As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

Entina 4-Color PLA Filament Bundle (4 x 200g) Review (2026): A Spec-Based Look

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

Entina's bundle packs four 200g spools of 1.75mm PLA in bright green, orange, sapphire blue and pink, sized for the Tina2 family of mini printers. At $35.99 for 800g it costs about $45 per kilo, well above a standard 1kg roll, so you pay for the small spools and colour variety. The seller quotes ±0.02mm tolerance, a 190-210°C nozzle and a 0-50°C bed, which suits small printers with modest or no heated beds. Each spool comes in its own sealed vacuum bag after pre-drying. One listing quirk: the spec table's 7.05oz weight matches a single spool, not the set. We relied on the product page for all of this.

What stands out

  • Four bright colours on Tina2-sized spools
  • Low print temperatures for mini printers
  • Bed can run cold or up to 50°C
  • Separate vacuum bag per spool

Who it fits

Good fit for

Tina2 and Tina2C owners, kids' printing setups and anyone with a small spool holder who wants a few cheerful colours instead of one big roll.

Who should skip it

Skip it if you print a lot or on a full-size machine; a 1kg roll costs far less per gram.

Verdict: Convenient colour pack for mini printers, priced for convenience rather than value.

Specs in context

4 × 200g (0.44lb each)

Light spools that fit compact holders on mini printers.

Nozzle 190-210°C, bed 0-50°C

Works on printers with an unheated or lightly heated bed.

1.75mm ±0.02mm

Consistent diameter for steady feeding through small extruders.

Corn-based PLA

Low shrinkage and good layer bonding per the seller.

Spools and packing

Each 200g spool is sealed separately, so opening the orange does not expose the blue to room air. The listing claims no tangles and no bubbles, and says the PLA was dried for a full day before packing. Spool dimensions are not given, but the title ties the set to the Tina2. The seller also says it works with 3D pens, which use the same 1.75mm diameter.

Printing with small spools

Start around 200°C, the middle of Entina's range, and use a cool or lightly warm bed. On a mini printer, 200g covers many keychains and toys, but check the slicer's gram estimate before longer jobs. Keep unopened colours in their bags until needed. Leftover lengths are handy for 3D pen touch-ups.

Is this pack right for you?

It suits small machines more than big ones.

Check before you buy

  • Your printer or holder takes 200g spools
  • You value colour variety over price per gram
  • These four colours suit your projects
  • Your prints are small enough for 200g

The product at a glance

Entina 4-Color PLA Filament 1.75mm

Best for: Tina2 owners wanting four bright PLA colours

Material Type
PLA
Filament Diameter
1.75mm
Net Weight
200g
Dimensional Accuracy
+/- 0.02mm
Weight
7.05 ounces

View on Amazon: Entina 4-Color PLA Filament 1.75mm Affiliate link

Four 200g spools of 1.75mm ±0.02mm PLA (green, orange, sapphire blue, pink) for the Entina Tina2 and other small printers, 190-210°C nozzle, 0-50°C bed, each vacuum-sealed, $35.99.

Pros

  • Sized for Tina2 spool holders
  • Prints on a cold or warm bed
  • Each colour sealed on its own

Cons

  • About $45 per kilo
  • Spec weight shows one spool only
  • Fixed colour mix

Good fit if

  • You own a Tina2 or similar mini printer
  • You like several bright colours on hand

Skip if

  • You buy filament by price per kilo
  • You run a full-size printer

Verdict: Handy colour set for mini printers, not a bargain.

Specifications side by side

Spec Entina 4-Color PLA Filament 1.75mm
Material Type PLA
Filament Diameter 1.75mm
Net Weight 200g
Dimensional Accuracy +/- 0.02mm
Compatible Material PLA
Weight 7.05 ounces
Color Bright Green/Orange/Sapphire Blue/Pink
Model F-05

Frequently asked questions

Which colours are included?

Bright green, orange, sapphire blue and pink, 200g each.

Does it need a heated bed?

No. Entina lists a 0-50°C bed range, so an unheated plate is within spec.

Will it work outside Entina printers?

The seller says most 1.75mm FDM printers and 3D pens can use it.

Why does the listing show 7.05oz?

That matches one 200g spool; the full set is 800g.

See also