Cretbee Dental Restoration Model Resin (Light Grey, 1kg) Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
Despite "Restoration" in its name, Cretbee's light grey resin is a model material: it prints the crown, bridge and implant models a technician works on, not the crowns that go in a patient. Cretbee is explicit that it is a Class I device that must not be used in the body or mouth. What it offers is rigidity and stability, with real numbers: 87 Shore D hardness, 86 MPa flexural strength and dimensional accuracy of ±30µm. Thin-walled dies and long bridge spans should hold shape during printing and over weeks of use, and Cretbee claims over 99.9% long-term stability at room temperature with no moisture swelling below 60% humidity, which is the main advantage over gypsum models. It runs on most 405nm LCD and DLP printers and has low odor. The listing repeats one bullet and gives no exposure times. For a dental lab that is the key gap; the strength data is better than most. Facts come from Cretbee's listing.
What stands out
- 87 Shore D, 86 MPa flexural strength
- ±30µm accuracy, >99.9% long-term stability
- No swelling below 60% humidity
- Light grey, 1kg, 405nm LCD/DLP
Who it fits
Good fit for
Dental labs and clinics printing crown, bridge and implant models that must stay true to size for weeks.
Who should skip it
Anyone looking for a resin for crowns or temporaries in the mouth, which this is not, or for listed layer times.
Verdict: A rigid, well-specified model resin; just read "restoration" as the type of model it prints.
Cretbee restoration model resin, spec by spec
87 Shore D, 86 MPa flexural
Stiff enough for thin dies and long bridge spans.
±30µm accuracy
Close fit for margins and contacts.
>99.9% stability, no swelling under 60% RH
Models hold size where gypsum can crack or chalk.
Class I, not for oral use
Models and dies only.
405nm LCD/DLP, light grey, 1kg
Grey shows margins clearly on most printers.
Restoration model versus standard dental model resin
Cretbee sells a separate Dental Model resin aimed at ortho work; this restoration line leads with hardness and strength, which matters when dies are seated and removed many times. Light grey is the usual choice for reading margins. It is also sold in a brownish yellow shade. Either way, final crowns need a certified restorative resin.
Printing Cretbee light grey
With no exposure settings listed, begin from a dental model profile for your printer and print a calibration die to check fit against the ±30µm claim. Wash and cure the same way every time, as a stable process is what keeps models consistent. Store prints and the bottle at room temperature away from humidity above 60%.
Before ordering Cretbee restoration resin
A short check for Cretbee's light grey model resin.
Check before you buy
- You print Cretbee models and dies, not oral restorations
- Your printer is a 405nm LCD or DLP for Cretbee resin
- You can tune Cretbee exposure without listed values
The product at a glance
Cretbee Dental Restoration Resin 1kg
Best for: Crown, bridge and implant models
- Resin Type
- Dental Restoration
- Curing Wavelength
- 405nm
- Compatible Technology
- LCD, DLP
- Net Weight
- 1000g
- Application
- Dental restoration models
- Shore Hardness
- 87 Shore D
View on Amazon: Cretbee Dental Restoration Resin 1kg Affiliate link
Cretbee Dental Restoration resin, light grey 1kg: a rigid, low-shrink model resin with 87 Shore D and ±30µm accuracy.
Pros
- Hardness and strength figures listed
- Stable size over time
- Light grey shows margins well
Cons
- Not for oral use despite the name
- No exposure settings
- Repeated bullet on the page
Good fit if
- You print crown and implant models
- You want gypsum-free stable models
Skip if
- You need a restorative resin
Verdict: A stiff, stable dental model resin with real data.
Specifications side by side
| Spec | Cretbee Dental Restoration Resin 1kg |
|---|---|
| Resin Type | Dental Restoration |
| Curing Wavelength | 405nm |
| Compatible Technology | LCD, DLP |
| Net Weight | 1000g |
| Application | Dental restoration models |
| Shore Hardness | 87 Shore D |
| Printing Technology | Resin |
| Size | 1KG |
| Dimensions | 4 × 4 × 10.5 inches |
| Color | Light Grey |
| Model | 3d resin-5401C |
Frequently asked questions
Can Cretbee Dental Restoration resin be used for crowns in the mouth?
No. Cretbee says it is a Class I device that must not be used in the body or oral cavity.
How hard is Cretbee restoration resin?
87 Shore D, with 86 MPa flexural strength.
How accurate is Cretbee light grey model resin?
Cretbee lists ±30µm dimensional accuracy.
Which printers suit Cretbee restoration resin?
Most 405nm LCD and DLP printers, per the listing.
See also
- fauxhammer wargamer resin 5kg review
- anycubic kobra x combo multi color 3d printer review
- anycubic photon p1 max black resin printer review
- best 3d printers under 200
- best 3d printers under 300
- Best 3D Printers Under $500 in 2026: 7 Picks Ranked by Specs
- Best 3D Printers Under $1000: 6 Spec-Based Picks
- 6 Best 3D Printers Under $1500, Compared
- geeetech 3d printer kids review
- unxuey 50pcs 3d printer heatsink review
