IdeaFormer IR3 V2 0.4mm Hardened Steel Nozzle 5-Pack Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
IdeaFormer-3D packs five 0.4mm hardened steel nozzles in this kit and fits them to one printer: its own IR3 V2 conveyor belt machine. A belt printer is often left running long batches or very long parts, so nozzle wear adds up faster than on a desk printer used now and then, and carbon-fiber blends grind a brass tip out of shape. The listing gives 7.8 Mohs hardness, 22W/m.k thermal conductivity, an inner wall finish of Ra<0.4 and a material limit of 500℃. It names PLA, PETG, ABS, TPU, ASA, PP and several CF blends (PET-CF, PETG-CF, PLA-CF) plus PC-PETG-HF. The 500℃ figure is the steel, not the IR3 V2 hotend, which sets the real ceiling. IdeaFormer also advises keeping separate nozzles per filament type to avoid build-up, and five in a box make that easy. This review is drawn from IdeaFormer's listing and published specs only, with no nozzle fitted on our side.
What stands out
- Five 0.4mm nozzles for the IR3 V2
- Hardened steel, 7.8 Mohs
- Ra<0.4 bore finish
- Lists CF blends and PP among filaments
- Thread made for the stock IR3 V2 hotend
Who it fits
Good fit for
IR3 V2 owners printing carbon-fiber or glass-filled filament, or running long belt jobs, who want spare 0.4mm tips that resist wear.
Who should skip it
Owners of other printers, and IR3 V2 users who only print plain PLA and have never worn out the stock nozzle.
Verdict: A sensible wear-part stock for an IR3 V2 that prints abrasive blends.
IR3 V2 0.4mm nozzle specs
0.4mm bore
The IR3 V2 stock size, so slicer profiles stay as they are.
7.8 Mohs hardened steel
Resists abrasion from CF and glass-filled filaments.
22W/m.k conductivity
Lower than brass; hardened nozzles often need a slightly hotter setting.
Ra<0.4 inner wall
A smoother bore for steadier flow, per IdeaFormer.
Rated to 500℃
The steel's limit; the hotend and thermistor set the usable maximum.
How the IR3 V2 hardened nozzles are made
The nozzles use the same thread as the original IR3 V2 hotend, so they screw in without an adapter. IdeaFormer warns to tighten them before use to stop leaks; do that with the hotend at printing temperature, holding the heater block still. Steel conducts heat less well than brass, so a PLA profile tuned on the stock nozzle may need a few degrees more.
Using five IR3 V2 nozzles in rotation
IdeaFormer's own tip is one nozzle set per filament family: keep one tip for PLA, one for PETG, one for CF blends and so on, so residue from one material does not clog the next. On a belt printer that runs long queues, swapping to a fresh tip when surface quality drops is quicker than clearing a partial clog mid-job.
Before buying the IR3 V2 nozzle 5-pack
Checks.
Check before you buy
- Your printer is an IdeaFormer IR3 V2 with its stock hotend
- You print CF/GF blends or long belt queues on the IR3 V2
- 0.4mm is the IR3 V2 nozzle size you want
The product at a glance
IdeaFormer-3D 0.4mm Belt Printer Hardened Steel Nozzles
Best for: IR3 V2 abrasive filaments
- Primary Material
- Hardened Steel
- Maximum Temperature
- 500℃
- Nozzle Diameter
- 0.4mm
View on Amazon: IdeaFormer-3D 0.4mm Belt Printer Hardened Steel Nozzles Affiliate link
Five 0.4mm hardened steel nozzles for the IdeaFormer IR3 V2: 7.8 Mohs, Ra<0.4 bore, steel rated to 500℃, with CF blends on the filament list.
Pros
- Made for the IR3 V2 hotend thread
- Five tips allow one per material
- Handles abrasive CF blends
Cons
- IR3 V2 only
- Steel needs slightly higher temps than brass
- No hotend temperature limit given
Good fit if
- Your IR3 V2 prints CF or long batches
Skip if
- You own a different printer
Verdict: Wear-resistant spare tips for the IR3 V2 belt printer.
Specifications side by side
| Spec | IdeaFormer-3D 0.4mm Belt Printer Hardened Steel Nozzles |
|---|---|
| Primary Material | Hardened Steel |
| Maximum Temperature | 500℃ |
| Nozzle Diameter | 0.4mm |
| Nozzle Material | Hardened Steel |
| Size | 0.4mm |
Frequently asked questions
Which printer do these IdeaFormer 0.4mm hardened nozzles fit?
The IdeaFormer IR3 V2 conveyor belt printer, with its original hotend.
Can the IR3 V2 hardened nozzles print carbon fiber?
Yes, the listing names PET-CF, PETG-CF and PLA-CF.
Does the 500℃ rating mean the IR3 V2 can print at 500℃?
No, that is the nozzle steel; the hotend sets the real limit.
How many IR3 V2 nozzles come in the pack?
Five 0.4mm hardened steel nozzles.
Featured in
See also
- ideaformer kobra 3 max 0 4mm hardened nozzle 2 pack review
- biqu panda aura a1 rgbw light bar review
- creality sparkx i7 extruder assembly review
- ideaformer 3d pei cool plate qr review
- ideaformer 3d peo pei build plate bambu review
- IdeaFormer-3D 257x257mm Rainbow PEY Textured Review (2026): A Spec-Based Look
- IdeaFormer-3D 310x310mm Textured PEI Plate Review: Specs, Pros and Cons
- IdeaFormer-3D 0.6mm Hardened Steel Nozzle for Kobra 3 Review
- ideaformer 3d conveyor belt 3d printer review
- easycargo 30pcs 3d printer heatsink review
