As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

Best 3D Printer Resins for Miniatures in 2026: 7 Picks Ranked by Specs

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

Miniature resin has two jobs that pull against each other: capture tiny detail and survive being dropped, painted and played with. Our top pick is AmeraLabs TGM-7: made for wargaming on 4K-12K printers, with a bit of flex so thin swords survive and a hard, paint-ready surface. SUNLU's 14K standard 2kg is the cheapest per kilo for display minis. NOVA3D's TGM is drillable for magnets, RESIONE Tough74 suits poseable figures, SUNLU's 3kg ABS-like and 3DRS's 4kg RPG resin cover big armies, and WARGAMER by FauxHammer suits converters. Listing claims are quoted, not lab-tested.

Our top pick: AmeraLabs TGM-7 Tough SLA Resin 1L.

Quick picks

#ProductBest forPrice
1 AmeraLabs TGM-7 Tough SLA Resin 1L Best overall Best overall Check price of AmeraLabs TGM-7 Tough SLA Resin 1L on Amazon
2 NOVA3D 1KG TGM Tough Resin Best for board games Best for board games Check price of NOVA3D 1KG TGM Tough Resin on Amazon
3 Resione Tough74 Tough Grey Resin Best for poseable figures Best for poseable figures Check price of Resione Tough74 Tough Grey Resin on Amazon
4 SUNLU 14K Standard Resin 2000g Best budget Best budget Check price of SUNLU 14K Standard Resin 2000g on Amazon
5 SUNLU ABS-Like Matte Resin 3kg Best tough bulk Best tough bulk Check price of SUNLU ABS-Like Matte Resin 3kg on Amazon
6 3DRS Table Top RPG Resin 4kg Best for RPG sets Best for RPG sets Check price of 3DRS Table Top RPG Resin 4kg on Amazon
7 WARGAMER Grey Miniature Resin 5 x 1kg Best premium Best premium Check price of WARGAMER Grey Miniature Resin 5 x 1kg on Amazon

The best fit for you

Our 7 picks

Best overall

AmeraLabs TGM-7 Tough SLA Resin 1L

Best for: Best overall

Application
✓ Miniatures
Resin Type
Tough
Compatible Technology
LCD, DLP, SLA
Net Weight
1kg
Features
Low Odor, Fast Curing
Resolution
8K, 12K, 4K

View on Amazon: AmeraLabs TGM-7 Tough SLA Resin 1L Affiliate link

Read our full review

AmeraLabs TGM-7, 1kg grey: a wargaming resin for 4K, 8K and 12K LCD, DLP and SLA printers with a bit of flex so minis survive shipping, painting and play, and a hard, non-sticky surface after a short post-cure.

Pros

  • Flex that saves thin swords and spears
  • Hard, paint-ready surface
  • Maker offers one-to-one print support

Cons

  • Costly per kilo
  • Listing compares itself to Creality resin oddly

Good fit if

  • You sell painted minis and cannot have breakage
  • You print thin spears and banners

Skip if

  • You print terrain by the kilo

Verdict: A mini-specific resin that balances detail and flex.

Best for board games

NOVA3D 1KG TGM Tough Resin

Best for: Best for board games

Curing Wavelength
405nm
Compatible Technology
LCD
Net Weight
1kg
Cleaning Method
Alcohol
Application
Tabletop gaming miniatures
Printing Technology
Resin

View on Amazon: NOVA3D 1KG TGM Tough Resin Affiliate link

Read our full review

NOVA3D 16K TGM resin, 1000g beige: built for board game and tabletop pieces, with a matte surface that takes paint and drilling, high toughness, and alcohol cleanup in one pass.

Pros

  • Drillable for magnet slots
  • Matte, paintable surface
  • Made for 16K detail

Cons

  • Claim of no post-cure needed is unusual: cure anyway if parts feel tacky
  • Beige only here

Good fit if

  • You drill magnets into game pieces
  • You print board game sets on a 16K printer

Skip if

  • You want water cleanup

Verdict: Tough, drillable resin for game pieces.

Best for poseable figures

Resione Tough74 Tough Grey Resin

Best for: Best for poseable figures

Application
✓ Miniatures
Resin Type
Tough
Net Weight
1kg
Printing Technology
Resin
Features
Low Shrinkage
Color
Grey

View on Amazon: Resione Tough74 Tough Grey Resin Affiliate link

RESIONE Tough74 grey, 1kg: rigid during printing so thin supports hold, tough and wear resistant once cured, with smooth surfaces and joints made for articulated action figures and drop-prone minis.

Pros

  • Joints that last
  • Wear resistant
  • Supports stay rigid while printing

Cons

  • Low stock
  • No numeric specs

Good fit if

  • You print articulated dragons
  • Your minis fall off the table often

Skip if

  • You want the cheapest bottle

Verdict: Tough resin for minis that move or fall.

Best budget

SUNLU 14K Standard Resin 2000g

Best for: Best budget

Application
✓ Miniatures
Resin Type
Standard
Curing Wavelength
405nm
Net Weight
2000g
Cleaning Method
Alcohol or ethanol
Printing Technology
Resin

View on Amazon: SUNLU 14K Standard Resin 2000g Affiliate link

SUNLU 14K standard resin, 2000g grey: a matte, high-precision standard resin aimed at mini detail, with lower odor than many resins and low shrinkage on 405nm printers.

Pros

  • Cheapest per kilo among mini resins here
  • Matte surface shows detail
  • Low odor

Cons

  • Standard resin: thin parts snap
  • Second SUNLU 14K 2kg listing costs more for the same resin

Good fit if

  • You print lots of display minis and busts
  • You want 14K-level detail cheaply

Skip if

  • Your minis get played with roughly

Verdict: Low-cost matte detail resin.

Best tough bulk

SUNLU ABS-Like Matte Resin 3kg

Best for: Best tough bulk

Application
✓ Miniatures
Resin Type
ABS-Like
Curing Wavelength
405nm
Compatible Technology
LCD, DLP, SLA
Net Weight
3kg
Printing Technology
Resin

View on Amazon: SUNLU ABS-Like Matte Resin 3kg Affiliate link

SUNLU ABS-like resin sold as 14K, 3000g grey: less brittle than standard resin with abrasion resistance, a matte surface, fast curing and low odor; the bullets are SUNLU's general ABS-like text, the 14K claim is in the title.

Pros

  • 3kg of tough resin
  • Matte finish
  • Low odor

Cons

  • 14K precision only in the title
  • Large spend

Good fit if

  • You print whole squads for tabletop play
  • You want tougher minis than standard resin

Skip if

  • You only print a few figures

Verdict: Bulk ABS-like resin for gaming armies.

Best for RPG sets

3DRS Table Top RPG Resin 4kg

Best for: Best for RPG sets

Application
✓ Miniatures
Compatible Technology
LCD, DLP, SLA
Net Weight
4kg
Printing Technology
Resin
Features
High Precision, Low Shrinkage, Fast Curing

View on Amazon: 3DRS Table Top RPG Resin 4kg Affiliate link

Read our full review

3DRS Table Top RPG resin, 4kg: medium grey, fast curing and low odor, non-brittle and impact resistant, with high green strength so complex designs need fewer supports.

Pros

  • Fewer supports thanks to green strength
  • 4kg for big campaigns
  • Non-brittle

Cons

  • High upfront price
  • No numeric data

Good fit if

  • You print monsters for a long D&D campaign
  • You hate support cleanup

Skip if

  • You print one model a week

Verdict: A 4kg RPG resin with fewer supports.

Best premium

WARGAMER Grey Miniature Resin 5 x 1kg

Best for: Best premium

Application
✓ Miniatures
Resin Type
Water-Washable
Net Weight
5kg
Cleaning Method
Water or IPA
Printing Technology
Resin
Color
Grey

View on Amazon: WARGAMER Grey Miniature Resin 5 x 1kg Affiliate link

Read our full review

WARGAMER by FauxHammer, 5 x 1kg grey: minis that cut and shave like plastic kits for conversions, stay tough and flexible over time, keep sharp detail, and wash in water or IPA.

Pros

  • Cut and convert like plastic kits
  • Water or IPA cleanup
  • Keeps strength over time

Cons

  • Highest price here by far
  • Five bottles at once

Good fit if

  • You kitbash and convert wargame armies
  • You want water cleanup with tough minis

Skip if

  • You print a few test models

Verdict: A converter's resin for big armies.

Specifications side by side

Spec AmeraLabs TGM-7 Tough SLA Resin 1L NOVA3D 1KG TGM Tough Resin Resione Tough74 Tough Grey Resin SUNLU 14K Standard Resin 2000g SUNLU ABS-Like Matte Resin 3kg 3DRS Table Top RPG Resin 4kg WARGAMER Grey Miniature Resin 5 x 1kg
Resin Type Tough not stated Tough Standard ABS-Like not stated Water-Washable
Curing Wavelength not stated 405nm not stated 405nm 405nm not stated not stated
Compatible Technology LCD, DLP, SLA LCD not stated not stated LCD, DLP, SLA LCD, DLP, SLA not stated
Net Weight 1kg 1kg 1kg 2000g 3kg 4kg 5kg
Cleaning Method not stated Alcohol not stated Alcohol or ethanol not stated not stated Water or IPA
Application Tabletop miniatures Tabletop gaming miniatures Articulated figures, miniatures Miniatures Miniatures Miniatures, models, terrain Miniatures
Printing Technology SLA Resin Resin Resin Resin Resin Resin
Compatible Material not stated not stated not stated not stated ABS not stated not stated
Features Low Odor, Fast Curing High Speed, High Precision Low Shrinkage High Precision, Fast Curing High Precision High Precision, Low Shrinkage, Fast Curing not stated
Color Grey, 1 Kg Beige Grey 14K Grey 2000g High Precision 14K ABS-Like 3KG Grey not stated Grey
Size 1 Liter 1KG Tough74 L-2000g XL-3000g 4KG 1KG
Finish not stated not stated not stated Matte Matte not stated not stated
Surface Finish not stated not stated Smooth Smooth Smooth not stated not stated
Resolution 8K, 12K, 4K 16K not stated 14K 14K not stated not stated
Dimensions not stated 3.94 × 3.94 × 9 inches 9 × 3 × 3 inches not stated not stated not stated 9.25 × 4 × 4 inches
Weight not stated 2.2 pounds 2.6 pounds 4.41 pounds 6.61 pounds not stated 11 pounds
Model 4779049450331 not stated Tough74 Grey 1kg 14K Standard Resin SUNLU 14K ABS Like Resin not stated WARGAMER-5KGS-GREY-V2

Picking a miniature resin

  1. Flex beats hardness for gaming

    AmeraLabs, WARGAMER and RESIONE all stress parts that bend rather than chip.

  2. Supports cost time

    3DRS claims high green strength for fewer supports; RESIONE says Tough74 stays rigid during printing.

  3. Plan for magnets

    NOVA3D lists drilling and screw holes without cracking.

  4. Buy bulk only after a test

    Try a 1kg bottle before committing to 3-5kg.

Frequently asked questions

Is AmeraLabs TGM-7 flexible?

AmeraLabs says it has a bit of flex so minis survive shipping, painting and play.

Can NOVA3D TGM resin be drilled?

Yes, NOVA3D lists drilling and screws without fracturing.

Does WARGAMER resin need IPA?

No, it washes with water or IPA.

Is SUNLU 14K resin tough?

The 14K standard resin is a detail resin; SUNLU's 14K ABS-like version is the tougher one.

See also