AMOLEN Transparent Rainbow TPU 95A Filament Review: Who It Fits and Who Should Skip It
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This AMOLEN TPU combines flexibility with a rainbow look: a transparent 95A filament whose colour changes along the spool, sold as a full 1kg roll for $25.64. AMOLEN says it stretches to three times its length and suits arts, crafts and DIY pieces that need bounce, such as bracelets, phone cases or toys. Diameter is held to ±0.02mm with CCD measurement. Settings are a 190-220°C nozzle, an optional 0-60°C bed and a 0.15mm layer height tip. The listing says it is for short-path (direct-drive) extruders and supports high speed, but gives no speed figure. It also advises drying before use. Information here comes from the listing alone.
What stands out
- Clear TPU with a rainbow gradient
- Stretches up to three times its length
- Bed heating optional
- Full kilo at a TPU-friendly price
Who it fits
Good fit for
Crafters with a direct-drive printer who want colourful, see-through flexible prints like wristbands, cases, fidget toys or lamp covers.
Who should skip it
Skip it if your printer uses a long Bowden tube, or if you need a stated print speed or opaque colours.
Verdict: A playful, good-value flexible filament for direct-drive machines.
Rainbow TPU specs explained
Shore 95A, 3× elongation
Soft and stretchy, yet stiff enough to print reliably.
Nozzle 190-220°C, bed optional 0-60°C
Low temperatures; a heated bed helps but is not required.
Direct-drive (short extrusion path)
Flexible filament buckles in long Bowden tubes.
Transparent rainbow, 1kg
Colours shift along the spool, so long prints show a gradient.
Material and winding
AMOLEN uses an automated winding machine plus manual inspection and says rolls are dried and vacuum sealed. A fixed hole on the spool holds the loose end to stop tangles after use. The spec field reads "Vibrant-tpu 95a Transparent". The listing's 1.97 × 0.79in dimensions cannot describe a 1kg roll. No speed figure backs the high-speed claim.
Printing tips
Dry the spool first, as AMOLEN advises, then print around 200-210°C with 0.15mm layers. Keep speeds modest at first and minimise retraction. Clear TPU looks best with fewer walls and little infill so light passes through. After printing, thread the end through the spool hole and reseal the bag.
Printer compatibility
Flexible filament depends on your extruder.
Check before you buy
- Direct-drive or short-path extruder
- A way to dry filament before printing
- Projects that benefit from flex and clarity
- Patience for slower first prints
The product at a glance
AMOLEN 1.75mm Transparent Rainbow 95A TPU (1kg)
Best for: See-through flexible craft prints
- Material Type
- TPU
- Filament Diameter
- 1.75mm
- Net Weight
- 1kg
- Dimensional Accuracy
- +/- 0.02mm
- Surface Finish
- Glossy
- Shore Hardness
- 95A
View on Amazon: AMOLEN 1.75mm Transparent Rainbow 95A TPU (1kg) Affiliate link
AMOLEN transparent rainbow TPU 95A, 1kg of 1.75mm ±0.02mm, stretches 3×; 190-220°C nozzle, optional 0-60°C bed, for direct-drive printers, drying advised, $25.64.
Pros
- Colour-changing clear flex
- Prints on an unheated bed
- Full 1kg roll
Cons
- Direct drive needed
- Speed claim lacks a number
- Spec dimensions are wrong
Good fit if
- You make stretchy bands or cases
- Your extruder sits on the print head
Skip if
- You run a long Bowden tube
- You want opaque solid colours
Verdict: Colourful, flexible fun for direct-drive printers.
Specifications side by side
| Spec | AMOLEN 1.75mm Transparent Rainbow 95A TPU (1kg) |
|---|---|
| Material Type | TPU |
| Filament Diameter | 1.75mm |
| Net Weight | 1kg |
| Dimensional Accuracy | +/- 0.02mm |
| Surface Finish | Glossy |
| Shore Hardness | 95A |
| Compatible Material | TPU |
| Features | High Speed |
| Size | 1.75Mm |
| Finish | Transparent |
| Color Effect | Rainbow |
| Dimensions | 1.97 × 1.97 × 0.79 inches |
| Weight | 2.2 pounds |
| Color | Vibrant-tpu 95a Transparent |
| Model | 3DTPURB |
Frequently asked questions
Will this TPU work with a Bowden printer?
AMOLEN lists short-range extrusion printers, meaning direct drive; long Bowden setups often struggle.
Do I need a heated bed for rainbow TPU?
No. The bed is optional, with 0-60°C listed.
How stretchy is it?
AMOLEN says it can stretch three times its original length.
Is there a top speed for AMOLEN rainbow TPU?
The listing claims high-speed support but gives no figure.
Featured in
See also
- koyofei bambu p1 x1 silicone socks review
- koyofei 5pcs screen protector LCD resin 3d printers review
- koyofei fep release film review
- amolen wood pla filament review
- amolen tricolor silk pla filament review
- AMOLEN Marble PLA Filament (White Stone) Review: Specs, Pros and Cons
- AMOLEN Silk Dual Color PLA Filament (Blue/Green) Review (2026)
- AMOLEN Silk Rainbow PLA 1kg (Orange, Yellow, Blue, Pink) Review
- tkid 3d printer kids review
- unxuey 50pcs 3d printer heatsink review
