As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

Toksen3D Silk Green PLA+ Filament (1.75mm, 1kg) Review

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

Toksen3D's Silk Green is a 1kg spool of 1.75mm silk filament. The listing title calls it PLA, while the bullets call it PLA+, so expect a silk PLA blend rather than a separate material. The useful part is that Toksen3D gives real settings: 220-230°C at the nozzle, 50-60°C on the bed and 50-300mm/s, plus roughly 330m of filament (330±20m) on the spool. A glossy green is a natural fit for planters, leaves and garden figures, Easter and St. Patrick's Day pieces, and dragon or reptile models where the sheen reads as scales. Tolerance is ±0.03mm, a little looser than the ±0.02mm many spools quote. One bullet also mentions 50-350mm/s on Bambu Lab printers, which does not match the 50-300mm/s in the settings bullet; the lower figure is the safer limit. The title names AMS, but no bullet confirms how the spool fits it. This review works from Toksen3D's spec fields and bullets, with no prints of our own.

What stands out

  • Silk PLA+ blend, green, 1kg
  • About 330m (330±20m)
  • 1.75mm ±0.03mm
  • 220-230°C nozzle / 50-60°C bed
  • 50-300mm/s (one bullet says 350)

Who it fits

Good fit for

Makers of plants, leaves, scale-textured creatures and spring or holiday decor who want a glossy green with stated settings.

Who should skip it

Anyone printing strong functional parts, or who needs the tightest ±0.02mm diameter control.

Verdict: A glossy green silk spool with full settings listed; good for decor, not for load-bearing parts.

Toksen3D Silk Green specs

Silk green PLA+

Glossy finish; the title says PLA, the bullets PLA+.

330±20m per 1kg

Spool length stated, handy for slicer estimates.

±0.03mm

Slightly looser than ±0.02mm spools.

220-230°C / 50-60°C

Nozzle and bed range from Toksen3D.

50-300mm/s

Speed range; a second bullet claims up to 350mm/s.

What green silk is good for

Silk green looks best on organic curves: succulents in a pot, vines, frog and lizard figures, dragon scales and egg shapes, where the sheen shifts across the surface. On flat, boxy prints the shine shows layer lines more than it hides them. Toksen3D also pitches the spool for holiday decor, and green covers spring and St. Patrick's Day themes well. As with other silk blends, gloss comes at some cost in strength, so brackets and clips belong on plain PLA or PETG.

Printing Toksen3D Silk Green

Start in the middle of the 220-230°C window with the bed at 50-60°C, and keep outer walls slower than the 300mm/s ceiling if gloss matters more than time; silk finishes usually lose some shine at top speed. The ±0.03mm tolerance is fine for normal printers, but calibrate flow once when you switch from a ±0.02mm spool. The title mentions AMS, so check spool width and rim on your own feeder before loading a full run.

Before buying Toksen3D Silk Green

Checks.

Check before you buy

  • You want a glossy green for Toksen3D silk decor prints
  • Your hotend reaches the 220-230°C Toksen3D range
  • Toksen3D's ±0.03mm tolerance is fine for your printer
  • Your silk green prints are display pieces

The product at a glance

Toksen3D Silk Green PLA 1.75mm 1kg

Best for: Green silk decor

Material Type
PLA+
Filament Diameter
1.75mm
Net Weight
1kg
Max Print Speed
350mm/s
Dimensional Accuracy
+/-0.03mm
Surface Finish
Silk

View on Amazon: Toksen3D Silk Green PLA 1.75mm 1kg Affiliate link

Toksen3D Silk Green PLA+ 1kg: about 330m, ±0.03mm, 220-230°C nozzle, 50-60°C bed, 50-300mm/s; title says PLA, bullets PLA+.

Pros

  • Full nozzle, bed and speed settings
  • Spool length stated
  • Glossy green suits plant and creature prints

Cons

  • ±0.03mm, looser than many spools
  • Speed claims differ between bullets
  • Silk finish trades away strength

Good fit if

  • You print green silk plants or creatures

Skip if

  • You need strong Toksen3D parts

Verdict: A glossy green silk spool with stated settings.

Specifications side by side

Spec Toksen3D Silk Green PLA 1.75mm 1kg
Material Type PLA+
Filament Diameter 1.75mm
Net Weight 1kg
Max Print Speed 350mm/s
Dimensional Accuracy +/-0.03mm
Surface Finish Silk
Printing Technology FDM
Compatible Material PLA
Size 1KG
Finish Silk
Weight 2.2 pounds
Color J_pla-14 Silk Green

Frequently asked questions

What temperature does Toksen3D Silk Green need?

220-230°C at the nozzle and 50-60°C on the bed, per Toksen3D.

How much filament is on the Toksen3D Silk Green spool?

About 330m, given as 330±20m on a 1kg spool.

Is Toksen3D Silk Green PLA or PLA+?

The title says PLA and the bullets say PLA+; treat it as a silk PLA blend.

How fast can Toksen3D Silk Green print?

50-300mm/s in the settings bullet; another bullet claims 350mm/s on Bambu Lab printers.

What tolerance does the Toksen3D silk green spool have?

±0.03mm on 1.75mm filament.

See also