AMOLEN 95A Glow in the Dark TPU Filament (Green) Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
AMOLEN's 95A TPU in Glow in the Dark Green combines two things that rarely come together: a flexible filament and a luminous one. That pairing is why you would buy it: phone bumpers, bracelets, pet tags, zipper pulls and soft night markers that bend and also glow after a charge. The glow is strongest after UV light; AMOLEN suggests UV lamps. In daylight the color is green rather than the usual pale white of glow filaments. It has a shore hardness of 95A and AMOLEN says it stretches to three times its length. Settings are given: 190-220°C at the nozzle, an optional 0-60°C bed and 0.15mm layers, with drying advised before use. Tolerance is ±0.02mm on a 1kg 1.75mm spool. AMOLEN pitches it at short-path extruders, so a direct drive printer is the right match. This look relies on AMOLEN's listing and its stated settings rather than our own prints.
What stands out
- 95A TPU, stretches to 3x length
- Glows green, charges best under UV
- 1.75mm ±0.02mm, 1kg
- 190-220°C, bed 0-60°C, 0.15mm layers
- Dry before use
Who it fits
Good fit for
Direct drive printer owners who want soft, bendable parts that glow: bumpers, wearables, pet tags and night markers.
Who should skip it
Bowden printers, which struggle with soft TPU, and anyone wanting a rigid glow PLA for display pieces.
Verdict: A flexible TPU that also glows, for bendy night-visible prints.
AMOLEN glow green 95A TPU specs
Shore 95A
Firm-flexible, like a phone bumper.
3x stretch
AMOLEN's figure for elongation.
Green glow, UV-charged
Brightest after a UV lamp.
190-220°C, 0-60°C bed
Bed heat is optional per AMOLEN.
±0.02mm
Consistent diameter helps flexible feeding.
What the AMOLEN glow TPU is good for
Flexible parts that need to be found or seen in the dark: a bumper on a flashlight, a tag on a collar, a grip on a zipper or a soft marker on a step. The green daytime color keeps prints from looking chalky. AMOLEN says the raw TPU comes from the USA and the spool is vacuum sealed after drying.
Printing AMOLEN green glow TPU
Use a direct drive extruder, print slowly and keep retraction short; AMOLEN gives no speed figure. Stay within 190-220°C and use 0.15mm layers as suggested. Dry the spool first and keep it sealed afterward. Feed the end through the spool's fixing hole to stop it unwinding.
Before buying AMOLEN glow TPU
Checks.
Check before you buy
- Your printer has a direct drive for AMOLEN TPU
- You have a UV lamp to charge the AMOLEN glow
- You can dry the AMOLEN spool before printing
The product at a glance
AMOLEN 95A TPU Glow Filament 1.75mm
Best for: Glowing flexible parts
- Material Type
- TPU
- Filament Diameter
- 1.75mm
- Net Weight
- 1kg
- Dimensional Accuracy
- ±0.02mm
- Shore Hardness
- 95A
- Features
- Glow in the Dark
View on Amazon: AMOLEN 95A TPU Glow Filament 1.75mm Affiliate link
AMOLEN 95A TPU, Glow in the Dark Green: flexible, 3x stretch, ±0.02mm, 190-220°C, optional 0-60°C bed, 0.15mm layers; best charged under UV.
Pros
- Flexible and glowing
- Green in daylight
- Full temps and layer height
Cons
- Needs direct drive
- No speed figure
- Glow strongest with a UV lamp
Good fit if
- You want bendable parts that glow at night
Skip if
- Your printer is Bowden-fed for AMOLEN TPU
Verdict: A rare flexible glow filament for night-visible soft parts.
Specifications side by side
| Spec | AMOLEN 95A TPU Glow Filament 1.75mm |
|---|---|
| Material Type | TPU |
| Filament Diameter | 1.75mm |
| Net Weight | 1kg |
| Dimensional Accuracy | ±0.02mm |
| Shore Hardness | 95A |
| Compatible Material | TPU |
| Features | Glow in the Dark |
| Size | 1KG |
| Weight | 2.2 pounds |
| Color | Green-tpu 95a Glow |
| Model | #1-3DTPUGIDGN |
Frequently asked questions
What hardness is the AMOLEN glow TPU?
Shore 95A.
How do you make AMOLEN glow TPU glow brightest?
Charge it under a UV lamp, as AMOLEN suggests.
What temperature does AMOLEN glow green TPU need?
190-220°C, with an optional 0-60°C bed.
Does AMOLEN give a print speed for this glow TPU?
No speed is listed; print slowly as with most TPU.
See also
- gizmo dorks tpu filament 200g red review
- prusament pla galaxy black filament review
- sovol silk rainbow pla purple review
- amolen wood pla filament review
- amolen tricolor silk pla filament review
- AMOLEN Marble PLA Filament (White Stone) Review: Specs, Pros and Cons
- AMOLEN Transparent Rainbow TPU 95A Filament Review: Who It Fits and Who Should Skip It
- AMOLEN Silk Dual Color PLA Filament (Blue/Green) Review (2026)
- fungdo LCD 3d printer review
- unxuey 50pcs 3d printer heatsink review
