As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

Longer LK5 Pro 3 Review as a First Large Printer (2026)

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

Longer sells this LK5 Pro 3 listing as perfect for beginners, so here is what a first-time owner actually gets and still has to do. The good part: it arrives 95% assembled, so setup is mostly bolting the gantry to the base and wiring, and Longer adds lifetime technical support plus 24-hour customer service, which helps more than any spec when a first print fails. Quiet TMC2209 drivers keep it livable in a home, and filament and power sensors pause a job and resume it after a cut. The build is large at 11.8 × 11.8 × 15.7 inches, rated at 180mm/s with 0.1mm precision. What a beginner should know: the "automatic calibration" in the listing refers to X and Y vibration, not the bed, and bed leveling is not described as automatic, so you will level by hand. A large bed takes longer to level and heat than a small one. It weighs 28.7 lb. This look is drawn from Longer's listing.

What stands out

  • 95% pre-assembled
  • Lifetime tech support, 24-hour service
  • Runout and power-loss resume
  • 11.8 × 11.8 × 15.7in, quiet TMC2209

Who it fits

Good fit for

Beginners who want a large printer, do not mind learning manual bed leveling, and value a maker that answers questions.

Who should skip it

First-timers who want auto leveling and fast results, or who only print small items and do not need the size.

Verdict: A workable large first printer if you accept hand leveling; the support offer is its best beginner feature.

LK5 Pro 3 for a beginner

95% pre-assembled

Short build, mostly attaching the frame.

Lifetime support, 24-hour service

Help is available when early prints fail.

Hand bed leveling

No automatic bed leveling is described.

180mm/s, 0.1mm precision

Moderate speed with fine detail claims.

11.8 × 11.8 × 15.7in, 28.7 lb

A large machine for a beginner's desk.

What is done for you, what is not

Done: most assembly, quiet drivers, a lattice glass plate that releases parts, and sensors for runout and power loss. Not done: bed leveling, which you learn with a sheet of paper and the four knobs, and slicer setup. Smaller beginner printers with auto leveling get you printing faster; this one gives far more room once you have the routine down.

First weeks with the LK5 Pro 3

Start with PLA and the slicer profile Longer supplies. Level the bed when the printer is warm, then print a single-layer square across the plate to check it. Clean the glass with soap and water when prints stop sticking. Keep Longer's support contact handy for the first month.

Before ordering your first LK5 Pro 3

Beginner checks for this listing.

Check before you buy

  • You are willing to learn LK5 Pro 3 bed leveling by hand
  • Your desk fits a 28.7 lb LK5 Pro 3 with room for the moving bed
  • You will use the LK5 Pro 3 build size

The product at a glance

Longer LK5 Pro Large 3D Printer

Best for: Beginners who want a big build area

Build Volume
11.8 x 11.8x 15.7in. / 300*300*400mm
Print Speed
180mm/s
Printing Technology
FDM
Features
Resume Printing, Open Source
Target Audience
Beginners
Color
Black

View on Amazon: Longer LK5 Pro Large 3D Printer Affiliate link

Longer LK5 Pro 3: a 95% assembled, large printer with quiet drivers and lifetime support, but hand bed leveling.

Pros

  • Mostly assembled
  • Lifetime support and 24-hour service
  • Large build area

Cons

  • Manual bed leveling
  • Large bed is slower to set up
  • Moderate 180mm/s speed

Good fit if

  • You want a big first printer

Skip if

  • You need auto leveling

Verdict: A large first printer for patient beginners.

Specifications side by side

Spec Longer LK5 Pro Large 3D Printer
Build Volume 11.8 x 11.8x 15.7in. / 300*300*400mm
Print Speed 180mm/s
Printing Technology FDM
Features Resume Printing, Open Source
Target Audience Beginners
Color Black
Dimensions 11.8 × 11.8 × 15.7 inches
Weight 28.7 pounds
Size 11.8x11.8x15.7 in
Model LK5 Pro

Frequently asked questions

Is the Longer LK5 Pro 3 good for beginners?

It is mostly assembled and backed by lifetime support, but bed leveling is manual.

Does the LK5 Pro 3 auto-level its bed?

The listing's automatic calibration refers to X/Y vibration; bed leveling is not described as automatic.

How much of the LK5 Pro 3 comes assembled?

Longer says 95%.

How heavy is the LK5 Pro 3?

The listing gives 28.7 lb.

See also