ELEGOO Saturn PFA Release Film 3-Pack (273x176mm) Review
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This is ELEGOO's first-generation PFA release film in its smaller box: three 273×176mm sheets, 0.127mm thick, for the vat of the Saturn 2, Saturn 8K, Saturn 3, Saturn 4, Saturn 4 Ultra and 4 Ultra 16K, and other 10-inch LCD printers that share that vat size. PFA sits a step above plain FEP in ELEGOO's range, and the page claims a smooth sheet free of wrinkles and bubbles, non-stick release and resistance to resin chemicals and heat. The figure that sets this film apart from ELEGOO's PFA 2.0 is light: this sheet is quoted at 92% UV transmittance, while the 2.0 film is sold at 95%. Three sheets suit an owner of one Saturn who refilms a few times a year and wants a spare on the shelf. ELEGOO gives no heat rating or lifetime figure. Our take relies on ELEGOO's product page and spec fields only.
What stands out
- Three 273×176mm sheets
- 0.127mm PFA
- 92% UV transmittance
- Saturn 2/8K/3/4/4 Ultra/4 Ultra 16K
- No heat or lifetime figures
Who it fits
Good fit for
Owners of a single 10-inch Saturn who want ELEGOO's own PFA in a small pack, with one sheet fitted and two kept as spares.
Who should skip it
Anyone who wants the 95% PFA 2.0 film, needs ACF's lower peel force, or runs several Saturns and goes through film quickly.
Verdict: A modest three-sheet refill of ELEGOO's first PFA film for 10-inch Saturn vats.
ELEGOO PFA 3-pack specs
273×176mm
Cut for the 10-inch Saturn vat; no trimming listed.
0.127mm thick
The same gauge as the ELEGOO PFA 5-pack sheet.
92% UV transmittance
Below the 95% quoted for ELEGOO PFA 2.0.
3 sheets
One to fit now, two spares.
Saturn 2 to 4 Ultra 16K
Plus other 10-inch LCD printers with this vat.
What the ELEGOO PFA sheet is
Each sheet is a loose PFA film that you fit into the Saturn vat frame yourself, tensioning it as you would FEP. ELEGOO pitches PFA for its non-stick surface and for chemical and heat resistance, and says the sheets arrive smooth without wrinkles, scratches or bubbles. The 0.127mm gauge is the same in the 3-pack and the 5-pack of this first-generation film; only the sheet count differs. The listing gives no maximum temperature, no peel-force figure and no estimate of how many prints a sheet lasts.
Refilming a Saturn vat with ELEGOO PFA
Swap the film when it clouds, dents or tears, or when parts start sticking to it instead of the plate. Tension evenly so the sheet sounds tight but not stretched, then check for leaks before pouring resin. After fitting a new sheet, run a short exposure test, since film change can shift the settings that worked before. Keep the spare sheets flat in their packaging so they stay clean and crease-free.
Before buying the ELEGOO PFA 3-pack
Checks.
Check before you buy
- Your Saturn takes the 273×176mm ELEGOO PFA sheet
- 92% transmittance on ELEGOO PFA 1.0 is enough for you
- You can tension a loose ELEGOO PFA sheet yourself
- Three ELEGOO PFA sheets cover your printing for a while
The product at a glance
ELEGOO 3-Pack PFA Film for Saturn Printers
Best for: One Saturn owner
- Dimensions
- 273x176 mm
- Release Film Type
- PFA
- Film Thickness
- 0.127 mm
- Printing Technology
- Resin
- Resolution
- 8K, 16K
View on Amazon: ELEGOO 3-Pack PFA Film for Saturn Printers Affiliate link
ELEGOO PFA film 3-pack (first generation): 273×176mm, 0.127mm, 92% UV transmittance, non-stick and chemical-resistant; for Saturn 2, 8K, 3, 4, 4 Ultra and 4 Ultra 16K.
Pros
- ELEGOO's own Saturn size
- Thin 0.127mm sheet
- Small pack for one printer
Cons
- 92% vs 95% on PFA 2.0
- No heat or lifetime data
Good fit if
- You refilm one Saturn 4 Ultra a few times a year with ELEGOO PFA
Skip if
- You want ELEGOO's 95% PFA 2.0 sheet
Verdict: A three-sheet refill of ELEGOO's first PFA film.
Specifications side by side
| Spec | ELEGOO 3-Pack PFA Film for Saturn Printers |
|---|---|
| Dimensions | 273x176 mm |
| Release Film Type | PFA |
| Film Thickness | 0.127 mm |
| Printing Technology | Resin |
| Resolution | 8K, 16K |
| Size | Saturn 3/4/4 Ultra/4 Ultra 16K-3PCS |
Frequently asked questions
How many sheets are in the ELEGOO PFA 3-pack?
Three sheets of 273×176mm, each 0.127mm thick.
What UV transmittance does this ELEGOO PFA film have?
92% per the listing; ELEGOO's PFA 2.0 film is sold at 95%.
Which printers take the ELEGOO 273×176mm PFA sheet?
The Saturn 2, Saturn 8K, Saturn 3, Saturn 4, Saturn 4 Ultra and 4 Ultra 16K, plus other 10-inch LCD printers with the same vat.
Does the ELEGOO PFA 3-pack come pre-mounted?
No, the sheets are loose and go into your existing vat frame.
Is the ELEGOO PFA 3-pack different from the 5-pack?
Same film, size and thickness; the 5-pack simply has two more sheets.
See also
- elegoo el 3d 327 12k mono LCD replacement review
- ideaformer bambu a1 0 4mm hardened steel nozzle 5 pack review
- hikudiy saturn magnetic flex build plate 224x129mm review
- elegoo 5pcs pfa film saturn review
- elegoo abs like 3 0 pro clear green resin review
- ELEGOO Metal Resin Tank for Saturn 2 and 3 Review: Specs, Pros and Cons
- ELEGOO Saturn PFA Release Film 2.0 3-Pack Review: Who It Fits and Who Should Skip It
- ELEGOO 3D Printer Adhesive Glue 2-Pack Review (2026): A Spec-Based Look
- elegoo saturn 3 ultra 12k review
- shintenchi 3pc high top patio review
