Longer LK5 Pro 3 (LK5 Pro-B1) Review: Which Filaments It Handles (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The Longer LK5 Pro 3 (model LK5 Pro-B1) is an open-frame printer, and its listing says more about materials than most. Longer names PLA, ABS, PETG and wood-fill filament. A silicon carbide lattice glass bed spreads heat evenly for adhesion, dual fans cool the extruded plastic quickly, and a Teflon (PTFE) tube guides filament into the hot end. That combination suits PLA, PETG and wood blends well. ABS is possible but harder: the printer is open, so warping and drafts are a risk on large parts, and the listing gives no nozzle or bed temperature to judge high-temperature work. TPU is not named. The rest is the familiar LK5 Pro: a 300 × 300 × 400mm build, 180mm/s, a braced triangular frame, TMC2209 drivers, runout and resume sensors and open-source firmware. The title says 95% pre-assembled while a bullet says 90%, and the footprint is given as about 20 × 20 × 15 inches, which looks too short for 400mm of Z. These notes rest on Longer's listing.
What stands out
- PLA, PETG, ABS and wood fill named
- Silicon carbide lattice glass bed
- Dual part-cooling fans
- 300 × 300 × 400mm, 180mm/s
Who it fits
Good fit for
Makers printing large PLA, PETG or wood-fill parts who want a big, open-source printer on a budget.
Who should skip it
Anyone planning regular ABS, ASA or TPU work, or who needs stated hot end and bed temperatures.
Verdict: A good big-bed match for PLA, PETG and wood fill; treat ABS as occasional and small.
LK5 Pro 3 B1 by material
PLA and wood fill
Easiest fit: glass bed plus dual fans give clean overhangs.
PETG
Glass bed suits it; slow the fans for layer bonding.
ABS (named)
Open frame and no listed temperatures make big ABS parts risky.
PTFE feed tube
Fine for common filaments; long high-heat jobs wear PTFE.
0.1mm precision claim, 180mm/s
Detail is fine; speed is modest.
Bed, fans and tube
Silicon carbide glass heats evenly and releases PLA and PETG parts once cool, without a flex plate. Dual fans help bridges and overhangs on PLA. The Teflon tube is the common budget design, and the listing gives no hot end temperature, so it is not a printer to plan nylon or carbon fiber work around. For ABS, a third-party enclosure would help, though none is mentioned.
Material tips for the LK5 Pro 3
Start PLA with full cooling and a clean, oil-free glass bed. For PETG, reduce fan speed and use a thin glue layer to stop it bonding too hard to glass. Print wood fill with a larger nozzle if you have one, since particles can clog small ones. If you try ABS, keep parts small and the room warm and draft-free.
Before ordering the LK5 Pro 3 B1
A materials check for this Longer listing.
Check before you buy
- Most of your LK5 Pro 3 prints are PLA, PETG or wood fill
- You will not run TPU or nylon on the LK5 Pro 3
- You can add an enclosure if the LK5 Pro 3 must print ABS
The product at a glance
Longer LK5 Pro Large-Format 3D Printer
Best for: Large PLA, PETG and wood-fill prints
- Build Volume
- 11.8 x 11.8x 15.7in. / 300*300*400mm
- Print Speed
- 180mm/s
- Printing Technology
- FDM
- Features
- Resume Printing, Open Source
- Target Audience
- Beginners
- Color
- Black
View on Amazon: Longer LK5 Pro Large-Format 3D Printer Affiliate link
Longer LK5 Pro 3 (LK5 Pro-B1): a 300 × 300 × 400mm open printer with a glass bed and dual fans, best with PLA, PETG and wood fill.
Pros
- Big build for PLA and PETG parts
- Even-heating glass bed
- Dual cooling fans
Cons
- No hot end or bed temperature listed
- Open frame limits ABS
- 90% vs 95% assembly claims
Good fit if
- You print large PLA or PETG parts
Skip if
- You need TPU, nylon or regular ABS
Verdict: A large, budget PLA and PETG workhorse.
Specifications side by side
| Spec | Longer LK5 Pro Large-Format 3D Printer |
|---|---|
| Build Volume | 11.8 x 11.8x 15.7in. / 300*300*400mm |
| Print Speed | 180mm/s |
| Printing Technology | FDM |
| Features | Resume Printing, Open Source |
| Target Audience | Beginners |
| Color | Black |
| Dimensions | 11.8 × 15.7 × 11.8 inches |
| Model | LK5 Pro-B1 |
Frequently asked questions
Can the Longer LK5 Pro 3 print PETG?
Yes, PETG is named alongside PLA, ABS and wood fill.
Can the LK5 Pro 3 print ABS well?
ABS is listed, but the printer is open and no temperatures are given, so large ABS parts may warp.
Does the LK5 Pro 3 B1 print TPU?
TPU is not named in this listing.
What bed does the LK5 Pro 3 use?
A silicon carbide lattice glass platform.
See also
- longer lk5 pro 3 bltouch open source review
- longer lk5 pro school home DIY review
- longer lk5 pro 3 first large printer review
- longer lk5 pro 3 3d printer review
- longer lk10 plus 3d printer review
- Longer LK5 Pro Large-Format 3D Printer Review (2026): A Spec-Based Look
- Longer LK10 CoreXY 3D Printer Review: Specs, Pros and Cons
- Longer LK10 Plus Large 3D Printer Review: Who It Fits and Who Should Skip It
- longer lk5 pro large format 3d printer review
- beelicious pro beelicious large airfryer review
