As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

SamLng Anycubic ACE Pro / Kobra 3 Combo Belt 2-Pack Review (2026)

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

SamLng's pack holds two replacement belts that the seller says are made for the Anycubic ACE Pro and Kobra 3 Combo. The appeal is simple: a spare pair on the shelf for when a belt stretches, frays or loses teeth. The trouble is the listing itself. Most of its bullets are generic praise (reliable, durable, long service life), and it never states the belt length, width, tooth pitch or material, nor which axis or part of the machine the belts are for. Its dimension fields show 0.39 inches for every measurement, which is a placeholder, not a belt size. The seller also asks buyers to check their model number, which is hard to do without numbers to compare. If you know your belt's length and pitch and can confirm them with SamLng first, a two-pack is handy. Otherwise, a set that publishes its sizes is the safer order. This review is based on SamLng's listing alone.

What stands out

  • Two belts per pack
  • Named for ACE Pro and Kobra 3 Combo

Who it fits

Good fit for

Kobra 3 Combo owners who already know their belt's length and pitch and want a cheap spare pair.

Who should skip it

Anyone who needs stated belt dimensions or wants to know which axis these belts replace before ordering.

Verdict: A possible spare pair for the Kobra 3 Combo, but the listing gives no belt sizes to check.

SamLng belt pack details

2 belts

One to fit, one spare, or both axes if they match.

ACE Pro / Kobra 3 Combo

The only models named.

Length, width, pitch, material

Not given.

0.39in in every size field

Placeholder values, not belt dimensions.

What to compare before fitting

Printer belts differ in three ways that decide fit: tooth profile and pitch, belt width, and either the closed-loop or cut length. SamLng gives none of these. Measure the worn belt, or check Anycubic's parts page for your model, then ask the seller to confirm. Choose the SamLng pack only after that match; choose a set that prints its length and width on the listing if you would rather not ask.

When to change a Kobra 3 belt

Signs of a worn belt include layer shift, ringing that tension changes do not fix, missing teeth, or fraying at the edges. When fitting the new belt, set tension as Anycubic describes for your printer and recheck after the first few prints, since new belts settle.

Before ordering SamLng belts

Fill the gaps the listing leaves.

Check before you buy

  • You know the length and pitch of your Kobra 3 belt
  • SamLng confirms which part the belts fit
  • Your Anycubic setup is an ACE Pro or Kobra 3 Combo

The product at a glance

SamLng 2-Pack Belt for Anycubic ACE Pro/Kobra

Best for: Kobra 3 Combo spare belts

Dimensions
0.39 × 0.39 × 0.39 inches

View on Amazon: SamLng 2-Pack Belt for Anycubic ACE Pro/Kobra Affiliate link

SamLng two-belt pack named for the Anycubic ACE Pro and Kobra 3 Combo; length, width and pitch are not stated.

Pros

  • Two belts per pack
  • Names a specific printer

Cons

  • No belt dimensions
  • Generic listing text
  • Placeholder size fields

Good fit if

  • You know your belt specs
  • You want a spare pair

Skip if

  • You need stated sizes

Verdict: Order only once the seller confirms the size.

Specifications side by side

Spec SamLng 2-Pack Belt for Anycubic ACE Pro/Kobra
Dimensions 0.39 × 0.39 × 0.39 inches
Size One Size
Color One Color
Model SamLng

Frequently asked questions

How long are the SamLng ACE Pro belts?

The listing gives no length; its size fields all read 0.39 inches, which is a placeholder.

How many belts are in the SamLng pack?

Two.

Which Anycubic models do SamLng belts fit?

SamLng names the ACE Pro and Kobra 3 Combo.

Are SamLng belts GT2?

The listing does not say; confirm tooth profile with the seller.

See also