ANYCUBIC Kobra S1 ACE 2 Pro Combo for Quiet Home Printing: Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The Kobra S1 ACE 2 Pro Combo is ANYCUBIC's enclosed CoreXY printer sold with one ACE 2 Pro box, and this listing leans on how it behaves in a home. Its standout figure is 44dB, which ANYCUBIC credits to four independent brushless motors and a new buffer, low enough that it is pitched for running near people who work or sleep. The enclosure matters for the same reason: it contains some noise and keeps heat around the 250×250×250mm build, so ABS and ASA become realistic alongside PLA and PETG. The ACE 2 Pro feeds four colors and dries spools at 65°C during a print; four boxes take it to 16 colors. The hotend reaches 320°C and has a ceramic feed port meant to resist wear and clogs, and the printer is rated at 600mm/s. It weighs 39.7 lb. ANYCUBIC warns that the older ACE Pro and the ACE 2 Pro cannot run together. We took these points from the S1 combo listing.
What stands out
- 44dB with four brushless motors
- Enclosed CoreXY, 250×250×250mm
- ACE 2 Pro: 4 colors, 65°C drying while printing
- 320°C hotend, 600mm/s
Who it fits
Good fit for
Home users who print in shared rooms and want multicolor PLA plus enclosed ABS or ASA without loud fans and motors.
Who should skip it
Owners of an ACE Pro hoping to reuse it, or anyone who needs a build volume past 250mm.
Verdict: One of the quieter enclosed multicolor bundles on paper; a good match for a home office or apartment.
Kobra S1 ACE 2 Pro Combo for the home
44dB
Quiet enough for a room people use, per ANYCUBIC.
Enclosed CoreXY, 250mm cube
Holds heat for ABS and ASA and dampens noise.
ACE 2 Pro, 4 colors, 16 with four
Multicolor out of the box; dries at 65°C mid-print.
320°C hotend, ceramic feed port
Room for higher-temperature filaments.
600mm/s, 39.7 lb
Fast CoreXY motion in a heavy, stable frame.
Quiet, closed and dry
Three parts of the design point at home use. Brushless motors and the buffer cut noise to a listed 44dB. The enclosure keeps warm air in for ABS and ASA, though any closed printer printing those materials still benefits from a ventilated room. The ACE 2 Pro keeps filament dry while it feeds, which helps PETG and nylon-blend users in humid homes. ANYCUBIC lists smart sensors and auto-resume, useful if a power cut hits an overnight job.
Running it in a shared room
Place the printer on a solid surface, as a 39.7 lb machine moving at CoreXY speeds still passes vibration to a light desk. Run the ACE 2 Pro dryer before long PETG or ASA jobs. For overnight prints, check the slicer purge settings for multicolor jobs to keep waste down, and keep the room aired when printing ABS or ASA.
Before ordering the Kobra S1 ACE 2 Pro Combo
Three points to settle for the S1 combo.
Check before you buy
- You want the Kobra S1 quiet enough for a shared room
- Your Kobra S1 parts fit a 250mm cube
- You will not pair an older ACE Pro with the Kobra S1 ACE 2 Pro
The product at a glance
Anycubic Kobra S1 Multicolor FDM Printer
Best for: Quiet multicolor printing at home
- Build Volume
- 250×250×250 mm³
- Print Speed
- 600mm/s
- Printing Technology
- FDM
- Multicolor Capacity
- 4-color, expandable to 16 colors
- Motion Structure
- CoreXY
- Color Printing
- Multi-Color
View on Amazon: Anycubic Kobra S1 Multicolor FDM Printer Affiliate link
ANYCUBIC Kobra S1 with ACE 2 Pro: an enclosed 250mm CoreXY printer at a listed 44dB, with 4-color feeding and 65°C drying.
Pros
- Very low listed noise
- Enclosure for ABS and ASA
- Dries filament while printing
Cons
- Not compatible with the older ACE Pro
- 250mm build cube
- Heavy at 39.7 lb
Good fit if
- Your Kobra S1 shares a room with people
- You want multicolor plus ABS/ASA
Skip if
- You own an ACE Pro and want to reuse it
Verdict: A quiet enclosed multicolor bundle for home users.
Specifications side by side
| Spec | Anycubic Kobra S1 Multicolor FDM Printer |
|---|---|
| Build Volume | 250×250×250 mm³ |
| Print Speed | 600mm/s |
| Printing Technology | FDM |
| Multicolor Capacity | 4-color, expandable to 16 colors |
| Motion Structure | CoreXY |
| Color Printing | Multi-Color |
| Structure | CoreXY |
| Features | Enclosed |
| Target Audience | Beginners |
| Color | Black |
| Dimensions | 15.8 × 16.1 × 19.3 inches |
| Weight | 39.7 pounds |
Frequently asked questions
How loud is the Kobra S1 ACE 2 Pro Combo?
ANYCUBIC lists 44dB, using four brushless motors and a new buffer.
Can the Kobra S1 print ABS and ASA?
Its enclosed frame and 320°C hotend suit them, and the listing names both.
Can I use my ACE Pro with the ACE 2 Pro on a Kobra S1?
No, ANYCUBIC says the two cannot be used at the same time.
How many colors does the Kobra S1 ACE 2 Pro Combo print?
Four with the included box, up to 16 with four ACE 2 Pro units.
See also
- longer lk5 pro dual z axis cosplay props review
- longer lk5 pro 3 b1 filament guide review
- longer lk5 pro 3 bltouch open source review
- anycubic wash cure 3 gooseneck review
- anycubic kobra x multicolor 3d printer review
- ANYCUBIC Photon P1 14K Resin 3D Printer Review: Specs, Pros and Cons
- ANYCUBIC Photon Mono 4 10K Review: Who It Fits and Who Should Skip It
- ANYCUBIC Kobra S1 Max Enclosed Review: Who It Fits and Who Should Skip It
- anycubic kobra s1 multicolor fdm review
- glashow s1 mobility scooter review
