As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

IdeaFormer IR3 V2 0.6mm Hardened Steel Nozzle 5-Pack Review

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

IdeaFormer's five-pack of 0.6mm hardened steel nozzles is made for the IR3 V2 conveyor belt printer and, per the listing, threads straight into its original hotend. The 0.6mm size is the point of this pack: on a belt printer that often runs long parts or batches, a wider nozzle lays thicker lines and cuts print time, and it is less likely to clog with filled filaments. IdeaFormer gives 7.8 Mohs hardness, 22W/m·K thermal conductivity, a 500°C maximum and an inner wall roughness of Ra<0.4, and lists PLA, PETG, ABS, TPU, ASA, PP and carbon-fiber blends such as PET-CF, PETG-CF and PLA-CF. Hardened steel conducts heat less well than brass, so plan on a slightly higher temperature or lower flow than a brass nozzle needs. IdeaFormer also suggests keeping separate nozzles for separate filaments to avoid residue build-up, and five in a box makes that easy. These notes rest on IdeaFormer's listing and spec fields; we have not fitted the nozzles.

What stands out

  • 5 x 0.6mm hardened steel nozzles
  • Fits IdeaFormer IR3 V2 stock hotend
  • 7.8 Mohs, 22W/m·K
  • Up to 500°C
  • Ra<0.4 inner wall

Who it fits

Good fit for

IR3 V2 owners who print long parts or batches and want faster 0.6mm lines, or who run carbon-fiber and other abrasive filaments.

Who should skip it

Owners of other printers, and IR3 V2 users after the finest detail, who should stay on 0.4mm.

Verdict: A sensible 0.6mm upgrade pack for the IR3 V2, especially for CF filaments; expect less fine detail than 0.4mm.

IdeaFormer IR3 V2 0.6mm nozzle specs

0.6mm bore

Thicker lines, faster prints, less clogging.

Hardened steel, 7.8 Mohs

Resists wear from carbon-fiber blends.

22W/m·K

Lower conductivity than brass; may need more heat.

500°C max

Rated well above common filament temperatures.

Ra<0.4 bore

Smooth inner wall for steady flow.

Why 0.6mm on the IR3 V2

Belt printers are bought for long and repeated parts: rails, swords, signs, batches of brackets. A 0.6mm nozzle moves noticeably more plastic per pass than 0.4mm, so those jobs finish sooner and walls come out thicker and stronger. The cost is detail: small text and fine features soften. Hardened steel matters once you print PETG-CF, PLA-CF or glow filaments, which wear a brass nozzle out of round over time.

Fitting IdeaFormer 0.6mm nozzles on the IR3 V2

Change nozzles with the hotend hot and tighten firmly, as IdeaFormer says, to stop leaks at the thread. Update the nozzle size in the slicer profile so line width and flow match 0.6mm. Start a few degrees above your brass settings and check flow. With five in the pack, keep one nozzle per filament family, which is IdeaFormer's own advice for avoiding deposits.

Before buying IdeaFormer IR3 V2 0.6mm nozzles

Checks.

Check before you buy

  • Your printer is an IdeaFormer IR3 V2
  • You want faster 0.6mm lines on the IR3 V2
  • You print CF or other abrasive filament on the IR3 V2
  • You will update IR3 V2 slicer settings to 0.6mm

The product at a glance

IdeaFormer-3D 0.6mm IR3 V2 Nozzles

Best for: IR3 V2 batch printing

Primary Material
Hardened Steel
Maximum Temperature
500℃
Nozzle Diameter
0.6mm

View on Amazon: IdeaFormer-3D 0.6mm IR3 V2 Nozzles Affiliate link

IdeaFormer IR3 V2 0.6mm hardened steel nozzles, 5-pack: fit the stock hotend, 7.8 Mohs, 22W/m·K, up to 500°C, Ra<0.4 bore.

Pros

  • Faster lines for long belt prints
  • Handles carbon-fiber filaments
  • Five spares in a pack

Cons

  • Less fine detail than 0.4mm
  • Steel needs more heat than brass
  • IR3 V2 only

Good fit if

  • You run long or CF prints on an IR3 V2

Skip if

  • You need fine IR3 V2 detail

Verdict: A 0.6mm hardened upgrade pack for the IR3 V2.

Specifications side by side

Spec IdeaFormer-3D 0.6mm IR3 V2 Nozzles
Primary Material Hardened Steel
Maximum Temperature 500℃
Nozzle Diameter 0.6mm
Nozzle Material Hardened Steel
Size 0.6mm

Frequently asked questions

Which printer do these IdeaFormer 0.6mm nozzles fit?

The IdeaFormer IR3 V2 belt printer, threaded into its original hotend.

How many nozzles come in the IdeaFormer IR3 V2 0.6mm pack?

Five 0.6mm hardened steel nozzles.

Can the IdeaFormer IR3 V2 0.6mm nozzles print carbon-fiber filament?

Yes, IdeaFormer lists PET-CF, PETG-CF and PLA-CF.

What temperature can the IdeaFormer 0.6mm nozzles take?

Up to 500°C, per IdeaFormer.

Do hardened IR3 V2 nozzles need different settings?

Steel transfers heat less well than brass, so a slightly higher temperature or lower flow may help.

See also