Longer LK5 Pro 3 Review for Tinkerers: BLTouch-Ready and Open Source (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Some buyers want a printer that works out of the box; others want one they can open up and improve. This LK5 Pro 3 listing (LGT-LK5PRO) speaks to the second group. The firmware is open source and you can edit the G-code it runs, and Longer provides for a BLTouch probe install so you can add automatic bed leveling later, though the probe itself is not in the box. Out of the box you get a dual blower kit for faster part cooling, a lattice glass bed, a 4.3-inch color touchscreen in place of a knob and small dot display, power-loss resume and a filament runout sensor. The frame is about 90% assembled and braced with diagonal rods into a triangle, around a 300 × 300 × 400mm build space. One conflict to note: the title promises TMC2209 drivers while the bullets describe TMC2208. Both are quiet drivers, but if you plan firmware changes the exact chip matters, so confirm it with the seller. Our read is limited to the listing's text.
What stands out
- Open-source firmware, editable G-code
- BLTouch install supported (probe not included)
- Dual blower cooling kit
- 300 × 300 × 400mm, 4.3in touchscreen
Who it fits
Good fit for
Hobbyists who enjoy upgrading a printer, adding a leveling probe and tuning firmware on a large build area.
Who should skip it
Buyers who want auto leveling in the box or a printer that never needs a screwdriver.
Verdict: A large, hackable base printer; budget for a BLTouch if you want automatic leveling.
LK5 Pro 3 for tinkerers
Open-source firmware
Edit settings and G-code to suit your setup.
BLTouch install provided
Add a probe later for automatic leveling; sold separately.
TMC2208 (bullets) vs TMC2209 (title)
Check the driver before planning firmware work.
Dual blower kit
Faster cooling for less stringing and warping.
300 × 300 × 400mm, lattice glass
Large build area with an easy-release bed.
Room to upgrade
Open firmware and a provided BLTouch path are the two reasons a tinkerer would pick this listing. Common next steps on printers like this are the probe, a flexible PEI sheet in place of glass, and firmware tuned to your hardware. The braced frame gives a solid base for those changes. The 4.3-inch touchscreen is a plus over the 2.8-inch screens Longer compares it with.
Running and modding the LK5 Pro 3
Until a probe is added, level the bed by hand before each long job. Back up the stock firmware before flashing anything, and note which driver chip your board has. The dual blowers help PLA overhangs; turn them down for PETG. Resume and runout sensing stay useful after any upgrade.
Before ordering for a modding project
A short check for tinkerers.
Check before you buy
- You will buy a BLTouch separately for the LK5 Pro 3
- You can confirm the LK5 Pro 3 driver chip with the seller
- You are comfortable flashing LK5 Pro 3 firmware
The product at a glance
Longer LK5 Pro Large FDM Printer
Best for: Tinkerers who want a big upgradable printer
- Build Volume
- 300*300*400mm
- Printing Technology
- FDM
- Features
- Resume Printing, Open Source
- Target Audience
- Beginners
- Color
- Black
- Dimensions
- 10 × 10 × 10 inches
View on Amazon: Longer LK5 Pro Large FDM Printer Affiliate link
Longer LK5 Pro 3 (LGT-LK5PRO): a large open-source printer with a BLTouch install path, dual blowers and a 4.3in touchscreen.
Pros
- Open firmware for tuning
- BLTouch upgrade path
- Dual blower cooling
Cons
- Probe not included
- Driver chip conflict in the listing
- Manual leveling out of the box
Good fit if
- You like upgrading printers
Skip if
- You want auto leveling with no extra purchase
Verdict: A hackable large printer for hands-on owners.
Specifications side by side
| Spec | Longer LK5 Pro Large FDM Printer |
|---|---|
| Build Volume | 300*300*400mm |
| Printing Technology | FDM |
| Features | Resume Printing, Open Source |
| Target Audience | Beginners |
| Color | Black |
| Dimensions | 10 × 10 × 10 inches |
| Size | LGT-LK5PRO |
| Model | LK5 Pro |
Frequently asked questions
Does the Longer LK5 Pro 3 include a BLTouch?
No. The listing says installation is provided for, but the probe is not in the package.
Is LK5 Pro 3 firmware open source?
Yes, and the listing invites G-code changes.
Which driver does this LK5 Pro 3 listing use?
The title says TMC2209 and the bullets say TMC2208; ask the seller.
What screen does the LK5 Pro 3 have?
A 4.3-inch full-color touchscreen.
Featured in
See also
- longer lk5 pro school home DIY review
- longer lk5 pro 3 first large printer review
- elegoo mercury x wash and cure station review
- longer lk5 pro 3 3d printer review
- longer lk10 plus 3d printer review
- Longer LK5 Pro Large-Format 3D Printer Review (2026): A Spec-Based Look
- Longer LK10 CoreXY 3D Printer Review: Specs, Pros and Cons
- Longer LK10 Plus Large 3D Printer Review: Who It Fits and Who Should Skip It
- longer lk5 pro large format 3d printer review
- beelicious pro beelicious large airfryer review
