LANDU Silver Silk PLA Filament (1.75mm, 1kg) Review
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
LANDU's silver silk PLA is a 1kg, 1.75mm spool with a shiny, silk-like finish, and silver is one of the most useful silk colors because it reads as metal: trophies, robot and sci-fi props, chess pieces, vases and ornaments look plated without paint. LANDU says no polishing is needed for the shine and pitches it for art and craft prints. Tolerance is ±0.02mm, the filament is dried for 24 hours and vacuum packed, and it is machine-wound and hand-checked to limit tangles. The spool is cardboard and LANDU even gives its empty weight, 0.3 lbs, which helps anyone who weighs spools to track what is left. LANDU also claims strong bed adhesion without lifting. There are no temperatures, speeds or bed settings on the listing, so start from a silk PLA preset. As with any silk PLA, the shine favors looks over strength, so keep it for display prints rather than load-bearing parts. This rundown is based on LANDU's listing and spec fields; we did not print with the spool.
What stands out
- Silk PLA, 1kg silver
- 1.75mm ±0.02mm
- 24h dried, vacuum packed
- Cardboard spool, 0.3 lb empty
- No print settings listed
Who it fits
Good fit for
Makers of metallic-look trophies, props, figures and decor who want silver shine without painting.
Who should skip it
Anyone printing functional parts, or owners of AMS-type feeders that struggle with cardboard spools.
Verdict: A plain, low-cost silver silk PLA for metallic-look display prints, with no published settings.
LANDU silver silk PLA specs
Silver silk finish
Metallic look straight off the printer.
±0.02mm
Tight diameter for steady flow.
0.3 lb empty spool
Weigh the spool to see what is left.
24h dried, vacuum packed
Ready to print from a sealed bag.
Cardboard spool
Recyclable, but check feeder fit.
Where silver silk works best
Silver silk shows off smooth curves and large surfaces, where the shine looks like polished metal; sharp, flat faces and tight detail show less of the effect. Robot figures, trophy cups, helmets, rings for cosplay and holiday ornaments are the natural uses. Layer lines also catch the light, so smaller layer heights help the metal look.
Printing LANDU silver silk PLA
LANDU gives no numbers, so start from a silk PLA preset and print a temperature tower to see where the shine peaks. Print the outer wall slowly for the best gloss. If you run an AMS or similar feeder, fit a spool adapter or rewind onto a plastic spool, since cardboard edges can rub and shed dust.
Before buying LANDU silver silk PLA
Checks.
Check before you buy
- You want a metallic silver look from LANDU silk
- Your LANDU silk prints are for display
- You will tune the silver silk profile yourself
- Your feeder accepts LANDU's cardboard spool
The product at a glance
LANDU Silk PLA 1.75mm 1kg Silver
Best for: Metallic-look decor
- Material Type
- PLA
- Filament Diameter
- 1.75 mm
- Net Weight
- 1 kg
- Max Print Speed
- 80 mm/s
- Dimensional Accuracy
- ±0.02 mm
- Surface Finish
- Silk
View on Amazon: LANDU Silk PLA 1.75mm 1kg Silver Affiliate link
LANDU silver silk PLA 1kg: metallic-look shine, 1.75mm ±0.02mm, 24h dried, cardboard spool 0.3 lb empty; no print settings listed.
Pros
- Metallic silver look without paint
- Tight ±0.02mm tolerance
- Empty spool weight given
Cons
- No print settings given
- Cardboard spool in AMS-type feeders
- Silk PLA is weaker than plain PLA
Good fit if
- You print silver silk trophies or props
Skip if
- You need strong LANDU parts
Verdict: A low-cost silver silk PLA for metallic-look decor.
Specifications side by side
| Spec | LANDU Silk PLA 1.75mm 1kg Silver |
|---|---|
| Material Type | PLA |
| Filament Diameter | 1.75 mm |
| Net Weight | 1 kg |
| Max Print Speed | 80 mm/s |
| Dimensional Accuracy | ±0.02 mm |
| Surface Finish | Silk |
| Compatible Material | PLA |
| Size | 1KG |
| Finish | Silk |
| Dimensions | 7.87 × 2.67 × 7.87 inches |
| Weight | 2.2 pounds |
| Color | Silk Pla-silver |
Frequently asked questions
Does LANDU silver silk PLA need polishing?
No, LANDU says the silk shine comes straight off the printer.
What temperature does LANDU silver silk PLA need?
The listing gives none; start from a silk PLA preset.
What tolerance does LANDU silver silk have?
±0.02mm on 1.75mm filament.
How much does the empty LANDU spool weigh?
0.3 lbs, per LANDU.
Is LANDU silver silk PLA strong?
Silk PLA is chosen for looks; keep it for display rather than load-bearing parts.
See also
- rambery silk matte rainbow pla 4 pack review
- toksen3d silk green pla plus filament review
- snapmaker snapspeed pla orange 1kg review
- best 3d printers under 200
- best 3d printers under 300
- Best 3D Printers Under $500 in 2026: 7 Picks Ranked by Specs
- Best 3D Printers Under $1000: 6 Spec-Based Picks
- 6 Best 3D Printers Under $1500, Compared
- voigtlander voigtlander nokton 75mm f 1 5 review
- viltrox 75mm f 1 2 f1 2 pro review
