AMOLEN Tricolor Silk PLA Filament Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
AMOLEN's tri-color silk PLA puts blue, green and orange side by side in one strand, so each face of a print shows a different colour as you turn it. A full 1kg roll of 1.75mm filament costs $25.99, and the silk finish gives a glossy surface without polishing. AMOLEN quotes ±0.02mm tolerance and says the PLA uses US-sourced raw material. It is pitched at arts, crafts and DIY, and called friendly to both beginners and experienced users. What is missing: any nozzle or bed temperature. The spec table's 1.97 × 0.79in dimensions also cannot be a 1kg spool. This assessment uses the product listing only.
What stands out
- Three colours visible from different angles
- Gloss finish straight off the plate
- Full kilo rather than mini spools
- ±0.02mm tolerance
Who it fits
Good fit for
Hobbyists making vases, figurines, ornaments and gifts who want a bold multi-colour effect from a single spool and no AMS.
Who should skip it
Skip it if you want a single solid colour, need temperature guidance on the listing, or mainly print functional parts, since the listing aims it at crafts and decor.
Verdict: Striking colour effect at a fair price; bring your own print settings.
Silk tri-color specs
Blue / green / orange in one strand
The colour you see depends on viewing angle, not on layer height.
Silk gloss finish
Shiny, smooth walls that suit curved models.
1kg, 1.75mm ±0.02mm
Plenty for several medium-sized decor pieces.
No temperatures listed
Start from your slicer's silk PLA profile.
How the effect works
Tri-color silk PLA is extruded with three colours bonded along the strand, so the shade on each side of a wall depends on how the filament was oriented as it was laid down. Rounded shapes such as vases and busts show the blend best. AMOLEN promises no bubbles, jams or warping and smooth feeding. The odd 1.97 × 0.79in spec figure is likely a data error.
Practical printing
Because no settings are given, begin with a typical silk PLA profile and print a small test to check gloss and colour split. Slower outer walls tend to improve shine. Spiral vase mode makes the most of a single continuous wall. Store the roll sealed after use.
Quick checks
Make sure this effect matches your plans.
Check before you buy
- You like blue, green and orange together
- Decorative models rather than load-bearing parts
- You can dial in temperatures yourself
- A full 1kg roll suits your usage
The product at a glance
AMOLEN Tricolor Silk PLA Filament (1.75mm, 1kg)
Best for: Multi-colour decorative prints from one spool
- Material Type
- PLA
- Filament Diameter
- 1.75mm
- Net Weight
- 1kg
- Dimensional Accuracy
- +/- 0.02 mm
- Surface Finish
- Silk
- Printing Technology
- FDM
View on Amazon: AMOLEN Tricolor Silk PLA Filament (1.75mm, 1kg) Affiliate link
AMOLEN tri-color silk PLA in blue, green and orange, 1kg of 1.75mm ±0.02mm, glossy finish with colour changing by viewing angle; no temperatures listed, $25.99.
Pros
- Eye-catching three-way colour
- Glossy without post-processing
- Full 1kg roll
Cons
- No print settings given
- Spec dimensions look wrong
- Pitched at crafts, not technical parts
Good fit if
- You print vases or ornaments
- You want multi-colour without an AMS
Skip if
- You need a plain single colour
- You print tough mechanical parts
Verdict: Showy tri-color silk for decorative work.
Specifications side by side
| Spec | AMOLEN Tricolor Silk PLA Filament (1.75mm, 1kg) |
|---|---|
| Material Type | PLA |
| Filament Diameter | 1.75mm |
| Net Weight | 1kg |
| Dimensional Accuracy | +/- 0.02 mm |
| Surface Finish | Silk |
| Printing Technology | FDM |
| Color Printing | Multi-Color |
| Compatible Material | PLA |
| Size | 1.75Mm |
| Finish | Silk |
| Dimensions | 1.97 × 1.97 × 0.79 inches |
| Weight | 2.2 pounds |
| Color | Blue Green Orange |
| Model | 3DSKBGOG |
Frequently asked questions
How do the three colours show up?
Each side of the printed model shows a different colour, so the look changes as you rotate it.
Does AMOLEN list print temperatures for this roll?
No, so use a standard silk PLA profile as the starting point.
Does it need polishing?
No. The listing says the silk gloss comes straight off the printer.
How much filament is included?
A single 1kg roll of 1.75mm filament.
Featured in
See also
- amolen marble pla filament review
- amolen rainbow tpu filament review
- koyofei bambu p1 x1 silicone socks review
- amolen wood pla filament review
- AMOLEN Silk Dual Color PLA Filament (Blue/Green) Review (2026)
- AMOLEN Silk Rainbow PLA 1kg (Orange, Yellow, Blue, Pink) Review
- AMOLEN 95A Glow in the Dark TPU Filament (Green) Review (2026)
- geeetech 3d printer kids review
- unxuey 50pcs 3d printer heatsink review
