RAMBERY Silk & Matte Rainbow PLA 4-Pack (4x200g) Review
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
RAMBERY's Silk & Matte Rainbow set is four 200g rolls of 1.75mm PLA, 800g in all (the listing gives 1.76 lbs). Three rolls are shiny blends named Shiny Candy, Shiny Macaron and Shiny Universe; the fourth is a matte rainbow. Each roll carries four to five colors and changes color every 35-40g of printing, which is the number that matters most here: a small figure may only show one or two colors, while a vase, a bowl or a batch of holiday ornaments printed in one go cycles through the whole roll. RAMBERY pitches the set for decorations for Christmas, Easter, Halloween and Children's Day. The listing gives ±0.02mm diameter tolerance and says each spool is dried and vacuum sealed, but it lists no temperatures, speeds or bed settings. Our take is drawn from RAMBERY's product page and spec fields, without printing any of the four rolls.
What stands out
- PLA, 4 x 200g (800g total)
- 3 silk rolls + 1 matte rainbow
- 4-5 colors per roll
- Color change every 35-40g
- ±0.02mm, no print settings listed
Who it fits
Good fit for
Makers of gifts, vases and seasonal decorations who want color shifts without a multi-color printer, and want to try both shiny and matte finishes from one box.
Who should skip it
Anyone who needs a solid color, full 1kg rolls for big jobs, or published print settings.
Verdict: A sampler of length-wise rainbow PLA in three shiny blends and one matte; size prints so they use enough filament to show the colors.
RAMBERY rainbow 4-pack specs
4 x 200g rolls
Four small spools; 800g in total, not a full kilo.
35-40g per color
One color band per 35-40g of printed plastic.
Shiny Candy, Macaron, Universe
Three silk-type rainbow blends with different palettes.
Matte rainbow roll
A flat finish that hides layer lines better than silk.
±0.02mm
Stated diameter tolerance on 1.75mm.
How the RAMBERY rainbow effect shows up
This is length-wise rainbow filament: the color changes along the strand, so a print changes color by height rather than showing several colors side by side. With 35-40g per band, a 20g keychain stays one color, while a 150g vase passes through most of a roll. Printing several small items at once spreads one color across all of them; printing them one after another gives each its own color. The three shiny rolls suit smooth curved shapes, the matte roll suits figures and textured surfaces where gloss would show layer lines.
Printing the RAMBERY rainbow rolls
RAMBERY gives no nozzle or bed numbers, so start from a standard PLA profile for the matte roll and a silk PLA profile for the shiny ones, then check with a temperature tower. Shiny blends usually look best with a slower outer wall. A 200g roll runs out fast on large prints, so check the slicer's filament estimate before starting a long job, since a roll change mid-print breaks the color sequence.
Before buying the RAMBERY rainbow set
Checks.
Check before you buy
- Your RAMBERY rainbow prints will weigh 40g or more to show a color change
- You want shiny and matte rainbow finishes in one RAMBERY box
- You are fine tuning RAMBERY's rolls without published settings
- Your printer takes 1.75mm filament on small 200g spools
The product at a glance
RAMBERY Silk & Matte Rainbow PLA 4-Pack
Best for: Rainbow decor and gifts
- Material Type
- PLA
- Filament Diameter
- 1.75mm
- Net Weight
- 200g x 4 Spools
- Dimensional Accuracy
- +/-0.02mm
- Surface Finish
- Silk & Matte
- Color Printing
- Multi-Color
View on Amazon: RAMBERY Silk & Matte Rainbow PLA 4-Pack Affiliate link
RAMBERY rainbow PLA 4x200g: three shiny blends plus one matte, 4-5 colors per roll shifting every 35-40g, ±0.02mm; no print settings listed.
Pros
- Shiny and matte rainbow finishes in one box
- Color band length stated (35-40g)
- Small rolls for trying several palettes
Cons
- No print temperatures or speeds
- Only 800g in total
- Small prints show just one color
Good fit if
- You print rainbow vases, ornaments or gifts
Skip if
- You need a single solid color
Verdict: A rainbow PLA sampler with silk and matte rolls.
Specifications side by side
| Spec | RAMBERY Silk & Matte Rainbow PLA 4-Pack |
|---|---|
| Material Type | PLA |
| Filament Diameter | 1.75mm |
| Net Weight | 200g x 4 Spools |
| Dimensional Accuracy | +/-0.02mm |
| Surface Finish | Silk & Matte |
| Color Printing | Multi-Color |
| Compatible Material | PLA |
| Finish | Matte |
| Color Effect | Rainbow |
| Weight | 1.76 pounds |
| Size | 4 pack |
| Color | Multicolor Rainbow |
| Model | VM-T940-ETCS |
Frequently asked questions
How often does RAMBERY rainbow PLA change color?
Every 35-40g of printing, with four to five colors per roll.
How much filament is in the RAMBERY rainbow 4-pack?
Four 200g rolls, 800g in total.
Which finishes are in the RAMBERY silk and matte set?
Three shiny rolls (Candy, Macaron, Universe) and one matte rainbow roll.
What temperature does RAMBERY rainbow PLA need?
The listing gives none; start from PLA and silk PLA presets and tune.
Can RAMBERY rainbow PLA print two colors side by side?
No, the color changes along the strand, so it changes by layer height.
See also
- toksen3d silk green pla plus filament review
- snapmaker snapspeed pla orange 1kg review
- dynta pla filament 6 color 250g set review
- best 3d printers under 200
- best 3d printers under 300
- Best 3D Printers Under $500 in 2026: 7 Picks Ranked by Specs
- Best 3D Printers Under $1000: 6 Spec-Based Picks
- 6 Best 3D Printers Under $1500, Compared
- fungdo LCD 3d printer review
- easycargo 30pcs 3d printer heatsink review
