatness
Steady Z motion and an even first layer.
Wave Release, over 60% less force than nFEP
Gentler peeling for fine features.
What the dual kit changes
With the kit fitted, the vat and plate are split so each half holds its own resin. That is useful for multi-material prototypes and for sampling costly resins without filling a full vat. It also halves the usable area for any single part, so large one-piece prints are better done with the standard vat and plate. The same bundle appears in black under a separate listing.
Running the P1 with two resins
Keep each resin to its own side and label the halves, as mixing contaminates both. Expect different exposure needs for two materials: pair resins with similar settings or accept a compromise. Leveling 3.0 and the AI checks run before each print, and Wave Release helps when one side holds a soft or flexible resin that tears easily.
Before ordering the P1 dual bundle
A quick check for this white Photon P1 bundle.
Check before you buy
- You want two-resin prints on the Photon P1
- Your Photon P1 parts fit about 8.8 × 5 × 9 inches
- You can pair resins with similar exposure for the Photon P1 kit
The product at a glance
ANYCUBIC Photon P1 Dual-Color Resin Printer
Best for: Two-color and two-material resin prints
- Build Volume
- 8.79x4.96x9.05in
- Printing Technology
- Resin
- Multicolor Capacity
- Dual-color/-material
- Leveling Type
- Intelligent Leveling system 3.0
- Color
- White
- Resolution
- 14K
View on Amazon: ANYCUBIC Photon P1 Dual-Color Resin Printer Affiliate link
ANYCUBIC Photon P1 14K in white with the dual kit: two-resin printing, LighTurbo 4.0 optics, ball screws and Wave Release.
Pros
- Two colors or materials in one print
- Detailed optics specs
- Ball screws and flat platform
Cons
- Dual mode halves the part size
- Weight differs between listings
- No resolution in pixels stated
Good fit if
- You prototype with two materials
- You sample costly resins
Skip if
- You print one resin at a time
Verdict: A capable P1 bundle for two-resin work.
Specifications side by side
| Spec | ANYCUBIC Photon P1 Dual-Color Resin Printer |
|---|---|
| Build Volume | 8.79x4.96x9.05in |
| Printing Technology | Resin |
| Multicolor Capacity | Dual-color/-material |
| Leveling Type | Intelligent Leveling system 3.0 |
| Color | White |
| Color Effect | Dual Color |
| Resolution | 14K |
| Dimensions | 33.1 × 17.7 × 18.1 inches |
| Weight | 22 pounds |
| Size | Photon P1 with Dual Kit |
Frequently asked questions
Does this white Photon P1 bundle handle two resins in one job?
Yes, with the included dual-color/-material kit.
How big a part fits in the white Photon P1 dual bundle?
8.79 × 4.96 × 9.05 inches.
What is LighTurbo 4.0 on the Photon P1?
An optics system with an aspherical Fresnel lens (2° light angle), over 92% uniformity and copper cooling.
How much does the Photon P1 dual bundle weigh?
This listing says 22 lb; a black dual listing says 39 lb, so treat the figure with care.
See also
- anycubic kobra s1 ace 2 pro combo quiet home review
- longer lk5 pro dual z axis cosplay props review
- longer lk5 pro 3 b1 filament guide review
- anycubic wash cure 3 gooseneck review
- anycubic kobra x multicolor 3d printer review
- ANYCUBIC Photon P1 14K Resin 3D Printer Review: Specs, Pros and Cons
- ANYCUBIC Photon Mono 4 10K Review: Who It Fits and Who Should Skip It
- ANYCUBIC Kobra S1 Max Enclosed Review: Who It Fits and Who Should Skip It
- anycubic photon p1 dual color resin review
- koveyzao atomstack p1 dual laser engraver review
