As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

Iverntech BMG Bowden Extruder with Bracket Review (2026)

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

The Iverntech Bowden Extruder (FM-AW026) is a black BMG-style feeder with dual drive gears and an internal 3:1 reduction, and what makes it easier to fit than many similar units is the universal stepper motor bracket packed with it. Iverntech suggests 385 E-steps as the starting value and uses a thumbscrew to set how hard the gears press on the filament. It is listed for the CR-10, the Ender 3 series, Anycubic Mega S, Tevo Tornado, Wanhao D9, Anet A8/E10 and Prusa i3 DIY kits. The listing does not name gear material or weight. Everything stated here traces back to the Iverntech listing.

What stands out

  • 3:1 geared dual drive
  • Universal stepper bracket included
  • Thumbscrew tension

Who it fits

Good fit for

Bowden printer owners who want a geared feeder and need a mounting bracket, for example on a frame where the stock extruder bolted straight to the motor.

Who should skip it

Direct drive printers, or anyone not ready to change E-steps in firmware or the printer menu.

Verdict: A geared dual drive feeder with the bracket you may otherwise have to print or buy.

Iverntech extruder specs

Dual drive, 3:1 ratio

Extra torque for feeding.

E-steps: 385

Suggested start value.

Thumbscrew tensioner

Fine-tune grip.

Universal stepper bracket

Included.

Model FM-AW026, black

Listing code and color.

Gear material, weight

Not stated.

Why the bracket helps

BMG-style extruders sit differently on the motor than the stock lever feeder, so many installs need a new mount. Iverntech includes a universal stepper motor bracket in the box, which saves printing one. Tension is set by a thumbscrew; the listing warns that too much pressure on soft filament makes it wind around the drive wheel.

Setting it up

Bolt the bracket to the frame, fit the motor and extruder, then set steps per mm to 385 and confirm with a 100mm extrusion test. Ease the thumbscrew back for TPU. Pick the Iverntech if you need the bracket; a bare BMG-style unit of the same 3:1 design costs about the same if your frame already has a mount.

Before you order

Checks for the Iverntech BMG extruder.

Check before you buy

  • Your printer uses a Bowden tube
  • You can set E-steps to about 385
  • The bracket fits your frame or motor position
  • You have a stepper motor to mount

The product at a glance

Iverntech Dual Drive Bowden Extruder

Best for: BMG installs needing a bracket

Extruder Type
Bowden Extruder
Color
Black

View on Amazon: Iverntech Dual Drive Bowden Extruder Affiliate link

Iverntech FM-AW026 black BMG-style Bowden extruder, 3:1 dual drive, 385 E-steps, thumbscrew tension, universal stepper bracket included.

Pros

  • Bracket in the box
  • Geared 3:1 dual drive
  • E-steps given

Cons

  • Firmware change needed
  • Gear material not listed

Good fit if

  • You need a mount for a BMG feeder
  • You print TPU on Bowden

Skip if

  • Your printer is direct drive

Verdict: A geared feeder that comes ready to mount.

Specifications side by side

Spec Iverntech Dual Drive Bowden Extruder
Extruder Type Bowden Extruder
Color Black
Model FM-AW026

Frequently asked questions

Does the Iverntech extruder include a bracket?

Yes, one universal stepper motor bracket.

What gear ratio does the Iverntech extruder use?

3:1 internal reduction with dual drive gears.

What E-steps should I set?

Iverntech recommends 385 as the start value.

Which printers does it fit?

CR-10, Ender 3 series, Anycubic Mega S, Tevo Tornado, Wanhao D9, Anet A8/E10 and Prusa i3 DIY kits, per the listing.

How is the filament tension adjusted?

With a thumbscrew tensioner.

See also