Creality Hyper PLA White 2kg Twin Pack Review (2026): A Spec-Based Look
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This Creality Hyper PLA pack holds two 1kg spools of white 1.75mm filament, about 4.4 lb in total, made for high-speed printers. The draw is speed: Creality rates it for 30-600mm/s, with a high-flow, fast-cooling formula meant to keep layers clean when a K1, Bambu or Neptune 4 runs flat out, while still printing well at normal speed. Tolerance is ±0.03mm, and Creality claims it is tougher than standard PLA with tensile strength above ABS, without test figures. The listing names a long fit list, from the K1, K1 Max and Ender 3 V3 KE and SE to Bambu, Prusa, Neptune 4, Kobra 2, AnkerMake M5 and QIDI Max3. No nozzle or bed temperatures are given on this page. Facts here are from Creality's listing.
What stands out
- Rated 30-600mm/s
- Two 1kg white spools in one pack
- Long named printer fit list
Who it fits
Good fit for
Owners of fast printers who burn through white PLA for prototypes, cosplay bases, or parts they will paint.
Who should skip it
Anyone who needs RFID for a CFS, colors other than white, or temperatures printed on the page.
Verdict: A practical white bulk pack for fast printers; bring your own temperature profile.
Hyper PLA twin pack specs
2 x 1kg white
Two spools, about 4.4 lb shipped.
30-600mm/s
Covers slow detail work and full-speed prints.
±0.03mm on 1.75mm
Standard tolerance for PLA.
High flow, fast cooling
Formula tuned for high-speed layers.
Toughness above ABS claim
No tensile numbers given.
No RFID, no temps on page
Use a Hyper PLA preset or generic PLA.
Formula and winding
Creality says Hyper PLA melts and flows readily for high volumetric speeds, then sets quickly so overhangs hold. Winding is kept neat to avoid tangles and jams on long prints. White is the most paint-friendly base, so the pack suits parts that will be primed later. This version carries no RFID chip; Creality sells separate RFID Hyper PLA for the CFS.
Printing white Hyper PLA fast
Creality Print and most slicers include a Hyper PLA preset; use it rather than generic PLA when running above 300mm/s, and raise the nozzle temperature a little as speed climbs. White shows layer lines more than dark colors, so slow the outer wall for visible parts. Keep the second spool sealed until the first is done.
Before you buy
Checks for the Hyper PLA white twin pack.
Check before you buy
- Your machine prints Hyper PLA at high speed
- White suits your parts
- You do not need RFID
- You use 2kg before it absorbs moisture
The product at a glance
Creality Hyper PLA 1.75mm Filament
Best for: High-speed white PLA in bulk
- Material Type
- PLA
- Filament Diameter
- 1.75mm
- Net Weight
- 2KG
- Max Print Speed
- 600mm/s
- Dimensional Accuracy
- +/- 0.03mm
- Features
- High Speed
View on Amazon: Creality Hyper PLA 1.75mm Filament Affiliate link
Creality Hyper PLA white twin pack: 2 x 1kg 1.75mm, 30-600mm/s, ±0.03mm, high-flow fast-cooling formula, wide named printer fit; no RFID, no temps listed.
Pros
- Rated up to 600mm/s
- Two spools of white
- Broad printer fit
Cons
- No temperatures on page
- No RFID chip
Good fit if
- You print fast and often
- You paint white parts
Skip if
- You need CFS RFID
Verdict: A good white bulk pack for fast printers.
Specifications side by side
| Spec | Creality Hyper PLA 1.75mm Filament |
|---|---|
| Material Type | PLA |
| Filament Diameter | 1.75mm |
| Net Weight | 2KG |
| Max Print Speed | 600mm/s |
| Dimensional Accuracy | +/- 0.03mm |
| Compatible Material | PLA |
| Print Speed | 600mm/s |
| Features | High Speed |
| Surface Finish | Smooth |
| Weight | 4.41 pounds |
| Size | Pla |
| Color | White+white |
| Model | Hyper PLA |
Frequently asked questions
How fast can Creality Hyper PLA print?
30-600mm/s, per Creality.
How much filament is in the pack?
Two 1kg spools of white, 1.75mm.
Does it have RFID for the CFS?
Not this listing; Creality sells RFID Hyper PLA separately.
Which printers does Creality list?
K1, K1 Max, Ender 3 V3 KE/SE, Bambu, Prusa, Neptune 4, Kobra 2, AnkerMake M5/M5C, QIDI Max3 and more.
Twin pack or a single 1kg spool?
Choose the twin pack if you print a lot of white; choose a single spool to try Hyper PLA first.
See also
- isanghu carbon fiber asa filament review
- elegoo black petg filament review
- elegoo silk pla shiny gold filament review
- creality pla plus filament review
- creality silk pla filament review
- Creality Hyper RFID PLA Filament Review: Specs, Pros and Cons
- Creality CR-ABS 1.75mm 1kg Filament Review: Who It Fits and Who Should Skip It
- Creality 1.75mm 95A TPU Filament Review: Specs, Pros and Cons
- creality k2 combo 3d printer review
- unxuey 50pcs 3d printer heatsink review
