As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

Longer LK5 Pro Dual Z-Axis Review for Cosplay and Large Props (2026)

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

This LK5 Pro listing pitches Longer's big bed-slinger at cosplay props, organizers and oversized prototypes, and that is a fair way to judge it. A 300mm square bed with 400mm of height fits a helmet half, a gauntlet or a long sword section that a 220mm printer would force you to split into many pieces. Tall prints are where the frame matters, and this listing names dual Z-axis drive plus diagonal braces to keep the gantry level and steady as the nozzle climbs. Long prop jobs also run for a day or more, so filament runout detection and power-loss resume are useful rather than nice extras. Setup is about 90% done out of the box, with a 4.3-inch color touchscreen, quiet TMC2209 drivers and open-source firmware. It is rated at 180mm/s, slow next to newer CoreXY machines, and the listing mentions no auto bed leveling or enclosure. We judged it from Longer's listing.

What stands out

  • 300 × 300 × 400mm build for helmets and armor
  • Dual Z-axis plus diagonal braces
  • Runout sensor and power-loss resume
  • 4.3in touchscreen, about 90% pre-assembled

Who it fits

Good fit for

Cosplayers and prop makers on a budget who print big PLA pieces and can live with long print times.

Who should skip it

Anyone who wants fast prints, hands-free bed leveling, or an enclosure for ABS.

Verdict: A lot of build height for the money; patience is the price for prop makers.

LK5 Pro for prop work

300 × 300 × 400mm

Fits helmet halves and long props in fewer pieces.

Dual Z-axis, diagonal braces

Keeps the gantry level on tall jobs.

Runout and power-loss resume

Protects long, multi-day prints.

180mm/s

Large props will still take many hours.

Lattice glass bed, 26.5 lb

Flat surface, parts release once cool.

What helps tall prints on this frame

A bed-slinger with a tall Z axis can wobble near the top of a print. Two Z motors lift both sides of the gantry together, and the diagonal braces tie the uprights to the base. That is the main reason this listing suits props. The bed moves on Y, so very tall, thin parts still need a brim or supports. No enclosure is listed, which keeps it to PLA and PETG for most prop work.

Printing props on the LK5 Pro

Level the bed carefully before a big job, since no auto leveling is listed. Slice large helmets with thicker layers to cut hours, and leave room on the plate for a wide brim. Check that the spool holds enough filament or trust the runout sensor to pause the job. The 4.3-inch screen shows progress, but plan to check on prints that run overnight.

Before ordering for prop work

A quick check for the dual Z LK5 Pro.

Check before you buy

  • Your props fit a 300mm LK5 Pro bed with 400mm of height
  • You can level the LK5 Pro bed by hand
  • You print props in PLA or PETG on the LK5 Pro

The product at a glance

Longer LK5 Pro Dual Z-Axis 3D Printer

Best for: Cosplay props and tall prints

Build Volume
300x300x400mm
Print Speed
180mm/s
Color
Black
Application
Functional Parts
Dimensions
11.8 × 11.8 × 15.8 inches
Weight
26.5 pounds

View on Amazon: Longer LK5 Pro Dual Z-Axis 3D Printer Affiliate link

Longer LK5 Pro with dual Z-axis: a 300 × 300 × 400mm bed-slinger with a braced frame, aimed at big props and prototypes.

Pros

  • Tall 400mm build height
  • Dual Z and diagonal braces
  • Runout and resume for long jobs

Cons

  • 180mm/s is slow for big parts
  • No auto bed leveling listed
  • No enclosure

Good fit if

  • You print cosplay helmets and armor

Skip if

  • You need fast or hands-free printing

Verdict: A budget big-volume printer for prop makers.

Specifications side by side

Spec Longer LK5 Pro Dual Z-Axis 3D Printer
Build Volume 300x300x400mm
Print Speed 180mm/s
Color Black
Application Functional Parts
Dimensions 11.8 × 11.8 × 15.8 inches
Weight 26.5 pounds
Size 300x300x400mm
Model LK5 Pro

Frequently asked questions

Can the Longer LK5 Pro print a cosplay helmet?

Its 300 × 300 × 400mm volume fits many helmets in two halves or even whole, depending on size.

Does this LK5 Pro listing have dual Z-axis?

Yes, the listing names dual Z-axis support and diagonal braces.

How fast is the LK5 Pro for props?

It is rated at 180mm/s, so big parts take many hours.

What happens if the LK5 Pro loses power mid-print?

It resumes from the last saved position when power returns.

See also