Eujgoov Kobra 3 X/Y/Z Timing Belt Kit Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Eujgoov sells this open timing belt set as a replacement for the Anycubic Kobra 3, covering the X, Y and Z axes, but the Kobra 3 name appears only in the title. The bullets talk about printers with X, Y and Z axes in general and about other machinery. What the page does confirm: the belt is rubber with fiberglass reinforcement, it needs no lubrication, and each belt has a buckle already pressed on one end, so only the free end has to be clamped at the carriage. What it leaves out is the part a Kobra 3 owner needs most: belt lengths, width, pitch and how many belts are in the bag. The model field is a random code, not a part number. It may be the right set, but you are trusting the title. Compare it with a Kobra 3 kit that prints lengths before you choose; this summary comes from Eujgoov's own page.
What stands out
- Named for Kobra 3 X, Y and Z axes
- Fiberglass-reinforced rubber
- Buckle pre-pressed on one end
Who it fits
Good fit for
Kobra 3 owners who need a quick belt set and are willing to measure the old belts before fitting.
Who should skip it
Anyone who wants stated lengths, width and belt count before ordering.
Verdict: Plausible Kobra 3 belts, but the page gives too few numbers to be sure.
Eujgoov Kobra 3 belt details
Kobra 3 (title)
Not repeated in the bullets.
X, Y, Z axes
Set is sold as a full replacement.
Fiberglass core
Limits stretch under load.
One pre-pressed buckle per belt
Clamp only the other end.
Lengths and width
Not stated by Eujgoov.
No lubrication
Rubber belts run dry.
What the Eujgoov bag likely holds
A Kobra 3 set normally means three belts cut to length, one per axis. Eujgoov's page does not count them, so open the bag and lay each new belt beside the matching old one before cutting anything. The pre-pressed buckle saves one crimp per belt, which matters on the Z belt where access is tight.
Fitting Eujgoov belts on a Kobra 3
Slacken the tensioner, free the old belt at the toolhead, thread the new one round the pulleys with the pressed buckle at the fixed end, then clamp and re-tension. Check that the teeth face the pulleys. Choose the Eujgoov set if you only need replacement belts quickly and can measure; choose a Kobra 3 kit that lists lengths and spare buckles if you want to confirm the fit on paper first.
Before you order
Checks for the Eujgoov Kobra 3 belt set.
Check before you buy
- Your printer is an Anycubic Kobra 3
- You can measure the old Kobra 3 belts against the Eujgoov ones
- You accept that Eujgoov states no belt count
- You have pliers for the free-end buckle
The product at a glance
Eujgoov Open Timing Belt for Kobra 3
Best for: Kobra 3 owners
View on Amazon: Eujgoov Open Timing Belt for Kobra 3 Affiliate link
Eujgoov open belt set for the Kobra 3 X, Y and Z axes, fiberglass-reinforced, one pre-pressed buckle per belt.
Pros
- Covers all three Kobra 3 axes
- Fiberglass core
- Pre-pressed buckle saves a crimp
Cons
- No lengths or belt count
- Kobra 3 named only in the title
Good fit if
- You own a Kobra 3
- You will measure before fitting
Skip if
- You want a full spec sheet
Verdict: Usable, but buy it with a tape measure ready.
Specifications side by side
| Spec | Eujgoov Open Timing Belt for Kobra 3 |
|---|---|
| Model | Eujgoovoq056vpurz |
Frequently asked questions
Does the Eujgoov belt set fit the Kobra 3?
The title names the Kobra 3 X, Y and Z axes; the bullets do not repeat it.
How long are the Eujgoov Kobra 3 belts?
Eujgoov does not give lengths, widths or pitch.
What are the Eujgoov belts made of?
Rubber with fiberglass reinforcement.
Do the Eujgoov belts come with buckles?
Each belt has a buckle pre-pressed on one end.
Do the Eujgoov belts need grease?
No, the page says they run without lubrication.
See also
- xhsesa kobra 3 timing belt kit review
- comtree upgraded extruder brass gear review
- estink belt tension meter review
- best 3d printers under 200
- best 3d printers under 300
- Best 3D Printers Under $500 in 2026: 7 Picks Ranked by Specs
- Best 3D Printers Under $1000: 6 Spec-Based Picks
- 6 Best 3D Printers Under $1500, Compared
- ideaformer 3d conveyor belt 3d printer review
- unxuey 50pcs 3d printer heatsink review
