As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

ANYCUBIC Standard Resin Plus 1kg Review (2026): A Spec-Based Look

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

Standard Resin Plus is ANYCUBIC's upgrade of its classic standard resin, and the listing puts numbers on the changes: molding accuracy improves from ±0.2mm to ±0.1mm, viscosity drops to 200 cps at 25°C, and extensibility reaches 18.2%. ANYCUBIC also claims better adhesion, higher success rates, more hardness and toughness, less odor and easier cleaning, and it targets 8K, 14K and 16K-capable LCD, DLP and SLA printers. The HD Gray color is a neutral base for painting. Two listing errors stand out: a 'flexural modulus of 1599.33%', which is not a valid unit, and a 3.53 oz spec weight for a 1kg bottle. We wrote this from ANYCUBIC's page; we did not print with it.

What stands out

  • Accuracy stated at ±0.1mm
  • 200 cps viscosity at 25°C
  • 18.2% extensibility for a standard resin

Who it fits

Good fit for

Hobbyists printing display miniatures, busts and terrain on high-resolution LCD printers who want a cheap grey resin with real figures behind it.

Who should skip it

Anyone printing parts that must flex or take drops: ABS-Like 3.0 lists 30% elongation and drills without cracking. Also skip it if you want to avoid IPA; it is not water washable.

Verdict: A solid, well-quantified standard resin for display work; step up to ABS-Like for anything functional.

What the listing states

±0.1mm molding accuracy

Up from ±0.2mm on the classic resin, for crisper small details.

200 cps at 25°C

A thin resin that refills under the plate quickly.

18.2% extensibility

Somewhat less brittle than a typical standard resin.

8K/14K/16K-capable printers

Tuned for current high-resolution screens; 405nm.

Formula and listing errors

ANYCUBIC asks you to shake the bottle thoroughly so the components and color paste mix, otherwise colors print unevenly. The '1599.33%' flexural modulus is a garbled figure (modulus is measured in MPa), and the 3.53 oz spec weight is a data error for a 1kg bottle; the model code is SBZHG-10-US-0317.

Printing and cleaning

Pick the matching preset in Photon Workshop on ANYCUBIC printers; elsewhere, run an exposure test. Wash in IPA and post-cure. The lower viscosity should help large prints release cleanly from the film.

Before buying

Checks.

Check before you buy

  • Your printer cures at 405nm
  • You print display pieces, not load-bearing parts
  • You have IPA and a curing station
  • You will shake the bottle before every print

The product at a glance

ANYCUBIC Standard Resin Plus 1kg

Best for: Display prints

Resin Type
Standard
Curing Wavelength
405nm
Compatible Technology
LCD, DLP, SLA
Net Weight
1000g
Features
High Speed, High Precision
Size
1KG

View on Amazon: ANYCUBIC Standard Resin Plus 1kg Affiliate link

ANYCUBIC Standard Resin Plus, HD Gray, 1kg: ±0.1mm accuracy, 200 cps viscosity, 18.2% extensibility, lighter smell, for 8K-16K-capable LCD/DLP/SLA printers at 405nm.

Pros

  • Concrete accuracy and viscosity figures
  • Low price
  • Neutral grey for painting

Cons

  • Garbled modulus figure
  • Spec weight error
  • IPA wash

Good fit if

  • You print painted display minis
  • You run an 8K-16K printer

Skip if

  • You print functional parts

Verdict: A measured step up from basic standard resin.

Specifications side by side

Spec ANYCUBIC Standard Resin Plus 1kg
Resin Type Standard
Curing Wavelength 405nm
Compatible Technology LCD, DLP, SLA
Net Weight 1000g
Printing Technology SLA
Features High Speed, High Precision
Size 1KG
Resolution 8K, 16K, 14K
Dimensions 1.3 × 1.3 × 4.3 inches
Weight 3.53 ounces
Color HD Gray
Model SBZHG-10-US-0317

Frequently asked questions

How accurate is ANYCUBIC Standard Resin Plus?

ANYCUBIC states ±0.1mm molding accuracy, up from ±0.2mm on its classic standard resin.

What viscosity does ANYCUBIC Standard Resin Plus HD Gray have?

200 cps at 25°C, according to the listing.

Is ANYCUBIC Standard Resin Plus tougher than the classic standard resin?

ANYCUBIC says it has more hardness and toughness and lists 18.2% extensibility; it is still a standard resin, not an ABS-like one.

Why does the ANYCUBIC Standard Resin Plus listing say 3.53 ounces?

That spec weight is a data error; the product is a 1kg bottle.

See also