The Best IdeaFormer-3D Printer Accessories in 2026: 12 Picks
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
IdeaFormer-3D sells two kinds of accessories: build plates and nozzles for other brands' printers (mostly Bambu Lab, plus ANYCUBIC, ELEGOO and large-bed machines) and parts for its own IR3 V2 belt printer. Our top pick is the PEI cool plate for 257mm Bambu beds, which grips PLA at 30-50℃ (10-20℃ below standard PEI), also handles PETG and ABS at lower heat, and needs no glue; just keep TPU off it. The rest covers two decorative Bambu plates, a 310mm PEI sheet, hardened steel nozzles for four printers, and IR3 V2 extras: belt, enclosure, extended roller, nozzles and silicone socks. Facts come from IdeaFormer-3D's listings.
Our top pick: IdeaFormer-3D 257x257mm PEI Cool Plate.
Quick picks
Our 12 picks
IdeaFormer-3D 257x257mm PEI Cool Plate
Best for: Best overall
- Dimensions
- 257x257mm
- Build Surface Type
- PEI Cool Plate
- Compatible Material
- PLA
View on Amazon: IdeaFormer-3D 257x257mm PEI Cool Plate Affiliate link
IdeaFormer-3D PEI cool plate, 257x257mm with QR code for Bambu X1/X1C/X1E/P1P/P1S/A1/X2D: PLA at 30~50℃, PETG 50~70℃, ABS 70~90℃, 10~20℃ cooler than standard PEI, durable coating, no glue; never TPU, avoid acetone.
Pros
- Lower bed heat
- Great for small-contact PLA
- Cheap
Cons
- No TPU
Good fit if
- Most of your Bambu jobs are PLA
Skip if
- You print TPU often
Verdict: The easiest IdeaFormer upgrade for Bambu owners.
IdeaFormer-3D 257x257mm PEO and Textured PEI Plate
Best for: Two surfaces
- Primary Material
- Spring steel
- Dimensions
- 257x257mm
- Build Surface Type
- Smooth PEO, Textured PEI
- Build Plate Material
- PEI, Spring Steel, PEO
- Weight
- 12.3 ounces
View on Amazon: IdeaFormer-3D 257x257mm PEO and Textured PEI Plate Affiliate link
IdeaFormer-3D PEO+PEI plate RC-257 for Bambu X2D/X1C/X1/P1P/P1S/P2S/A1: smooth PEO side for a mosaic pattern (PLA/TPU 50-70℃, PETG 70-80℃), textured PEI side for PLA, PETG, ABS, TPU, ASA, PVA, PET and PA; grips at about 60℃.
Pros
- Two finishes
- TPU on PEO
- Flex release
Cons
- Low stock at our check
Good fit if
- You print a mix of PLA, PETG and TPU
Skip if
- You want a cool plate
Verdict: One plate for most filaments.
IdeaFormer-3D 257x257mm Rainbow PEY and Textured PEI Plate
Best for: Decorative
- Primary Material
- Spring steel
- Dimensions
- 257x257mm
- Maximum Temperature
- 180℃ (PEY), 260℃ (PEI)
- Build Surface Type
- Smooth rainbow PEY, textured PEI
- Build Plate Material
- PEI, Spring Steel
- Weight
- 12.3 ounces
View on Amazon: IdeaFormer-3D 257x257mm Rainbow PEY and Textured PEI Plate Affiliate link
IdeaFormer-3D Rainbow PEY + textured PEI plate PEY-257 for Bambu X2D/X1C/X1/X1E/P1P/P1S/P2S/A1: starry PEY pattern up to 180℃ for PLA, TPU, PETG and ABS; textured PEI side for PA, PC and more.
Pros
- Star pattern bottoms
- PEI fallback side
- Wide Bambu fit
Cons
- Needs careful cleaning
Good fit if
- You print gifts or decor
Skip if
- You hate wiping the bed between prints
Verdict: Eye-catching bottoms on Bambu prints.
IdeaFormer-3D 310x310mm Textured PEI Plate
Best for: Large bed
- Dimensions
- 310x310mm
- Maximum Temperature
- 260℃
- Build Surface Type
- Textured PEI
- Build Plate Material
- PEI, Spring Steel
View on Amazon: IdeaFormer-3D 310x310mm Textured PEI Plate Affiliate link
IdeaFormer-3D 310x310mm double-sided textured PEI sheet with magnetic base; good grip near 60℃ for PLA, PETG, ABS, TPU, ASA, PVA, PET, PA and PC; lists QIDI Plus 4, Artillery Sidewinder X1/X2, CR-10 and CR-10S.
Pros
- Magnet base included
- Both sides textured
- Large size
Cons
- Low stock at our check
Good fit if
- You own a 310mm-bed printer
Skip if
- Your bed is 257mm or smaller
Verdict: A texture upgrade for big beds.
IdeaFormer-3D 0.6mm Kobra 3 Hardened Steel Nozzles
Best for: Kobra 3 Max
- Primary Material
- Hardened Steel
- Nozzle Diameter
- 0.6mm
View on Amazon: IdeaFormer-3D 0.6mm Kobra 3 Hardened Steel Nozzles Affiliate link
IdeaFormer-3D 0.6mm integrated nozzles, 2 pieces with hardened steel tips and step-locking design, Ra<0.4 bore, up to 30mm³/s and 600mm/s; for PLA to PA-CF. Title says Kobra 3 Max; package line also says Kobra 3.
Pros
- High flow
- Composite-ready
- Step-lock fit
Cons
- Fit wording mixed
Good fit if
- You print CF filament on a Kobra 3 Max
Skip if
- You want 0.4mm detail
Verdict: Fast, wear-proof nozzles for the big Kobra.
IdeaFormer-3D 0.4mm Hardened Steel Nozzles
Best for: Centauri Carbon
- Primary Material
- Hardened steel
- Nozzle Diameter
- 0.4mm
View on Amazon: IdeaFormer-3D 0.4mm Hardened Steel Nozzles Affiliate link
IdeaFormer-3D 0.4mm hardened steel nozzles, 5 pieces for the ELEGOO Centauri Carbon and Centauri Carbon 2; polished interior, rated for CF-PLA, CF-PETG and CF-nylon, aimed at long batch printing.
Pros
- Five spares
- Abrasive-ready
- Daily 0.4mm size
Cons
- Centauri only
Good fit if
- You run a Centauri Carbon all day
Skip if
- You print plain PLA only
Verdict: Long-life spares for the Centauri.
IdeaFormer-3D 0.4mm Hardened Steel Nozzles
Best for: Bambu A1
- Primary Material
- Hardened steel
- Maximum Temperature
- 500℃
- Nozzle Diameter
- 0.4mm
- Dimensions
- 0.16 × 0.16 × 0.35 inches
View on Amazon: IdeaFormer-3D 0.4mm Hardened Steel Nozzles Affiliate link
IdeaFormer-3D 0.4mm hardened steel nozzles, 5 pieces for Bambu A1/A1 Mini, rated to 500℃ with under 0.02mm error; magnetic quick-swap fit, but only on a third-party removable-nozzle hotend.
Pros
- Five hardened nozzles
- Rated to 500℃
- Magnetic quick swap
Cons
- Needs third-party hotend
Good fit if
- You already fitted a removable-nozzle hotend to your A1
Skip if
- You run the stock A1 hotend
Verdict: Cheap hardened spares for modded A1s.
IdeaFormer-3D Metal PEI Textured Belt
Best for: IR3 V2 belt
- Primary Material
- Metal
- Dimensions
- width: 300mm, perimeter: 1390mm
- Build Surface Type
- Textured PEI
- Compatible Material
- PLA, PETG, ABS, TPU, ASA
View on Amazon: IdeaFormer-3D Metal PEI Textured Belt Affiliate link
IdeaFormer-3D metal PEI textured belt for the IR3 V2 only: 300mm wide, 1390mm perimeter, power-sprayed matte PEI, supports PLA, PETG, ABS, TPU and ASA.
Pros
- Metal durability
- Matte PEI grip
- Official fit
Cons
- Low stock at our check
- Costliest pick
Good fit if
- Your IR3 V2 belt is worn
Skip if
- You own a flat-bed printer
Verdict: The core consumable of the IR3 V2.
IdeaFormer-3D IR3 V2 Metal Extension Roller
Best for: Extended roller
- Primary Material
- Aluminum and iron
View on Amazon: IdeaFormer-3D IR3 V2 Metal Extension Roller Affiliate link
IdeaFormer extended roller for the IR3 V1 and V2: aluminum and iron bracket that supports long prints as they leave the belt so they do not tip or detach; set the roller level with or slightly below the bed.
Pros
- Stops long parts tipping
- Rigid metal
- Quick install
Cons
- Only for IR3 printers
Good fit if
- You print long batches on an IR3
Skip if
- You only print short parts
Verdict: Makes endless printing practical.
IdeaFormer-3D IR3 V2 Belt 3D Printer Enclosure
Best for: IR3 enclosure
- Dimensions
- 550x710x575mm
- Color
- Black
View on Amazon: IdeaFormer-3D IR3 V2 Belt 3D Printer Enclosure Affiliate link
IdeaFormer-3D enclosure for the IR3 V2: thickened cotton layer for steady temperature, noise isolation, fire-resistant dustproof shell. Title size 21.65x6.69x22.64in conflicts with the 550x710x575mm package line.
Pros
- Warmer prints
- Quieter
- Dust cover
Cons
- Size figures conflict
- Low stock at our check
Good fit if
- You run ABS or ASA batches on the belt printer
Skip if
- Your IR3 sits in a warm room
Verdict: A fitted tent for the belt printer.
IdeaFormer-3D 0.4mm Belt Printer Hardened Steel Nozzles
Best for: IR3 nozzles
- Primary Material
- Hardened Steel
- Maximum Temperature
- 500℃
- Nozzle Diameter
- 0.4mm
View on Amazon: IdeaFormer-3D 0.4mm Belt Printer Hardened Steel Nozzles Affiliate link
IdeaFormer-3D 0.4mm hardened steel nozzles, 5 pieces for the IR3 V2: 7.8 Mohs, 22W/m.k, up to 500℃, Ra<0.4 bore, fits the original hotend thread; use separate nozzles per filament to avoid deposits.
Pros
- Fits stock hotend
- Hard wearing
- Five pieces
Cons
- IR3 V2 only
Good fit if
- You print abrasive filament on an IR3 V2
Skip if
- You own a different printer
Verdict: Spare nozzles for the belt printer.
IdeaFormer-3D IR3 V2 Silicone Sock 5-Pack
Best for: Best budget
- Primary Material
- Silicone
- Maximum Temperature
- 300°C
View on Amazon: IdeaFormer-3D IR3 V2 Silicone Sock 5-Pack Affiliate link
IdeaFormer-3D silicone socks, 5 pieces for the IR3 V2 heating block: heat resistant to 300°C, speed up heating, keep plastic from scorching on the block, tool-free fit.
Pros
- Lowest price here
- Five socks
- Protects heater
Cons
- Low stock at our check
Good fit if
- Your IR3 V2 sock tore
Skip if
- You own another printer
Verdict: Small spares that save a heater block.
Specifications side by side
| Spec | IdeaFormer-3D 257x257mm PEI Cool Plate | IdeaFormer-3D 257x257mm PEO and Textured PEI Plate | IdeaFormer-3D 257x257mm Rainbow PEY and Textured PEI Plate | IdeaFormer-3D 310x310mm Textured PEI Plate | IdeaFormer-3D 0.6mm Kobra 3 Hardened Steel Nozzles | IdeaFormer-3D 0.4mm Hardened Steel Nozzles | IdeaFormer-3D 0.4mm Hardened Steel Nozzles | IdeaFormer-3D Metal PEI Textured Belt | IdeaFormer-3D IR3 V2 Metal Extension Roller | IdeaFormer-3D IR3 V2 Belt 3D Printer Enclosure | IdeaFormer-3D 0.4mm Belt Printer Hardened Steel Nozzles | IdeaFormer-3D IR3 V2 Silicone Sock 5-Pack |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Primary Material | not stated | Spring steel | Spring steel | not stated | Hardened Steel | Hardened steel | Hardened steel | Metal | Aluminum and iron | not stated | Hardened Steel | Silicone |
| Dimensions | 257x257mm | 257x257mm | 257x257mm | 310x310mm | not stated | not stated | not stated | width: 300mm, perimeter: 1390mm | not stated | 550x710x575mm | not stated | not stated |
| Maximum Temperature | not stated | not stated | 180℃ (PEY), 260℃ (PEI) | 260℃ | not stated | not stated | 500℃ | not stated | not stated | not stated | 500℃ | 300°C |
| Nozzle Diameter | not stated | not stated | not stated | not stated | 0.6mm | 0.4mm | 0.4mm | not stated | not stated | not stated | 0.4mm | not stated |
| Build Surface Type | PEI Cool Plate | Smooth PEO, Textured PEI | Smooth rainbow PEY, textured PEI | Textured PEI | not stated | not stated | not stated | Textured PEI | not stated | not stated | not stated | not stated |
| Compatible Material | PLA | not stated | not stated | not stated | not stated | not stated | not stated | PLA, PETG, ABS, TPU, ASA | not stated | not stated | not stated | not stated |
| Color | Cool Plate (Double Sided) | Smooth PEO+Textured PEI | PEY+PEI(Starry PEY+Textured PEI) | Textured PEI+Magnetic Plate | not stated | 5Pcs 0.4mm Hardened Steel Nozzles | A1/A1 Mini Hardened Steel | not stated | not stated | Black | not stated | not stated |
| Color Effect | not stated | not stated | Rainbow | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated |
| Build Plate Material | PEI | PEI, Spring Steel, PEO | PEI, Spring Steel | PEI, Spring Steel | not stated | not stated | not stated | PEI | not stated | not stated | not stated | not stated |
| Build Plate Size | 257x257mm | 257x257mm | 257x257mm | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated |
| Surface Finish | not stated | Smooth, Textured | Textured | Textured | not stated | not stated | not stated | Textured | not stated | not stated | not stated | not stated |
| Nozzle Material | not stated | not stated | not stated | not stated | Hardened Steel | Hardened Steel | Hardened Steel | not stated | not stated | not stated | Hardened Steel | not stated |
| Weight | not stated | 12.3 ounces | 12.3 ounces | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated | not stated |
| Size | 257x257mm | 257x257mm | For Bambu X2D/X1/X1C/X1E/P1P/P1S/P2S/A1 | 310x310mm | 0.6mm | 0.4mm | 0.4mm | not stated | not stated | not stated | 0.4mm | not stated |
| Model | not stated | RC-257 | PEY-257 | PEI-DBS | not stated | not stated | not stated | not stated | not stated | IR3V2-ENCLOSURE | not stated | not stated |
Plates and nozzles for other printers, parts for the IR3
Seven picks fit other brands: three 257mm Bambu plates, a 310mm sheet for Sidewinder, CR-10 and QIDI Plus 4 beds, and hardened nozzle packs for the Kobra 3 Max, Centauri Carbon and Bambu A1. Five serve the IR3 V2 belt printer, from the PEI belt to an extended roller that keeps long parts from tipping.
Hardened steel as the default
All four nozzle packs here are hardened steel, rated for abrasive filaments such as CF-PLA and CF-nylon. The A1 pack is the odd one out: it needs a third-party hotend with removable nozzles, because Bambu's own A1 hotend cannot be taken apart.
How to choose IdeaFormer-3D accessories
-
No TPU on the cool plate
IdeaFormer warns TPU can damage the cool plate; use the PEO or PEI side of the other plates for TPU.
-
Keep PEY clean
The PEY star pattern can fade if touched with oily hands; wipe with isopropyl and a lint-free towel between prints.
-
Check A1 hotend type
The A1/A1 Mini nozzles fit only third-party hotends with removable nozzles.
-
Mind enclosure size
The IR3 V2 enclosure title gives 21.65x6.69x22.64in but the package line says 550x710x575mm; confirm before buying.
Frequently asked questions
What is the best IdeaFormer-3D accessory?
The PEI cool plate for 257mm Bambu beds: PLA at 30-50℃, PETG at 50-70℃ and ABS at 70-90℃ without glue.
Which IdeaFormer-3D plate gives a starry finish?
The Rainbow PEY + textured PEI plate; the PEY side handles up to 180℃ and suits PLA, TPU, PETG and ABS.
Can IdeaFormer-3D A1 nozzles go on the stock Bambu hotend?
No. IdeaFormer says the original A1 hotend cannot be disassembled, so these need a third-party hotend.
What does the IR3 V2 extended roller do?
It supports long prints as the belt moves so they do not tip or detach; it fits IR3 V1 and V2.
Which printers fit the IdeaFormer-3D 310x310mm PEI sheet?
IdeaFormer lists the QIDI Plus 4, Artillery Sidewinder X1 and X2, Creality CR-10 and CR-10S, among others; a magnetic base is included.
See also
- best comgrow 3d printer accessories
- best sovol 3d printer accessories
- best KOYOFEI 3d printer accessories
- ideaformer 3d pei cool plate qr review
- ideaformer 3d peo pei build plate bambu review
- IdeaFormer-3D 257x257mm Rainbow PEY Textured Review (2026): A Spec-Based Look
- IdeaFormer-3D 310x310mm Textured PEI Plate Review: Specs, Pros and Cons
- IdeaFormer-3D 0.6mm Hardened Steel Nozzle for Kobra 3 Review
- best silver stand mixer accessories
- best space heater accessories with timer











