As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

IdeaFormer Kobra 3 Max 0.4mm Hardened Steel Nozzle 2-Pack Review (2026)

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

This IdeaFormer-3D pack holds two 0.4mm quick-swap nozzles with integrated hardened steel tips for Anycubic's Kobra 3 line. The title says Kobra 3 Max, while the package bullet names the Kobra 3 and the Kobra 3 Max Combo, so the listing itself is not clear on every model it fits; check your printhead type before ordering. Each nozzle is a one-piece unit with a step-locking design meant to stop wobble and leaks at speed. IdeaFormer claims up to 30mm³/s flow from an enlarged melt chamber, which it ties to 600mm/s printing, and an inner wall finish of Ra<0.4. The filament list covers PLA, ABS, PETG, TPU, PP, PC and carbon-fiber blends (PLA-CF, PA-CF, PET-CF), all 1.75mm. The 0.4mm size matches the stock profile, so this is a like-for-like spare that adds wear resistance. Our notes rely on IdeaFormer's listing and published specs alone; no part was fitted for this review.

What stands out

  • Two 0.4mm one-piece nozzles
  • Hardened steel tip for CF blends
  • Step-lock quick-swap fit
  • Up to 30mm³/s flow claimed
  • Fit wording differs between title and bullets

Who it fits

Good fit for

Kobra 3 or Kobra 3 Max Combo owners who print CF or PA-CF filament and want a 0.4mm spare that will not wear out like a stock tip.

Who should skip it

Owners of other Anycubic printers such as the Kobra S1 or Kobra X, and anyone who wants a finer or coarser nozzle size.

Verdict: A like-for-like 0.4mm wear-resistant spare for the Kobra 3 family, once fit is confirmed.

Kobra 3 0.4mm hardened nozzle specs

0.4mm

Stock nozzle size: no slicer profile change.

Integrated hardened tip

Steel at the wear point for CF and glass-filled filament.

Up to 30mm³/s

IdeaFormer's flow claim; real flow depends on the hotend heater.

Ra<0.4 inner wall

A smooth bore for steady extrusion.

2 per pack

One in use, one ready for a quick change.

The Kobra 3 quick-swap design

The nozzle is a single piece with its throat, so a change on the Kobra 3 is a pull-and-push job rather than unscrewing a hot tip. The step-locking shoulder is what keeps it aligned at high acceleration. Because the throat comes with the nozzle, a clog that reaches the throat is solved by swapping the whole unit.

Running CF filament on the Kobra 3 with this tip

Hardened steel holds its bore under PA-CF and PET-CF, where a standard tip widens over time and starts to under-extrude. Steel moves heat less freely than brass, so raise the temperature a little when moving a PLA profile across, and keep one of the two nozzles for abrasive spools only if you switch materials often.

Before buying the Kobra 3 0.4mm hardened pair

Checks.

Check before you buy

  • Your printer is a Kobra 3, Kobra 3 Combo or Kobra 3 Max Combo
  • Your Kobra 3 printhead uses the quick-swap nozzle
  • You print CF or other abrasive filament on the Kobra 3

The product at a glance

IdeaFormer-3D 0.4mm Kobra 3 Hardened Steel Nozzles

Best for: Kobra 3 CF printing

Primary Material
Hardened Steel
Nozzle Diameter
0.4mm

View on Amazon: IdeaFormer-3D 0.4mm Kobra 3 Hardened Steel Nozzles Affiliate link

Two 0.4mm integrated hardened-tip quick-swap nozzles for the Anycubic Kobra 3 family, with up to 30mm³/s flow claimed and CF blends listed.

Pros

  • Stock 0.4mm size
  • Hardened tip for CF
  • Quick-swap one-piece design

Cons

  • Title and bullets disagree on models
  • No temperature limit given
  • Only two in the pack

Good fit if

  • You print CF on a Kobra 3 or Kobra 3 Max Combo

Skip if

  • Your Anycubic is not in the Kobra 3 line

Verdict: A wear-resistant 0.4mm spare for Kobra 3 printers.

Specifications side by side

Spec IdeaFormer-3D 0.4mm Kobra 3 Hardened Steel Nozzles
Primary Material Hardened Steel
Nozzle Diameter 0.4mm
Nozzle Material Hardened Steel
Size 0.4mm

Frequently asked questions

Which printers does the IdeaFormer Kobra 3 Max 0.4mm nozzle fit?

The bullets name the Anycubic Kobra 3 and Kobra 3 Max Combo; the title names the Kobra 3 Max.

How many Kobra 3 hardened nozzles are in the pack?

Two 0.4mm nozzles.

Can this Kobra 3 nozzle print PA-CF?

Yes, PA-CF is on the listed filament range.

What flow rate does IdeaFormer claim for the Kobra 3 Max nozzle?

Up to 30mm³/s.

See also