MIKA3D Silk Orange Rainbow PLA 1kg Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
MIKA3D's Silk Orange Rainbow PLA is for people who want a lot of color change in small and medium prints. The 1kg spool shifts randomly between silk orange, red, purple and peacock blue every 5 to 10 meters, faster than many rainbow spools, so even a figurine or ornament can show more than one band. The palette leans warm, a sunset look rather than a full rainbow, with blue as the cool accent. It is 1.75mm silk PLA with a pearly sheen and no polishing needed. The listing gives no temperatures or tolerance; MIKA3D only advises printing silk hotter and slower than regular PLA and using a new 0.4mm or larger nozzle, plus fixing the loose end in the spool holes after each print to avoid tangles. Because the order of colors is random, you cannot plan which part comes out which color. MIKA3D names Ender, ANYCUBIC, Flashforge and Monoprice printers and 3D pens. This review rests on MIKA3D's listing.
What stands out
- 1kg silk PLA, 1.75mm
- Orange, red, purple, peacock blue
- Random change every 5-10m
- No temps or tolerance listed
Who it fits
Good fit for
Decor printers who like warm sunset tones and want visible color changes on small figures, ornaments and vases.
Who should skip it
Anyone who needs color in set places, a cool-toned palette, or listed temperatures.
Verdict: A fast-shifting warm silk rainbow for small decorative prints.
MIKA3D orange rainbow details
5-10m per change
Small prints still show multiple colors.
Orange/red/purple/blue
Warm sunset palette with one cool accent.
Random order
Color placement cannot be planned.
Silk finish
Pearly shine without polishing.
0.4mm+ new nozzle
MIKA3D's advice for silk quality.
How the MIKA3D color shift works
Color changes happen along the strand, randomly and gradually, roughly every 5 to 10 meters. That short interval is what MIKA3D sells against other rainbow PLA. On a tall vase you get several bands; on a keychain, perhaps two. The bands follow layers, so prints stripe horizontally.
Printing MIKA3D silk orange rainbow
MIKA3D gives no numbers, only to print hotter and slower than normal PLA, so run a temperature tower from your silk PLA profile before a big print. Fit a fresh 0.4mm or larger nozzle, as MIKA3D advises. After each print, thread the loose end through the spool holes to keep the MIKA3D spool tangle-free.
Before buying MIKA3D silk orange rainbow
Checks.
Check before you buy
- You like MIKA3D's warm orange, red, purple and blue mix
- Random MIKA3D color order is fine for your print
- You can tune MIKA3D silk without listed temps
The product at a glance
MIKA3D 1kg Silk Rainbow PLA
Best for: Small multicolor decor
- Material Type
- PLA
- Filament Diameter
- 1.75mm
- Net Weight
- 1KG
- Surface Finish
- Silk
- Color Effect
- Rainbow
- Weight
- 2.2 pounds
View on Amazon: MIKA3D 1kg Silk Rainbow PLA Affiliate link
MIKA3D Silk Orange Rainbow PLA, 1kg, 1.75mm: orange, red, purple and peacock blue, random changes every 5-10m; no temps, advice to print hotter and slower with a 0.4mm+ nozzle.
Pros
- Very fast 5-10m color shifts
- Warm sunset palette
- Works in 3D pens too
Cons
- No temperatures or tolerance
- Random color order
- Silk needs slow printing
Good fit if
- You print small decor and want visible color changes
Skip if
- You need predictable color placement
Verdict: A quick-changing warm silk rainbow.
Specifications side by side
| Spec | MIKA3D 1kg Silk Rainbow PLA |
|---|---|
| Material Type | PLA |
| Filament Diameter | 1.75mm |
| Net Weight | 1KG |
| Surface Finish | Silk |
| Compatible Material | PLA |
| Size | 1KG |
| Finish | Silk |
| Color Effect | Rainbow |
| Weight | 2.2 pounds |
| Color | 1 Spool - Orange Rainbow |
| Model | orange rainbow |
Frequently asked questions
How often does MIKA3D orange rainbow silk PLA change color?
Randomly, about every 5 to 10 meters.
Which colors are in MIKA3D silk orange rainbow?
Silk orange, red, purple and peacock blue.
What temperature should MIKA3D silk rainbow print at?
MIKA3D lists none; it says to print silk hotter and slower than normal PLA.
Does MIKA3D orange rainbow work in 3D pens?
MIKA3D says it works with most FDM printers and 3D printing pens.
Featured in
See also
- mika3d dual color silk pla 6 spool bundle review
- comgrow pla filament blue 1kg review
- voxelab luminous hs glow pla filament review
- mika3d glow in the dark rainbow pla review
- mika3d 12 spool silk pla filament bundle review
- voigtlander voigtlander nokton 75mm f 1 5 review
- viltrox 75mm f 1 2 f1 2 pro review
