AMOLEN Wood PLA 1.75mm 4x200g Review: Who It Fits and Who Should Skip It
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
AMOLEN's wood PLA set gives four 200g spools in walnut, cherry, bamboo and ebony for $29.99, so 800g of filament with real wood fibre mixed in. The aim is a printed surface that looks and feels like timber, suited to home decor, planters, figurines and craft pieces. Diameter is 1.75mm ±0.02mm, and AMOLEN gives a 180-220°C nozzle and 30-66°C bed. Transparent spools show how much is left, and each is vacuum-bagged. Two oddities appear: one bullet describes "silk PLA" with a shiny finish, copied from another product, and the shipping weight of 2.2 pounds is more than four 200g spools. The review relies on the seller's page.
What stands out
- Four wood tones from pale bamboo to ebony
- Real wood fibre for a timber feel
- Transparent spools show what remains
- Low nozzle range for easy printing
Who it fits
Good fit for
Crafters and decor makers who want a natural wood look on vases, frames, ornaments or models and like having light and dark tones to choose from.
Who should skip it
Skip it if you want strong mechanical parts or a large single-colour print over 200g, or if your nozzle is smaller than standard and prone to clogging with filled filaments.
Verdict: An easy way to try four wood finishes, with a couple of copy-paste errors in the listing.
What the four-tone wood set offers
4 × 200g: walnut, cherry, bamboo, ebony
Light to near-black wood shades in one order.
Real wood fibre in PLA
Matte, timber-like surface that can be sanded.
Nozzle 180-220°C, bed 30-66°C
Moderate temperatures most printers reach easily.
1.75mm ±0.02mm
Steady diameter for smooth feeding.
Spools and listing notes
The clear plastic spools let you see the colour and remaining length at a glance, and each one is vacuum-sealed. AMOLEN says winding is fully mechanical for smooth entry. The bullet about a shiny silk finish does not match a wood filament, so expect a matte, fibrous surface instead. The 2.2-pound weight figure likely reflects packaging or a copied value.
Getting a good wood look
Print within the 180-220°C window; slightly higher temperatures can deepen the colour, a common trick with wood-filled PLA. A 0.4mm or larger nozzle reduces the chance of fibres clogging. Light sanding and a wax or oil finish bring out the grain effect. Keep spools in their bags between uses.
Before ordering
Wood-filled PLA has a few quirks.
Check before you buy
- Your nozzle is 0.4mm or wider
- Decor or display parts, not load-bearing ones
- Each print stays under 200g
- You are fine with matte rather than glossy
The product at a glance
AMOLEN Wood PLA 1.75mm 4x200g Bundle
Best for: Wood-look decor and craft prints
- Material Type
- Wood PLA
- Filament Diameter
- 1.75mm
- Net Weight
- 200g x 4
- Dimensional Accuracy
- ±0.02mm
- Surface Finish
- Wood Texture
- Printing Technology
- FDM
View on Amazon: AMOLEN Wood PLA 1.75mm 4x200g Bundle Affiliate link
AMOLEN wood PLA set: four 200g spools (walnut, cherry, bamboo, ebony) of 1.75mm ±0.02mm wood-fibre PLA on clear spools, 180-220°C nozzle, 30-66°C bed, $29.99.
Pros
- Four wood shades to mix
- Clear spools show leftovers
- Modest print temperatures
Cons
- Listing text mentions silk by mistake
- Weight figure does not match 800g
- Small spools for big pieces
Good fit if
- You make wood-look decor
- You want light and dark tones
Skip if
- Your parts must carry real loads
- You print with a fine 0.2mm nozzle
Verdict: Fun wood-tone sampler for decor prints.
Specifications side by side
| Spec | AMOLEN Wood PLA 1.75mm 4x200g Bundle |
|---|---|
| Material Type | Wood PLA |
| Filament Diameter | 1.75mm |
| Net Weight | 200g x 4 |
| Dimensional Accuracy | ±0.02mm |
| Surface Finish | Wood Texture |
| Printing Technology | FDM |
| Compatible Material | PLA |
| Features | Wood Filled |
| Weight | 2.2 pounds |
| Size | 200g*4 |
| Color | Wood Walnut/Cherry Wood/Bamboo Wood/Ebony Black |
| Model | 3DSET0WD |
Frequently asked questions
Which wood tones are in the set?
Walnut, cherry, bamboo and ebony black, 200g each.
Is AMOLEN wood PLA shiny?
One listing line calls it silk and shiny, but that reads as copied text; wood PLA normally prints matte.
What temperatures does AMOLEN list?
Nozzle 180-220°C and bed 30-66°C.
Can I sand the prints?
The listing does not say, but wood-filled PLA is commonly sanded for a smoother grain.
Featured in
See also
- amolen tricolor silk pla filament review
- amolen marble pla filament review
- amolen rainbow tpu filament review
- AMOLEN Silk Dual Color PLA Filament (Blue/Green) Review (2026)
- AMOLEN Silk Rainbow PLA 1kg (Orange, Yellow, Blue, Pink) Review
- AMOLEN 95A Glow in the Dark TPU Filament (Green) Review (2026)
- best 3d printers for wood
- fadiadem wood printer stand desktop review
