Hemulac Bambu Lab P1P/P1S Hardened Steel Hotend Kit Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Hemulac's kit is a complete hotend assembly for the Bambu Lab P1P and P1S: a nickel-plated heating block with a ceramic heater, thermistor, cooling fan and an SKD11 hardened steel nozzle, plus a hex key and screwdriver. That makes it a one-piece fix for a hotend that is clogged beyond rescue or has a failed heater or thermistor, and the hardened nozzle suits carbon and glass-fiber filled filaments. Two parts of the listing need care. First, it rates the assembly to 550°C; that reads as a heater component rating, because the printer's firmware sets the real ceiling and no hobby filament needs anything near it. Second, it names 0.2mm, 0.4mm and 0.6mm nozzles as 'options' and says you can switch sizes, but it never states whether all three come in the box. For a P1-series owner wanting a cheap spare hotend that also handles CF filament, it fits the need. Everything here traces back to Hemulac's listing.
What stands out
- Complete P1P/P1S hotend assembly
- SKD11 hardened steel nozzle
- Ceramic heater, thermistor and fan included
- Nozzle sizes 0.2, 0.4 and 0.6mm named
Who it fits
Good fit for
P1P or P1S owners with a dead heater, thermistor or badly clogged hotend, or who want a hardened spare for carbon-filled filament.
Who should skip it
X1 or A1 owners, and anyone who wants Bambu's own hotend with its known fit and support.
Verdict: A low-cost full hotend for the P1 series; ignore the 550°C figure and confirm the nozzle count.
Hemulac P1 hotend specs, decoded
Fits Bambu Lab P1P and P1S
The only printers the listing names.
SKD11 hardened steel nozzle
Resists wear from CF and GF filled filaments.
Ceramic heater, nickel-plated block
Fast heat-up and a block that resists sticking.
Rated to 550°C
A component rating; the printer limits real temperatures.
0.2 / 0.4 / 0.6mm
Named as options; quantity in the box unclear.
Fan, thermistor, hex key, screwdriver
Everything for a full swap.
What sits in the Hemulac assembly
Rather than a bare nozzle, this is the whole hot end: block, heater, temperature sensor and the fan that keeps the cold side cool. Hemulac says the nozzle-to-block joint is machined to seal tightly against leaks and loosening, and that the fan and heat path reduce heat creep. Hardened steel conducts heat less readily than brass, which matters little at normal PLA speeds but is worth knowing if you push flow rates.
Swapping it in and choosing nozzles
On a P1P or P1S the hotend comes out after removing the front cover and unplugging its cables; the included hex key and screwdriver cover the fasteners. Choose this Hemulac assembly if the heater or thermistor has failed, since it replaces both at once; choose a single hardened nozzle instead if your hotend works and you only want abrasive-filament wear resistance.
Before ordering the Hemulac hotend
Settle fit and contents with the seller.
Check before you buy
- Your printer is a Bambu P1P or P1S
- The Hemulac seller confirms which nozzle sizes ship
- You are comfortable unplugging Hemulac hotend cables
The product at a glance
Hemulac Bambu Lab P1P/P1S Hardened Steel Hotend Kit
Best for: P1P/P1S hotend replacement
- Primary Material
- Hardened SKD11 steel
- Maximum Temperature
- 550°C
- Nozzle Diameter
- 0.2mm, 0.4mm, 0.6mm
View on Amazon: Hemulac Bambu Lab P1P/P1S Hardened Steel Hotend Kit Affiliate link
Hemulac complete hotend for Bambu P1P/P1S: SKD11 hardened nozzle, ceramic heater, thermistor, fan and tools.
Pros
- Full assembly in one part
- Hardened nozzle for CF/GF
- Tools included
Cons
- 550°C claim is not meaningful
- Nozzle count unclear
Good fit if
- Your P1S heater has failed
- You print CF filament
Skip if
- You own an X1 or A1
Verdict: A cheap, complete P1-series hotend spare.
Specifications side by side
| Spec | Hemulac Bambu Lab P1P/P1S Hardened Steel Hotend Kit |
|---|---|
| Primary Material | Hardened SKD11 steel |
| Maximum Temperature | 550°C |
| Nozzle Diameter | 0.2mm, 0.4mm, 0.6mm |
| Nozzle Material | Hardened Steel |
| Size | P1P P1S Hotend Complete Kit |
| Color | Grey |
| Model | 1 |
Frequently asked questions
Does the Hemulac hotend fit the Bambu X1C?
The listing names only the P1P and P1S.
Can the Hemulac P1 hotend really reach 550°C?
That is Hemulac's stated rating; the printer's firmware decides the actual maximum, and filaments do not need it.
Are 0.2, 0.4 and 0.6mm nozzles all included with the Hemulac kit?
The listing calls them options and does not say how many come in the box.
What steel is the Hemulac nozzle made of?
SKD11 hardened steel, aimed at carbon and glass fiber filled filaments.
Featured in
See also
- samlng anycubic ace pro kobra 3 combo belt 2 pack review
- ecapphprm dual drive extruder gear review
- elegoo plant based standard resin black 2000g review
- best 3d printers under 200
- best 3d printers under 300
- Best 3D Printers Under $500 in 2026: 7 Picks Ranked by Specs
- Best 3D Printers Under $1000: 6 Spec-Based Picks
- 6 Best 3D Printers Under $1500, Compared
- wilson luxe golf complete golf review
- joolz day3 complete set review
