USFRLCQTP Phrozen Sonic Mini 8K/8K S Resin Vat Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
USFRLCQTP sells this 7.1-inch vat as a direct replacement for the tank on Phrozen's Sonic Mini 8K and Sonic Mini 8K S. It is pitched at owners whose original vat is cracked, leaking or worn, or who want a second vat for batch work such as miniatures and jewelry. The seller says the frame is hard and chemical-resistant, the edges are sealed to keep resin off the LCD below, and the mounting size matches the factory vat so it snaps in without trimming. What is missing is the detail that decides vat quality: the release film type (FEP, nFEP or ACF), the frame material and the resin capacity are not given. The price is also high for a third-party vat, so if your only problem is a scratched film, a pre-framed FEP pack for the same printers costs far less. Our view rests on USFRLCQTP's listing text.
What stands out
- 7.1in, Sonic Mini 8K and 8K S fit
- Sealed edges to protect the LCD
- Factory mounting size, no trimming
Who it fits
Good fit for
Sonic Mini 8K or 8K S owners with a cracked or leaking vat frame, or who want a spare vat loaded with a second resin.
Who should skip it
Owners whose vat frame is fine and only the film is worn; a replacement film costs a fraction of this.
Verdict: A drop-in spare vat for the Sonic Mini 8K line; film type and capacity are unstated.
USFRLCQTP vat specs
7.1in vat
Sized to the Sonic Mini 8K and 8K S.
Chemical-resistant frame
Material not named.
Edge seal
Meant to stop leaks onto the screen.
Factory mount dimensions
Snap-on fit, per the seller.
Film type, capacity
Not stated.
Whole vat or just a film
A resin vat is a frame with a clear release film stretched across the bottom. Most wear happens in the film: scratches, clouding or a puncture. Phrozen's own 7.1in vat with pre-installed FEP is the first choice when stock allows. Choose this USFRLCQTP vat if the frame itself is damaged or you want two vats in rotation; choose a pre-framed FEP pack for the Sonic Mini 8K if the frame is sound and only the film needs replacing.
Running a spare Sonic Mini vat
A second vat lets you leave one resin sitting covered while printing another, or keep a clean vat ready while the other is filtered. Check the film for tension and clarity before the first print, since the listing does not describe it, and wipe the LCD protector before seating the vat.
Before ordering the USFRLCQTP vat
Confirm the model and ask about the film.
Check before you buy
- Your printer is a Sonic Mini 8K or Sonic Mini 8K S
- The USFRLCQTP vat frame, not just the film, needs replacing
- The seller confirms the USFRLCQTP film type
The product at a glance
USFRLCQTP 7.1-Inch Resin Tank
Best for: Replacing a damaged Sonic Mini 8K vat
- Resolution
- 8K
- Dimensions
- 0.39 × 0.39 × 0.39 inches
View on Amazon: USFRLCQTP 7.1-Inch Resin Tank Affiliate link
USFRLCQTP 7.1in replacement vat for Phrozen Sonic Mini 8K and 8K S, with sealed edges and a factory-size mount.
Pros
- Direct fit for two Sonic Mini models
- Edge seal protects the screen
- Good as a second vat
Cons
- Film type not stated
- High price for a third-party vat
Good fit if
- Your vat frame is cracked
- You run two resins
Skip if
- Only the film is worn
Verdict: A pricey but direct spare vat for Sonic Mini 8K owners.
Specifications side by side
| Spec | USFRLCQTP 7.1-Inch Resin Tank |
|---|---|
| Resolution | 8K |
| Dimensions | 0.39 × 0.39 × 0.39 inches |
| Size | One Size |
| Color | One Color |
| Model | USFRLCQTP |
Frequently asked questions
Does the USFRLCQTP vat fit the Sonic Mini 8K S?
Yes, the listing names both the Sonic Mini 8K and 8K S.
What film does the USFRLCQTP vat use?
The listing does not say whether it is FEP, nFEP or ACF.
How much resin does the USFRLCQTP vat hold?
No capacity is given.
Do I need to trim anything to fit the USFRLCQTP vat?
The seller says it matches the factory mount and snaps in without trimming.
